-
Tue Aug 28 2012 Joe Jin <joe.jin@oracle.com> [2.6.39-200.29.3.el5uek]
- htrimer: fix kabi break. (Joe Jin)
- timekeeping: Add missing update call in timekeeping_resume() (Thomas
Gleixner)
- hrtimer: Update hrtimer base offsets each hrtimer_interrupt (John Stultz)
- timekeeping: Provide hrtimer update function (Thomas Gleixner)
- hrtimers: Move lock held region in hrtimer_interrupt() (Thomas Gleixner)
- timekeeping: Maintain ktime_t based offsets for hrtimers (Thomas Gleixner)
- timekeeping: Fix leapsecond triggered load spike issue (John Stultz)
- hrtimer: Provide clock_was_set_delayed() (John Stultz)
- time: Move common updates to a function (Thomas Gleixner)
- timekeeping: Fix CLOCK_MONOTONIC inconsistency during leapsecond (John
Stultz)
- ntp: Correct TAI offset during leap second (Richard Cochran)
- ntp: Fix leap-second hrtimer livelock (John Stultz)
- Revert "3.0.x: hrtimer: Fix clock_was_set so it is safe to call from irq
context" (Joe Jin)
- Revert "3.0.x: time: Fix leapsecond triggered hrtimer/futex load spike issue"
(Joe Jin)
- Revert "3.0.x: hrtimer: Update hrtimer base offsets each hrtimer_interrupt"
(Joe Jin)
-
Sat Jul 14 2012 Joe Jin <joe.jin@oracle.com> [2.6.39-200.29.2.el5uek]
- epoll: clear the tfile_check_list on -ELOOP (Joe Jin) {CVE-2012-3375}
- Don't limit non-nested epoll paths (Jason Baron)
- epoll: kabi fixups for epoll limit wakeup paths (Joe Jin) {CVE-2011-1083}
- epoll: limit paths (Jason Baron) {CVE-2011-1083}
- cred: copy_process() should clear child->replacement_session_keyring (Oleg
Nesterov) {CVE-2012-2745}
-
Fri Jul 06 2012 Joe Jin <joe.jin@oracle.come> [2.6.39-200.29.1.el5uek]
- 3.0.x: hrtimer: Update hrtimer base offsets each hrtimer_interrupt (John Stultz)
- 3.0.x: time: Fix leapsecond triggered hrtimer/futex load spike issue (John Stultz)
- 3.0.x: hrtimer: Fix clock_was_set so it is safe to call from irq context (John Stultz)
- Revert "Fix clock_was_set so it is safe to call from atomic"
- Revert "Fix leapsecond triggered hrtimer/futex load spike issue"
- Revert "3.0.x: hrtimer: Update hrtimer base offsets each hrtimer_interrupt"
-
Fri Jul 06 2012 Joe Jin <joe.jin@oracle.come> [2.6.39-200.28.1.el5uek]
- Update hrtimer base offsets each hrtimer_interrupt(John Stultz) [Orabug: 14264454]
-
Thu Jul 05 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-200.27.1.el5uek]
- SPEC: replace kernel-ovs to kernel-uek (Guru Anbalagane) [Orabug: 14238939]
-
Thu Jul 05 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.26.1.el5uek]
- Fix leapsecond triggered hrtimer/futex load spike issue (John Stultz)
- Fix clock_was_set so it is safe to call from atomic (John Stultz)
-
Wed Jul 04 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.25.1.el5uek]
- dm-nfs: force random mode for the backend file (Joe Jin) [Orabug: 14092678]
-
Fri Jun 22 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-200.24.1.el5uek]
- Revert "Add Oracle VM guest messaging driver" (Guru Anbalagane) [Orabug: 14233627}
-
Thu Jun 21 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-200.23.1.el5uek]
- SPEC: add block/net modules to list used by installer (Guru Anbalagane)
[Orabug: 14224837]
-
Thu Jun 21 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.22.1.el5uek]
- NFSv4: include bitmap in nfsv4 get acl data (Andy Adamson) {CVE-2011-4131}
- ocfs2:btrfs: aio-dio-loop changes broke setrlimit behavior [orabug 14207636]
(Dave Kleikamp)
- Add Oracle VM guest messaging driver (Zhigang Wang)
- thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE (Andrea Arcangeli)
[Orabug: 14217003]
-
Tue Jun 19 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.21.0.el5uek]
- KVM: Fix buffer overflow in kvm_set_irq() (Avi Kivity) [Bugdb: 13966]
{CVE-2012-2137}
- net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
(Jason Wang) [Bugdb: 13966] {CVE-2012-2136}
- mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race
condition (Andrea Arcangeli) [Bugdb: 13966] {CVE-2012-2373}
- KVM: lock slots_lock around device assignment (Alex Williamson) [Bugdb:
13966] {CVE-2012-2121}
- KVM: unmap pages from the iommu when slots are removed (Alex Williamson)
[Bugdb: 13966] {CVE-2012-2121}
- KVM: introduce kvm_for_each_memslot macro (Xiao Guangrong) [Bugdb: 13966]
- fcaps: clear the same personality flags as suid when fcaps are used (Eric
Paris) [Bugdb: 13966] {CVE-2012-2123}
-
Fri Jun 15 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.20.0.el5uek]
- Update lpfc version for 8.3.5.68.6p driver release (Martin K. Petersen)
- Fix system hang due to bad protection module parameters (CR 130769) (Martin
K. Petersen)
- oracleasm: Data integrity support (Martin K. Petersen)
- sd: Allow protection_type to be overridden (Martin K. Petersen)
- SCSI: Fix two bugs in DIX retry handling (Martin K. Petersen)
- sd: Avoid remapping bad reference tags (Martin K. Petersen)
- block: Fix bad range check in bio_sector_offset (Martin K. Petersen)
-
Thu Jun 14 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.19.0.el5uek]
- xen/netback: Calculate the number of SKB slots required correctly (Simon
Graham)
-
Fri Jun 08 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.18.0.el5uek]
- e1000e: disable rxhash when try to enable jumbo frame also rxhash and rxcsum
have enabled (Joe Jin)
-
Wed Jun 06 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.17.0.el5uek]
- mm: reduce the amount of work done when updating min_free_kbytes (Mel Gorman)
[Orabug: 14073214]
- ocfs2: clear unaligned io flag when dio fails (Junxiao Bi) [Orabug: 14063941]
- aio: make kiocb->private NUll in init_sync_kiocb() (Junxiao Bi) [Orabug:
14063941]
- vmxnet3: cap copy length at size of skb to prevent dropped frames on tx (Neil
Horman) [Orabug: 14159701]
- mm/mempolicy.c: refix mbind_range() vma issue (KOSAKI Motohiro) [Orabug:
14149364]
- mm/mempolicy.c: fix pgoff in mbind vma merge (Caspar Zhang) [Orabug:14149364]
-
Tue Jun 05 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.16.0.el5uek]
- xen/gntdev: Fix merge error. (Konrad Rzeszutek Wilk)
-
Fri Jun 01 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.15.0.el5uek]
- xen: expose host uuid via sysfs. (Zhigang Wang)
-
Wed May 30 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.14.0.el5uek]
- SPEC: upgrade preserve rhck as a boot kernel (Kevin Lyons) [Orabug: 14065209]
- hxge: update driver to 1.3.4 (Maxim Uvarov) [Orabug: 14134149]
- SPEC: v2.6.39-200.12.0 (Maxim Uvarov)
- Revert "bnx2x: correction to firmware interface" (Joe Jin)
- cnic: fix bnx2fc_constants.h path (Maxim Uvarov)
- bnx2x: PFC fix (Yaniv Rosner)
- cnic: Fix parity error code conflict (Michael Chan)
- bnx2x: Clear MDC/MDIO warning message (Yaniv Rosner)
- bnx2x: Fix BCM578x0-SFI pre-emphasis settings (Yaniv Rosner)
- bnx2x: Fix BCM57810-KR AN speed transition (Yaniv Rosner)
- cnic: Re-init dev->stats_addr after chip reset (Michael Chan)
- config: turn on CONFIG_HVC_XEN_FRONTEND (Maxim Uvarov) [Orabug: 14064174]
- ixgbe: Don't set ip checksum if did not enable tso. (Joe Jin)
- Revert "x86, efi: Pass a minimal map to SetVirtualAddressMap()" (Maxim
Uvarov) [Orabug: 14076004]
- r8169: add firmware files (Joe Jin)
- e1000e: fix build warning. (Joe Jin)
- bnx2x: file build warning (Joe Jin)
- 8139too: Add 64bit statistics (Junchang Wang)
- net: export netdev_stats_to_stats64 (Eric Dumazet)
- r8169: enable transmit time stamping. (Joe Jin)
- r8169: stop using net_device.{base_addr, irq}. (Francois Romieu)
- r8169: move the driver removal method to the end of the driver file.
(Francois Romieu)
- r8169: fix unsigned int wraparound with TSO (Julien Ducourthial)
- 8139cp: set intr mask after its handler is registered (Jason Wang)
- r8169: enable napi on resume. (Artem Savkov)
- r8169: runtime resume before shutdown. (françois romieu)
- r8169: add 64bit statistics. (Junchang Wang)
- r8169: corrupted IP fragments fix for large mtu. (françois romieu)
- r8169: spinlock redux. (Francois Romieu)
- r8169: avoid a useless work scheduling. (Francois Romieu)
- r8169: move task enable boolean to bitfield. (Francois Romieu)
- r8169: bh locking redux and task scheduling. (Francois Romieu)
- r8169: fix early queue wake-up. (Francois Romieu)
- r8169: remove work from irq handler. (Joe Jin)
- r8169: missing barriers. (Francois Romieu)
- r8169: irq mask helpers. (Francois Romieu)
- r8169: factor out IntrMask writes. (Francois Romieu)
- r8169: stop delaying workqueue. (Francois Romieu)
- r8169: remove rtl8169_reinit_task. (Francois Romieu)
- r8169: remove hardcoded PCIe registers accesses. (Francois Romieu)
- 8139cp: fix missing napi_gro_flush. (françois romieu)
- 8139cp/8139too: do not read into reserved registers (Jason Wang)
- r8169: fix Config2 MSIEnable bit setting. (françois romieu)
- r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.
(françois romieu)
- r8169: Rx FIFO overflow fixes. (françois romieu)
- corral some wayward N/A fw_version dust bunnies (Rick Jones)
- ethernet: Convert MAC_ADDR_LEN uses to ETH_ALEN (Joe Jin)
- sweep the floors and convert some .get_drvinfo routines to strlcpy (Joe Jin)
- r8169: check firmware content sooner. (Francois Romieu)
- r8169: support new firmware format. (Hayes Wang)
- r8169: explicit firmware format check. (Francois Romieu)
- r8169: move the firmware down into the device private data. (Francois Romieu)
- r8169: increase the delay parameter of pm_schedule_suspend (hayeswang)
- r8169: fix wrong eee setting for rlt8111evl (hayeswang)
- r8169: fix driver shutdown WoL regression. (françois romieu)
- Add ethtool -g support to 8139cp (Rick Jones)
- sc92031: use standard #defines from mii.h. (françois romieu)
- r8169: jumbo fixes. (Francois Romieu)
- r8169: expand received packet length indication. (Francois Romieu)
- r8169: support new chips of RTL8111F (Hayes Wang)
- r8169: do not enable the TBI for anything but the original 8169. (Francois
Romieu)
- r8169: remove erroneous processing of always set bit. (Francois Romieu)
- r8169: fix WOL setting for 8105 and 8111evl (Hayes Wang)
- r8169: add MODULE_FIRMWARE for the firmware of 8111evl (Hayes Wang)
- r8169: fix the reset setting for 8111evl (Hayes Wang)
- r8169: define the early size for 8111evl (Hayes Wang)
- r8169: convert to SKB paged frag API. (Ian Campbell)
- 8139cp: convert to SKB paged frag API. (Ian Campbell)
- net: remove use of ndo_set_multicast_list in realtek drivers (Joe Jin)
- r8169 : MAC address change fix for the 8168e-vl. (françois romieu)
- r8169: use pci_dev->subsystem_{vendor|device} (Sergei Shtylyov)
- r8169: fix sticky accepts packet bits in RxConfig. (Francois Romieu)
- r8169: adjust the RxConfig settings. (Hayes Wang)
- r8169: don't enable rx when shutdown. (Hayes Wang)
- r8169: fix wake on lan setting for non-8111E. (Hayes Wang)
- r8169: support RTL8111E-VL. (Hayes Wang)
- r8169: add ERI functions. (Hayes Wang)
- r8169: modify the flow of the hw reset. (Hayes Wang)
- r8169: adjust some registers. (Hayes Wang)
- r8169: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)
- ixgbevf: print MAC via printk format specifier (Danny Kukawka)
- ixgbevf: Update copyright notices (Greg Rose)
- ixgbevf: Fix mailbox interrupt ack bug (Greg Rose)
- ixgbevf: make operations tables const (Stephen Hemminger)
- ixgbevf: fix sparse warnings (Stephen Hemminger)
- ixgbevf: make ethtool ops and strings const (Stephen Hemminger)
- ixgbevf: Prevent possible race condition by checking for message (Greg Rose)
- ixgbevf: Fix register defines to correctly handle complex expressions
(Alexander Duyck)
- ixgbevf: Update release version (Greg Rose)
- ixgbevf: Fix broken trunk vlan (Greg Rose)
- ixgbevf: convert to ndo_fix_features (Joe Jin)
- ixgbevf: Check if EOP has changed before using it (Greg Rose)
- ixgbe: Correct flag values set by ixgbe_fix_features (Joe Jin)
- ixgbe: fix typo in enumeration name (Don Skidmore)
- ixgbe: Add support for enabling UDP RSS via the ethtool rx-flow-hash command
(Joe Jin)
- ixgbe: Whitespace cleanups (Joe Jin)
- ixgbe: Two minor fixes for RSS and FDIR set queues functions (Alexander
Duyck)
- ixgbe: drop err_eeprom tag which is at same location as err_sw_init
(Alexander Duyck)
- ixgbe: Move poll routine in order to improve readability (Alexander Duyck)
- ixgbe: cleanup logic for the service timer and VF hang detection (Alexander
Duyck)
- ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
(Alexander Duyck)
- ixgbe: Place skb on first buffer_info structure to avoid using stack space
(Joe Jin)
- ixgbe: Use packets to track Tx completions instead of a seperate value
(Alexander Duyck)
- ixgbe: Modify setup of descriptor flags to avoid conditional jumps (Alexander
Duyck)
- ixgbe: Make certain that all frames fit minimum size requirements (Alexander
Duyck)
- ixgbe: cleanup logic in ixgbe_change_mtu (Alexander Duyck)
- ixgbe: dcb: use DCB config values for FCoE traffic class on open (John
Fastabend)
- ixgbe: Fix race condition where RX buffer could become corrupted. (Atita
Shirwaikar)
- ixgbe: use typed min/max functions where possible (Jesse Brandeburg)
- ixgbe: fix obvious return value bug. (Don Skidmore)
- ixgbe: Replace eitr_low and eitr_high with static values in ixgbe_update_itr
(Alexander Duyck)
- ixgbe: Do not disable read relaxed ordering when DCA is enabled (Alexander
Duyck)
- ixgbe: Simplify logic for ethtool loopback frame creation and testing
(Alexander Duyck)
- ixgbe: Add iterator for cycling through rings on a q_vector (Alexander Duyck)
- ixgbe: Allocate rings as part of the q_vector (Alexander Duyck)
- ixgbe: Drop unnecessary napi_schedule_prep and spare blank line from
ixgbe_intr (Alexander Duyck)
- ixgbe: Default to queue pairs when number of queues is less than CPUs
(Alexander Duyck)
- ixgbe: Correct Adaptive Interrupt Moderation so that it will change values
(Alexander Duyck)
- ixgbe: Address issues with Tx WHTRESH value not being set correctly
(Alexander Duyck)
- ixgbe: Reorder adapter contents for better cache utilization (Joe Jin)
- ixgbe: Do no clear Tx status bits since eop_desc provides enough info
(Alexander Duyck)
- ixgbe: remove tie between NAPI work limits and interrupt moderation (Jeff
Kirsher)
- ixgbe: dcb: check setup_tc return codes (John Fastabend)
- ixgbe: Fix comments that are out of date or formatted incorrectly (Alexander
Duyck)
- ixgbe: fix spelling errors (Don Skidmore)
- ixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring
(Alexander Duyck)
- ixgbe: Combine post-DMA processing of sk_buff fields into single function
(Alexander Duyck)
- ixgbe: Drop the _ADV of descriptor macros since all ixgbe descriptors are ADV
(Alexander Duyck)
- ixgbe: Add function for testing status bits in Rx descriptor (Alexander
Duyck)
- ixgbe: Let the Rx buffer allocation clear status bits instead of cleanup (Joe
Jin)
- ixgbe: Address fact that RSC was not setting GSO size for incoming frames
(Alexander Duyck)
- ixgbe: Minor refactor of RSC (Alexander Duyck)
- ixgbe: ethtool: stats user buffer overrun (John Fastabend)
- ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state (John
Fastabend)
- ixgbe: do not update real num queues when netdev is going away (Yi Zou)
- ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size
(Alexander Duyck)
- ixgbe: Fix case of Tx Hang in PF with 32 VFs (Greg Rose)
- ixgbe: fix vf lookup (Greg Rose)
- ixgbe: Fix typo in ixgbe_common.h (Masanari Iida)
- ixgbe: make ethtool strings table const (Stephen Hemminger)
- ixgbe: Add warning when no space left for more MAC filters (Joe Jin)
- ixgbe: update copyright to 2012 (Don Skidmore)
- ixgbe: Add module parameter to allow untested and unsafe SFP+ modules (Peter
P Waskiewicz Jr)
- ixgbe: Fix register defines to correctly handle complex expressions
(Alexander Duyck)
- ixgbe: add support for new 82599 device. (Don Skidmore)
- ixgbe: add support for new 82599 device id (Emil Tantilov)
- ixgbe: add write flush in ixgbe_clock_out_i2c_byte() (Emil Tantilov)
- ixgbe: fix typo's (Stephen Hemminger)
- ixgbe: fix incorrect PHY register reads (Emil Tantilov)
- ixgbe: Remove function prototype for non-existent function (Greg Rose)
- ixgbe: DCB: IEEE transitions may fail to reprogram hardware. (John Fastabend)
- ixgbe: DCBnl set_all, order of operations fix (Joe Jin)
- ixgbe: fix LED blink logic to check for link (Emil Tantilov)
- ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined (Rose, Gregory
V)
- ixgbe: DCB, return max for IEEE traffic classes (John Fastabend)
- ixgbe: fix reading of the buffer returned by the firmware (Emil Tantilov)
- ixgbe: Fix compiler warnings (Greg Rose)
- ixgbe: fix smatch splat due to missing NULL check (John Fastabend)
- ixgbe: fix disabling of Tx laser at probe (Emil Tantilov)
- ixgbe: Fix link issues caused by a reset while interface is down (Emil
Tantilov)
- ixgbe: change the eeprom version reported by ethtool (Emil Tantilov)
- ixgbe: allow eeprom writes via ethtool (Emil Tantilov)
- ixgbe: fix endianess when writing driver version to firmware (Emil Tantilov)
- ixgbe: fix skb truesize underestimation (Eric Dumazet)
- ixgbe: Correct check for change in FCoE priority (Mark Rustad)
- ixgbe: Add FCoE DDP allocation failure counters to ethtool stats. (Amir
Hanania)
- ixgbe: Add protection from VF invalid target DMA (Greg Rose)
- ixgbe: bump version number (Don Skidmore)
- ixgbe: X540 devices RX PFC frames pause traffic even if disabled (John
Fastabend)
- ixgbe: DCB X540 devices support max traffic class of 4 (John Fastabend)
- ixgbe: fixup hard dependencies on supporting 8 traffic classes (Joe Jin)
- ixgbe: Fix PFC mask generation (Mark Rustad)
- ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599 (Emil Tantilov)
- ixgbe: get pauseparam autoneg (Mika Lansirinne)
- ixgbe: do not disable flow control in ixgbe_check_mac_link (Emil Tantilov)
- ixgbe: send MFLCN to ethtool (Emil Tantilov)
- ixgbe: add support for new 82599 device (Emil Tantilov)
- ixgbe: fix driver version initialization in firmware (Jacob Keller)
- ixgbe: remove return code for functions that always return 0 (Emil Tantilov)
- ixgbe: clear the data field in ixgbe_read_i2c_byte_generic (Emil Tantilov)
- ixgbe: prevent link checks while resetting (Emil Tantilov)
- ixgbe: add ECC warning for legacy interrupts (Don Skidmore)
- ixgbe: cleanup ixgbe_setup_gpie() for X540 (Don Skidmore)
- ixgbe add thermal sensor support for x540 hardware (Jacob Keller)
- ixgbe: update {P}FC thresholds to account for X540 and loopback (John
Fastabend)
- ixgbe: disable LLI for FCoE (Vasu Dev)
- ixgbe: Cleanup q_vector interrupt throttle rate logic (Emil Tantilov)
- ixgbe: remove global reset to the MAC (Emil Tantilov)
- ixgbe: add WOL support for X540 (Emil Tantilov)
- ixgbe: avoid HW lockup when adapter is reset with Tx work pending (Emil
Tantilov)
- ixgbe: dcb, set priority to traffic class mappings (John Fastabend)
- ixgbe: cleanup X540 interrupt enablement (Don Skidmore)
- ixgbe: DCB, do not call set_state() from IEEE mode (Joe Jin)
- ixgbe: Reconfigure SR-IOV Init (Greg Rose)
- ixgbe: remove duplicate netif_tx_start_all_queues (Emil Tantilov)
- ixgbe: fix FCRTL/H register dump for X540 (Emil Tantilov)
- ixgbe: cleanup some register reads (Emil Tantilov)
- ixgbe: Make better use of memory allocations in one-buffer mode w/ RSC
(Alexander Duyck)
- ixgbe: drop adapter from ixgbe_fso call documentation (Alexander Duyck)
- ixgbe: Add SFP support for missed 82598 PHY (Alexander Duyck)
- ixgbe: Add missing code for enabling overheat sensor interrupt (Alexander
Duyck)
- ixgbe: make ixgbe_up and ixgbe_up_complete void functions (Alexander Duyck)
- v2 ixgbe: Update packet buffer reservation to correct fdir headroom size
(Alexander Duyck)
- ixgbe: remove redundant configuration of tx_sample_rate (Alexander Duyck)
- ixgbe: Correctly name and handle MSI-X other interrupt (Alexander Duyck)
- ixgbe: cleanup configuration of EITRSEL and VF reset path (Alexander Duyck)
- ixgbe: cleanup reset paths (Alexander Duyck)
- ixgbe: Update TXDCTL configuration to correctly handle WTHRESH (Alexander
Duyck)
- ixgbe: combine PCI_VDEVICE and board declaration to same line (Alexander
Duyck)
- ixgbe: Drop unnecessary adapter->hw dereference in loopback test setup
(Alexander Duyck)
- ixgbe: commonize ixgbe_map_rings_to_vectors to work for all interrupt types
(Alexander Duyck)
- ixgbe: Use ring->dev instead of adapter->pdev->dev when updating DCA
(Alexander Duyck)
- ixgbe: cleanup allocation and freeing of IRQ affinity hint (Alexander Duyck)
- v2 ixgbe: consolidate all MSI-X ring interrupts and poll routines into one
(Alexander Duyck)
- ixgbe: Change default Tx work limit size to 256 buffers (Alexander Duyck)
- ixgbe: clear RNBC only for 82598 (Emil Tantilov)
- ixgbe: add check for supported modes (Emil Tantilov)
- ixgbe: fix ixgbe_fc_autoneg_fiber bug (Don Skidmore)
- ixgbe: cleanup feature flags in ixgbe_probe (Don Skidmore)
- ixgbe: PFC not cleared on X540 devices (John Fastabend)
- ixgbe: consolidate, setup for multiple traffic classes (John Fastabend)
- ixgbe: remove unneeded fdir pb alloc case (John Fastabend)
- ixgbe: fixup remaining call sites for arbitrary TCs (John Fastabend)
- ixgbe: Always tag VLAN tagged packets (Alexander Duyck)
- ixgbe: Add support for setting CC bit when SR-IOV is enabled (Alexander
Duyck)
- ixgbe: convert rings from q_vector bit indexed array to linked list
(Alexander Duyck)
- ixgbe: Simplify transmit cleanup path (Alexander Duyck)
- ixgbe: Cleanup FCOE and VLAN handling in xmit_frame_ring (Alexander Duyck)
- ixgbe: replace reference to CONFIG_FCOE with IXGBE_FCOE (Alexander Duyck)
- ixgbe - DDP last user buffer - error to warn (Amir Hanania)
- ixgbe: remove unused fcoe.tc field and fcoe_setapp() (John Fastabend)
- ixgbe: complete FCoE initialization from setapp() routine (John Fastabend)
- ixgbe: DCB, remove unneeded ixgbe_dcb_txq_to_tc() routine (John Fastabend)
- ixgb: Remove unnecessary defines, use pr_debug (Joe Perches)
- ixgb: finish conversion to ndo_fix_features (Michał Mirosław)
- ixgb: eliminate checkstack warnings (Jesse Brandeburg)
- ixgb: convert to ndo_fix_features (Michał Mirosław)
- igbvf: fix the bug when initializing the igbvf (Samuel Liao)
- rename dev_hw_addr_random and remove redundant second (Joe Jin)
- ixgbevf: Convert printks to pr_<level> (Jeff Kirsher)
- igbvf: Use ETH_ALEN (Joe Perches)
- igbvf: reset netdevice addr_assign_type if changed (Danny Kukawka)
- igbvf: refactor Interrupt Throttle Rate code (Mitch A Williams)
- igbvf: change copyright date (Mitch A Williams)
- igbvf: Remove unnecessary irq disable/enable (Joe Jin)
- igbvf: remove unneeded cast (Stephen Hemminger)
- igbvf: Convert printks to pr_<level> (Jeff Kirsher)
- igbvf: Bump version number (Williams, Mitch A)
- igbvf: Update module identification strings (Williams, Mitch A)
- igbvf: fix truesize underestimation (Eric Dumazet)
- igbvf: Fix trunk vlan (Greg Rose)
- igbvf: convert to ndo_fix_features (Michał Mirosław)
- igb: fix rtnl race in PM resume path (Benjamin Poirier)
- igb: fix warning about unused function (Emil Tantilov)
- igb: fix vf lookup (Greg Rose)
- igb: Update Copyright on all Intel copyrighted files. (Carolyn Wyborny)
- igb: make local functions static (Stephen Hemminger)
- igb: reset PHY after recovering from PHY power down (Koki Sanagi)
- igb: add basic runtime PM support (Yan, Zheng)
- igb: Add flow control advertising to ethtool setting. (Carolyn Wyborny)
- igb: Update DMA Coalescing threshold calculation. (Matthew Vick)
- igb: Convert bare printk to pr_notice (Joe Perches)
- igb: Convert printks to pr_<level> (Jeff Kirsher)
- igb: Fix for I347AT4 PHY cable length unit detection (Kantecki, Tomasz)
- igb: VFTA Table Fix for i350 devices (Carolyn Wyborny)
- igb: Move DMA Coalescing init code to separate function. (Carolyn Wyborny)
- igb: Fix for Alt MAC Address feature on 82580 and later devices (Carolyn
Wyborny)
- igb: fix a compile warning (RongQing Li)
- igb: Check if subordinate VFs are assigned to virtual machines (Greg Rose)
- pci: Add flag indicating device has been assigned by KVM (Greg Rose)
- igb: enable l4 timestamping for v2 event packets (Jacob Keller)
- igb: fix skb truesize underestimation (Eric Dumazet)
- igb: Version bump. (Carolyn Wyborny)
- igb: Loopback functionality supports for i350 devices (Akeem G. Abodunrin)
- igb: fix static function warnings reported by sparse (Emil Tantilov)
- igb: Add workaround for byte swapped VLAN on i350 local traffic (Alexander
Duyck)
- igb: Drop unnecessary write of E1000_IMS from igb_msix_other (Alexander
Duyck)
- igb: Fix features that are currently 82580 only and should also be i350
(Alexander Duyck)
- igb: Make certain one vector is always assigned in igb_request_irq (Alexander
Duyck)
- igb: avoid unnecessarily creating a local copy of the q_vector (Alexander
Duyck)
- igb: add support for NETIF_F_RXHASH (Alexander Duyck)
- igb: move TX hang check flag into ring->flags (Alexander Duyck)
- igb: fix recent VLAN changes that would leave VLANs disabled after reset
(Alexander Duyck)
- igb: leave staterr in place and instead us a helper function to check bits
(Alexander Duyck)
- igb: retire the RX_CSUM flag and use the netdev flag instead (Alexander
Duyck)
- igb: cleanup IVAR configuration (Alexander Duyck)
- igb: Move ITR related data into work container within the q_vector (Alexander
Duyck)
- igb: Consolidate all of the ring feature flags into a single value (Alexander
Duyck)
- igb: avoid unnecessary conversions from u16 to int (Alexander Duyck)
- igb: Use node specific allocations for the q_vectors and rings (Alexander
Duyck)
- igb: push data into first igb_tx_buffer sooner to reduce stack usage
(Alexander Duyck)
- igb: consolidate creation of Tx buffer info and data descriptor (Alexander
Duyck)
- igb: Combine all flag info fields into a single tx_flags structure (Alexander
Duyck)
- igb: Cleanup protocol handling in transmit path (Alexander Duyck)
- igb: Create separate functions for generating cmd_type and olinfo (Alexander
Duyck)
- igb: Make first and tx_buffer_info->next_to_watch into pointers (Alexander
Duyck)
- igb: Consolidate creation of Tx context descriptors into a single function
(Alexander Duyck)
- intel: convert to SKB paged frag API. (Ian Campbell)
- ixgbe: Refactor transmit map and cleanup routines (Alexander Duyck)
- igb: split buffer_info into tx_buffer_info and rx_buffer_info (Alexander
Duyck)
- igb: Make Tx budget for NAPI user adjustable (Alexander Duyck)
- igb: Alternate MAC Address Updates for Func2&3 (Akeem G. Abodunrin)
- igb: Alternate MAC Address EEPROM Updates (Akeem G. Abodunrin)
- igb: Code to prevent overwriting SFP I2C (Akeem G. Abodunrin)
- igb: Remove multi_tx_table and simplify igb_xmit_frame (Alexander Duyck)
- igb: drop the "adv" off function names relating to descriptors (Joe Jin)
- igb: Replace E1000_XX_DESC_ADV with IGB_XX_DESC (Alexander Duyck)
- igb: Refactor clean_rx_irq to reduce overhead and improve performance
(Alexander Duyck)
- igb: update ring and adapter structure to improve performance (Alexander
Duyck)
- igb: streamline Rx buffer allocation and cleanup (Alexander Duyck)
- igb: drop support for single buffer mode (Alexander Duyck)
- igb: Update max_frame_size to account for an optional VLAN tag if present
(Alexander Duyck)
- igb: Update RXDCTL/TXDCTL configurations (Alexander Duyck)
- igb: remove duplicated #include (Huang Weiyi)
- igb: Fix for DH89xxCC near end loopback test (Robert Healy)
- igb: do vlan cleanup (Jiri Pirko)
- igb: Add support of SerDes Forced mode for certain hardware (Carolyn Wyborny)
- igb: Update copyright on all igb driver files. (Carolyn Wyborny)
- net: igb: Use is_multicast_ether_addr helper (Tobias Klauser)
- igb: remove unnecessary reads of PCI_CAP_ID_EXP (Jon Mason)
- igb: convert to ndo_fix_features (Michał Mirosław)
- igb: Change version to remove number after -k in kernel versions. (Carolyn
Wyborny)
- e1000e: Fix default interrupt throttle rate not set in NIC HW (Jeff Kirsher)
- e1000e: MSI interrupt test failed, using legacy interrupt (Prasanna S
Panchamukhi)
- e1000e: issues in Sx on 82577/8/9 (Joe Jin)
- e1000e: Guarantee descriptor writeback flush success. (Matthew Vick)
- e1000e: prevent oops when adapter is being closed and reset simultaneously
(Bruce Allan)
- e1000e: use msleep instead of mdelay (Joe Jin)
- e1000e: cleanup goto statements to exit points without common work (Bruce
Allan)
- e1000e: potentially incorrect return for e1000e_setup_fiber_serdes_link
(Bruce Allan)
- e1000e: potentially incorrect return for e1000_init_hw_ich8lan (Bruce Allan)
- e1000e: cleanup: minor whitespace addition (insert blank line separator)
(Bruce Allan)
- e1000e: cleanup: remove unnecessary variable initializations (Bruce Allan)
- e1000e: cleanup: remove unnecessary test and return (Bruce Allan)
- e1000e: cleanup: remove unnecessary variable ret_val (Bruce Allan)
- e1000e: cleanup: remove unreachable statement (Bruce Allan)
- e1000e: potentially incorrect return for e1000_set_d3_lplu_state_ich8lan
(Bruce Allan)
- e1000e: cleanup: always return 0 (Bruce Allan)
- e1000e: cleanup: remove unnecessary assignments just before returning (Bruce
Allan)
- e1000e: potential incorrect return for e1000_setup_copper_link_80003es2lan
(Bruce Allan)
- e1000e: potentially incorrect return for e1000_cfg_kmrn_10_100_80003es2lan
(Bruce Allan)
- e1000e: cleanup: rename goto labels to be more meaningful (Bruce Allan)
- e1000e: cleanup: use goto for common work needed by multiple exit points
(Bruce Allan)
- e1000e: replace '1' with 'true' for boolean get_link_status (Bruce Allan)
- e1000e: pass pointer to hw struct for e1000_init_mac_params_XXX() (Bruce
Allan)
- e1000e: use true/false for bool autoneg_false (Bruce Allan)
- e1000e: remove unnecessary parentheses (Bruce Allan)
- e1000e: remove unnecessary returns from void functions (Bruce Allan)
- e1000e: remove test that is always false (Bruce Allan)
- e1000e: WoL fails on device ID 0x1501 (Joe Jin)
- e1000e: WoL can fail on 82578DM (Bruce Allan)
- e1000e: remove redundant reverse dependency on CRC32 (Bruce Allan)
- e1000e: minor whitespace and indentation cleanup (Bruce Allan)
- e1000e: fix sparse warnings with -D__CHECK_ENDIAN__ (Bruce Allan)
- e1000e: fix checkpatch warning from MINMAX test (Bruce Allan)
- e1000e: cleanup - use braces in both branches of a conditional statement
(Bruce Allan)
- e1000e: cleanup e1000_set_phys_id (Bruce Allan)
- e1000e: cleanup e1000_init_mac_params_82571() (Bruce Allan)
- e1000e: cleanup e1000_init_mac_params_80003es2lan() (Bruce Allan)
- e1000e: rename es2lan.c to 80003es2lan.c (Joe Jin)
- e1000e: cleanup - check return values consistently (Bruce Allan)
- e1000e: add missing initializers reported when compiling with W=1 (Bruce
Allan)
- e1000e: update copyright year (Bruce Allan)
- e1000e: split lib.c into three more-appropriate files (Bruce Allan)
- e1000e: call er16flash() instead of __er16flash() (Bruce Allan)
- e1000e: increase version number (Joe Jin)
- e1000e: convert final strncpy() to strlcpy() (Bruce Allan)
- e1000e: concatenate long debug strings which span multiple lines (Bruce
Allan)
- e1000e: conditionally restart autoneg on 82577/8/9 when setting LPLU state
(Bruce Allan)
- e1000e: increase Rx PBA to prevent dropping received packets on 82566/82567
(Bruce Allan)
- e1000e: ICHx/PCHx LOMs should use LPLU setting in NVM when going to Sx (Joe
Jin)
- e1000e: update workaround for 82579 intermittently disabled during S0->Sx
(Bruce Allan)
- e1000e: disable Early Receive DMA on ICH LOMs (Bruce Allan)
- e1000e: Need to include vmalloc.h (David S. Miller)
- e1000e: 82574/82583 Tx hang workaround (Bruce Allan)
- e1000e: use hardware default values for Transmit Control register (Bruce
Allan)
- e1000e: use default settings for Tx Inter Packet Gap timer (Bruce Allan)
- e1000e: 82579: workaround for link drop issue (Bruce Allan)
- e1000e: always set transmit descriptor control registers the same (Bruce
Allan)
- e1000e: re-factor ethtool get/set ring parameter (Bruce Allan)
- e1000e: pass pointer to ring struct instead of adapter struct (Joe Jin)
- e1000e: add Receive Packet Steering (RPS) support (Joe Jin)
- e1000e: convert to netdev features/hw_features API (Joe Jin)
- e1000e: cleanup Rx checksum offload code (Bruce Allan)
- e1000e: convert head, tail and itr_register offsets to __iomem pointers
(Bruce Allan)
- e1000e: re-enable alternate MAC address for all devices which support it
(Bruce Allan)
- e1000e: default IntMode based on kernel config & available hardware support
(Bruce Allan)
- e1000e: convert to real ndo_set_rx_mode (Joe Jin)
- net: introduce IFF_UNICAST_FLT private flag (Joe Jin)
- e1000e: remove use of ndo_set_multicast_list in drivers (Joe Jin)
- e1000e: Convert printks to pr_<level> (Jeff Kirsher)
- e1000e: demote a debugging WARN to a debug log message (Bruce Allan)
- e1000e: fix skb truesize underestimation (Eric Dumazet)
- e1000e: locking bug introduced by commit 67fd4fcb (Bruce Allan)
- e1000e: bad short packets received when jumbos enabled on 82579 (Bruce Allan)
- e1000e: convert driver to use extended descriptors (Joe Jin)
- drivers/net: Add module.h to drivers who were implicitly using it (Joe Jin)
- e1000e: hitting BUG_ON() from napi_enable (Bruce Allan)
- e1000: Silence sparse warnings by correcting type (Andrei Emeltchenko)
- v2 e1000: Neaten e1000_dump function (Tushar Dave)
- e1000: Neaten e1000_config_dsp_after_link_change (Joe Perches)
- e1000: fix vlan processing regression (Joe Jin)
- e1000: Remove unnecessary k.alloc/v.alloc OOM messages (Joe Jin)
- e1000: add dropped DMA receive enable back in for WoL (Dean Nelson)
- e1000: Adding e1000_dump function (Tushar Dave)
- e1000: don't enable dma receives until after dma address has been setup (Dean
Nelson)
- e1000: save skb counts in TX to avoid cache misses (Dean Nelson)
- e1000: cleanup CE4100 MDIO registers access (Florian Fainelli)
- e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove (Florian Fainelli)
- e1000: fix lockdep splat in shutdown handler (Jesse Brandeburg)
- e1000e/ixgb: fix assignment of 0/1 to bool variables. (Joe Jin)
- intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALEN (Joe Perches)
- e1000: fix skb truesize underestimation (Eric Dumazet)
- e1000: convert to private mutex from rtnl (Jesse Brandeburg)
- e1000: convert mdelay to msleep (Jesse Brandeburg)
- e1000: convert hardware management from timers to threads (Jesse Brandeburg)
- e100: Remove alloc_etherdev error messages (Joe Jin)
- net: Remove Intel NICs unnecessary driver assignments of ethtool_ringparam
fields to zero (Joe Jin)
- e100: Show short v/s long rx length errors in ethtool stats. (Ben Greear)
- e100: Fix rx-over-length statistics. (Ben Greear)
- e100: make sure vlan support isn't advertised on old adapters (Jesse
Brandeburg)
- 8139cp: properly config rx mode after resuming (Jason Wang)
- bnx2x: add bnx2x firmware 7.2.16 (Joe Jin)
- bnx2fc: Remove bh disable in softirq context (Neil Horman)
- bnx2fc: HSI dependent changes for 7.2.xx FW (Bhanu Prakash Gollapudi)
- bnx2fc: Bumped version to 1.0.10 (Bhanu Prakash Gollapudi)
- bnx2fc: NPIV ports go offline when interface is brought down & up (Bhanu
Prakash Gollapudi)
- bnx2fc: Handle LOGO flooding from the target (Bhanu Prakash Gollapudi)
- bnx2fc: fix panic in bnx2fc_post_io_req (Bhanu Prakash Gollapudi)
- bnx2fc: Bumped version to 1.0.9 (Bhanu Prakash Gollapudi)
- bnx2fc: Handle SRR LS_ACC drop scenario (Bhanu Prakash Gollapudi)
- bnx2fc: Handle ABTS timeout during ulp timeout (Bhanu Prakash Gollapudi)
- bnx2fc: Bumped version to 1.0.8 (Bhanu Prakash Gollapudi)
- bnx2fc: Return error statistics of remote peer (Bhanu Prakash Gollapudi)
- bnx2fc: call ctlr_link_up only when the interface is enabled (Bhanu Prakash
Gollapudi)
- bnx2fc: Bumped version to 1.0.7 (Bhanu Prakash Gollapudi)
- bnx2fc: Handle bnx2fc_map_sg failure (Bhanu Prakash Gollapudi)
- bnx2fc: Replace scsi_dma_map() with dma_map_sg(). (Bhanu Prakash Gollapudi)
- bnx2fc: Bumped version to 1.0.6 (Bhanu Prakash Gollapudi)
- bnx2fc: Fix FW assert during RSCN stress tests (Bhanu Prakash Gollapudi)
- bnx2fc: Fix panic caused because of incorrect errror handling in create().
(Bhanu Prakash Gollapudi)
- bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks (Bhanu Prakash
Gollapudi)
- bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler (Nithin Nayak Sujir)
- bnx2fc: No abort issued for REC when it times out (Bhanu Prakash Gollapudi)
- bnx2fc: Send solicitation only after vlan discovery is complete (Bhanu
Prakash Gollapudi)
- bnx2fc: Reset max receive frame size during link up (Bhanu Prakash Gollapudi)
- bnx2fc: Need not schedule destroy_work from __bnx2fc_destroy (Bhanu Prakash
Gollapudi)
- bnx2fc: Bump version to 1.0.5 (Bhanu Prakash Gollapudi)
- bnx2fc: Prevent creating of NPIV port with duplicate WWN (Bhanu Prakash
Gollapudi)
- bnx2fc: Obtain WWNN/WWPN from the shared memory (Bhanu Prakash Gollapudi)
- [SCSI] fcoe,libfcoe: Move common code for fcoe_get_lesb to fcoe_transport
(Bhanu Prakash Gollapudi)
- [SCSI] fcoe: Move common functions to fcoe_transport library (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Drop incoming ABTS (Bhanu Prakash Gollapudi)
- [SCSI] bnx2fc: code cleanup in bnx2fc_offload_session (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Fix NULL pointer deref during arm_cq. (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: IO errors when receiving unsolicited LOGO (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Do not reuse the fcoe connection id immediately (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Clear DESTROY_CMPL flag after firmware destroy (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Handle NETDEV_UNREGISTER for vlan devices (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Reorganize cleanup code between interface_cleanup and
if_destory (Bhanu Prakash Gollapudi)
- [SCSI] bnx2fc: Change function names of
bnx2fc_netdev_setup/bnx2fc_netdev_cleanup (Bhanu Prakash Gollapudi)
- [SCSI] bnx2fc: Do not attempt destroying NPIV port twice (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Remove erroneous kref_get on IO request (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Enable bsg_request support for bnx2fc (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Bug fixes in percpu_thread_create/destroy (Bhanu Prakash
Gollapudi)
- [SCSI] bnx2fc: Reset the max receive frame size (Bhanu Prakash Gollapudi)
- [SCSI] bnx2i: Fixed the override of the error_mask module param (Eddie Wai)
- [SCSI] bnx2i: use kthread_create_on_node() (Eric Dumazet)
- [SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request
deref (Eddie Wai)
- [SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission (Eddie Wai)
- [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
(Eddie Wai)
- cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig. (David S. Miller)
- bnx2x: Fix 578xx link LED (Yaniv Rosner)
- bnx2x: Enable FEC for 57810-KR (Yaniv Rosner)
- bnx2x: disable dcb on 578xx since not supported yet (Dmitry Kravkov)
- bnx2x: decrease print level to debug (Dmitry Kravkov)
- bnx2x: fix BRB thresholds for dropless_fc mode (Dmitry Kravkov)
- bnx2x: fix cl_id allocation for non-eth clients for NPAR mode (Dmitry
Kravkov)
- bnx2x: Fix for a host coalescing bug which impared latency. (Ariel Elior)
- bnx2x: fix select_queue when FCoE is disabled (Vladislav Zolotarov)
- bnx2x: fix WOL by enablement PME in config space (Dmitry Kravkov)
- bnx2x: Fix XMAC loopback test (Yaniv Rosner)
- bnx2x: init FCOE FP only once (Vladislav Zolotarov)
- bnx2x: Remove fiber remote fault detection (Yaniv Rosner)
- cnic: update for FW 7.2.xx (Michael Chan)
- bnx2x: correction to firmware interface (Yuval Mintz)
- bnx2x: fix vector traveling while looking for an empty entry (Dmitry Kravkov)
- bnx2x: mark functions as loaded on shared memory (Yuval Mintz)
- bnx2x: fix memory leak in bnx2x_init_firmware() (Michal Schmidt)
- bnx2x: fix a crash on corrupt firmware file (Michal Schmidt)
- bnx2x: make bnx2x_close() static again (Michal Schmidt)
- bnx2x: removed code re-checking memory base after device open (Mintz Yuval)
- bnx2x: allow BCM84833 phy to advertise 100Base-T speeds (Mintz Yuval)
- bnx2x: notify cnic of address of info-to-the-mcp (Mintz Yuval)
- bnx2x: allocate smaller Rx rings for 1G functions (Mintz Yuval)
- bnx2x: allocate memory dynamically in ethtool self-test. (Merav Sicron)
- bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertised
(Yaniv Rosner)
- bnx2x: added autoneg-restart after link advertisement changes (Yaniv Rosner)
- bnx2x: ethtool publishes link partners speed and FC (Mintz Yuval)
- bnx2x: half duplex support added for several boards (Yaniv Rosner)
- bnx2x: remove the 'poll' module option (Michal Schmidt)
- bnx2x: fix bnx2x_storm_stats_update() on big endian (Eric Dumazet)
- bnx2x: Fix mem leak in bnx2x_tpa_stop() if build_skb() fails. (Jesper Juhl)
- bnx2x: Update version to 1.72.0 and copyrights (Ariel Elior)
- bnx2x: Recoverable and unrecoverable error statistics (Ariel Elior)
- bnx2x: Recovery flow bug fixes (Ariel Elior)
- bnx2x: init fw_seq after undi_unload is done (Dmitry Kravkov)
- bnx2x: Track active PFs with bitmap (Ariel Elior)
- bnx2x: Lock PF-common resources (Ariel Elior)
- bnx2x: don't reset device while reading its configuration. (Dmitry Kravkov)
- bnx2x: Loaded Firmware Version Validation (Ariel Elior)
- bnx2x: Function Level Reset Final Cleanup (Ariel Elior)
- bnx2x: Obtain Bus Device Function from register (Ariel Elior)
- bnx2x: Removing indirect register access (Ariel Elior)
- bnx2x: Support Queue Per Cos in 5771xx devices (Ariel Elior)
- bnx2x: Remove 100Mb force speed for BCM84833 (Yaniv Rosner)
- bnx2x: Fix ethtool advertisement (Yaniv Rosner)
- bnx2x: unlock before returning an error (Dan Carpenter)
- bnx2x: fix compilation error with SOE in fw_dump (Yuval Mintz)
- bnx2x: handle CHIP_REVISION during init_one (Ariel Elior)
- bnx2x: don't access removed registers on 57712 and above (Dmitry Kravkov)
- bnx2x: properly clean indirect addresses (Dmitry Kravkov)
- bnx2x: allow user to change ring size in ISCSI SD mode (Dmitry Kravkov)
- bnx2x: fix Big-Endianess in ethtool -t (Dmitry Kravkov)
- bnx2x: fixed ethtool statistics for MF modes (Yuval Mintz)
- bnx2x: credit-leakage fixup on vlan_mac_del_all (Yuval Mintz)
- bnx2x: Disable AN KR work-around for BCM57810 (Yaniv Rosner)
- bnx2x: Remove AutoGrEEEn for BCM84833 (Yaniv Rosner)
- bnx2x: Fix PFC setting on BCM57840 (Yaniv Rosner)
- bnx2x: Fix Super-Isolate mode for BCM84833 (Yaniv Rosner)
- bnx2x: handle vpd data longer than 128 bytes (Barak Witkowski)
- bnx2x: properly update skb when mtu > 1500 (Dmitry Kravkov)
- bnx2x: properly initialize L5 features (Joe Jin)
- bnx2x: fix typo in fcoe stats collection (Barak Witkowski)
- bnx2x: Fix compile errors if CONFIG_CNIC is not set (Michael Chan)
- bnx2x, cnic: support DRV_INFO upon FW request (Barak Witkowski)
- bnx2x: support classification config query (Ariel Elior)
- bnx2x: add fcoe statistics (Barak Witkowski)
- bnx2x: add PFC statistics (Barak Witkowski)
- bnx2x: Use kcalloc instead of kzalloc to allocate array (Thomas Meyer)
- bnx2x: handle iSCSI SD mode (Dmitry Kravkov)
- bnx2x: fix rx ring size report (Vladislav Zolotarov)
- bnx2x: Change value comparison order (Yaniv Rosner)
- bnx2x: Cosmetic changes (Yaniv Rosner)
- bnx2x: Fix self test of BCM57800 (Yaniv Rosner)
- bnx2x: Add known PHY type check (Yaniv Rosner)
- bnx2x: Change Warpcore MDIO work around mode (Yaniv Rosner)
- bnx2x: Fix BCM84833 link and LED behavior (Yaniv Rosner)
- bnx2x: Warpcore HW reset following fan failure (Yaniv Rosner)
- bnx2x: ETS changes (Yaniv Rosner)
- bnx2x: Fix ETS bandwidth (Yaniv Rosner)
- bnx2x: PFC changes (Yaniv Rosner)
- bnx2x: Fix 5461x LED (Yaniv Rosner)
- bnx2x: cache-in compressed fw image (Dmitry Kravkov)
- bnx2x: add endline at end of message (Dmitry Kravkov)
- bnx2x: uses build_skb() in receive path (Eric Dumazet)
- net: introduce build_skb() (Eric Dumazet)
- net: more accurate skb truesize (Eric Dumazet)
- bnx2x: update driver version to 1.70.35-0 (Dmitry Kravkov)
- bnx2x: Remove on-stack napi struct variable (Ariel Elior)
- bnx2x: prevent race in statistics flow (Dmitry Kravkov)
- bnx2x: add fan failure event handling (Ariel Elior)
- bnx2x: remove unused #define (Dmitry Kravkov)
- bnx2x: simplify definition of RX_SGE_MASK_LEN and use it. (Dmitry Kravkov)
- bnx2x: propagate DCBX negotiation (Dmitry Kravkov)
- bnx2x: fix MF for 4-port devices (Dmitry Kravkov)
- bnx2x: DCBX: use #define instead of magic (Dmitry Kravkov)
- bnx2x: separate FCoE and iSCSI license initialization. (Joe Jin)
- bnx2x: remove unused variable (Dmitry Kravkov)
- bnx2x: use rx_queue index for skb_record_rx_queue() (Dmitry Kravkov)
- bnx2x: allow FCoE and DCB for 578xx (Joe Jin)
- bnx2x: update driver version to 1.70.30-0 (Dmitry Kravkov)
- bnx2x: use FW 7.0.29.0 (Dmitry Kravkov)
- bnx2x: add bnx2x FW 7.0.29 (Joe Jin)
- bnx2x: Enable changing speed when port type is PORT_DA (Yaniv Rosner)
- bnx2x: Fix 54618se LED behavior (Yaniv Rosner)
- bnx2x: Fix RX/TX problem caused by the MAC layer (Yaniv Rosner)
- bnx2x: Add link retry to 578xx-KR (Yaniv Rosner)
- bnx2x: Fix LED blink rate for 578xx (Yaniv Rosner)
- bnx2x: fix skb truesize underestimation (Eric Dumazet)
- bnx2x: remove some dead code (Dan Carpenter)
- bnx2x: Fix build error (Dmitry Kravkov)
- bnx2x: Add new PHY BCM54616 (Yaniv Rosner)
- bnx2x: resurrect RX hashing (Joe Jin)
- bnx2x: convert to SKB paged frag API. (Ian Campbell)
- net: add APIs for manipulating skb page fragments. (Ian Campbell)
- bnx2x: Use pr_fmt and message logging cleanups (Joe Jin)
- bnx2x: Coalesce pr_cont uses and fix DP typos (Joe Perches)
- bnx2x: Remove local defines for %pM and mac address (Joe Perches)
- bnx2x: Clear MDIO access warning during first driver load (Yaniv Rosner)
- bnx2x: Fix BCM578xx MAC test (Yaniv Rosner)
- bnx2x: Fix BCM54618se invalid link indication (Yaniv Rosner)
- bnx2x: Fix BCM84833 link (Yaniv Rosner)
- bnx2x: Fix link issue with DAC over 578xx (Yaniv Rosner)
- bnx2x: Fix LED behavior (Yaniv Rosner)
- bnx2x: Fix BCM578xx-B0 MDIO access (Yaniv Rosner)
- bnx2x: Fix remote fault handling (Yaniv Rosner)
- bnx2x: Fix chip hanging due to TX pipe stall. (Yaniv Rosner)
- bnx2x: Fix missing pause on for 578xx (Yaniv Rosner)
- bnx2x: Prevent restarting Tx during bnx2x_nic_unload (Vladislav Zolotarov)
- bnx2x: use pci_pcie_cap() (Vladislav Zolotarov)
- bnx2x: fix bnx2x_stop_on_error flow in bnx2x_sp_rtnl_task (Vladislav
Zolotarov)
- bnx2x: enable internal target-read for 57712 and up only (Shmulik Ravid)
- bnx2x: count statistic ramrods on EQ to prevent MC assert (Vladislav
Zolotarov)
- bnx2x: fix loopback for non 10G link (Yaniv Rosner)
- bnx2x: dcb - send all unmapped priorities to same COS as L2 (Dmitry Kravkov)
- bnx2x: Broken self-test in SF mode on 578xx (Vladislav Zolotarov)
- bnx2x: Parity errors recovery for 578xx (Vladislav Zolotarov)
- bnx2x: Read FIP mac from SHMEM in single function mode (Vladislav Zolotarov)
- bnx2x: Fixed ethtool -d for 578xx (Vladislav Zolotarov)
- bnx2x: disable FCoE for 578xx devices since not yet supported (Dmitry
Kravkov)
- bnx2x: fix memory barriers (Vladislav Zolotarov)
- bnx2x: use BNX2X_Q_FLG_TPA_IPV6 for TPA queue configuration (Vladislav
Zolotarov)
- bnx2x: disable loacal BH when scheduling FCOE napi (Vladislav Zolotarov)
- bnx2x: fix MB index for 4-port devices (Dmitry Kravkov)
- bnx2x: DCB rework (Dmitry Kravkov)
- bnx2x: remove unnecessary dma_sync (Vladislav Zolotarov)
- bnx2x: stop tx before CNIC_STOP (Vladislav Zolotarov)
- bnx2x: add missing command in error handling flow (Dmitry Kravkov)
- bnx2x: use correct dma_sync function (Vladislav Zolotarov)
- bnx2x: Fix compilation when CNIC is not selected in config (Dmitry Kravkov)
- bnx2x: Multiple concurrent l2 traffic classes (Ariel Elior)
- bnx2x: Renaming the "reset_task" to "sp_rtnl_task" (Ariel Elior)
- bnx2x: Add dcbnl notification (Shmulik Ravid)
- dcbnl: Add CEE notification (Shmulik Ravid)
- dcbnl: Aggregated CEE GET operation (Shmulik Ravid)
- dcb: use nlmsg_free() instead of kfree() (Dan Carpenter)
- dcb: Add missing error check in dcb_ieee_set() (John Fastabend)
- dcb: fix return type on dcb_setapp() (John Fastabend)
- dcb: Add dcb_ieee_getapp_mask() for drivers to query APP settings (John
Fastabend)
- dcb: Add ieee_dcb_delapp() and dcb op to delete app entry (Joe Jin)
- dcb: Add ieee_dcb_setapp() to be used for IEEE 802.1Qaz APP data (John
Fastabend)
- net: dcbnl, add multicast group for DCB (John Fastabend)
- dcb: Add DCBX capabilities bitmask to the get_ieee response (John Fastabend)
- bnx2x: Fix warning message during 57712/8727 initialization (Yaniv Rosner)
- bnx2x: Add autogrEEEn support (Yaniv Rosner)
- bnx2x: Fix BCM84833 initialization (Yaniv Rosner)
- bnx2x: Fix false link indication at link partner when DAC is used (Yaniv
Rosner)
- bnx2x: Reset PHY due to fan failure for 578xx (Yaniv Rosner)
- bnx2x: Add CL37 BAM for Warpcore (Yaniv Rosner)
- bnx2x: Change BCM54616S to BCM54618SE (Yaniv Rosner)
- bnx2x: PFC fixes (Yaniv Rosner)
- bnx2x: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)
- cnic: Update VLAN ID during ISCSI_UEVENT_PATH_UPDATE (Eddie Wai)
- cnic: set error flag when iSCSI connection fails (Jeffrey Huang)
- cnic: Add FCoE parity error recovery (Michael Chan)
- cnic: Improve error recovery on bnx2x devices (Michael Chan)
- cnic: Add timeout for ramrod replies. (Michael Chan)
- cnic, bnx2fc: Increase maximum FCoE sessions. (Michael Chan)
- bnx2: Update driver to use new mips firmware. (Joe Jin)
- bnx2: Add missing memory barrier in bnx2_start_xmit() (Joe Jin)
- bnx2: Add support for ethtool --show-channels|--set-channels (Michael Chan)
- bnx2: fix skb truesize underestimation (Eric Dumazet)
- bnx2: don't request firmware when there's no userspace. (françois romieu)
- tg3: Avoid panic from reserved statblk field access (Matt Carlson)
- tg3: Use mii_advertise_flowctrl (Matt Carlson)
- tg3: Fix advertisement handling (Joe Jin)
- tg3: Add 57766 ASIC rev support (Matt Carlson)
- tg3: Make the TX BD DMA limit configurable (Matt Carlson)
- tg3: Track LP advertising (Matt Carlson)
- tg3: Integrate flowctrl check into AN adv check (Joe Jin)
- net: Change mii to ethtool advertisement function names (Matt Carlson)
- net: Add ethtool to mii advertisment conversion helpers (Joe Jin)
- tg3: fix ipv6 header length computation (Eric Dumazet)
- tg3: Break out RSS indir table init and assignment (Matt Carlson)
- tg3: Update version to 3.122 (Matt Carlson)
- tg3: Return flowctrl config through ethtool (Matt Carlson)
- tg3: Save stats across chip resets (Matt Carlson)
- tg3: Remove ethtool stats member from dev struct (Matt Carlson)
- tg3: Scale back code that modifies MRRS (Matt Carlson)
- tg3: Fix TSO CAP for 5704 devs w / ASF enabled (Matt Carlson)
- tg3: Add MDI-X reporting (Matt Carlson)
- tg3: Restrict large prod ring cap devices (Matt Carlson)
- tg3: Adjust BD replenish thresholds (Matt Carlson)
- tg3: Make 1000Base-X FC resolution look like 1000T (Matt Carlson)
- tg3: Update version to 3.121 (Matt Carlson)
- tg3: Eliminate timer race with reset_task (Matt Carlson)
- tg3: Schedule at most one tg3_reset_task run (Joe Jin)
- tg3: Obtain PCI function number from device (Matt Carlson)
- tg3: Fix irq alloc error cleanup path (Matt Carlson)
- tg3: Fix 4k skb error recovery path (Matt Carlson)
- tg3: Fix 4k tx bd segmentation code (Joe Jin)
- tg3: Fix APE mutex init and use (Matt Carlson)
- tg3: add tx_dropped counter (Joe Jin)
- tg3: fix tigon3_dma_hwbug_workaround() (Eric Dumazet)
- tg3: Remove unnecessary driver assignments of ethtool_ringparam fields to
zero (Joe Jin)
- tg3: Code movement (Matt Carlson)
- tg3: Eliminate tg3_halt_cpu() prototype (Matt Carlson)
- tg3: Eliminate tg3_write_sig_post_reset() prototype (Matt Carlson)
- tg3: Eliminate tg3_stop_fw() prototype (Matt Carlson)
- tg3: Remove tp->rx_offset term when unneeded (Matt Carlson)
- tg3: Fix missed MSI workaround (Matt Carlson)
- tg3: Workaround tagged status update bug (Matt Carlson)
- tg3: Add ability to turn off 1shot MSI (Matt Carlson)
- tg3: Check all adv bits when checking config (Matt Carlson)
- tg3: Update version to 3.120 (Matt Carlson)
- tg3: Add external loopback support to selftest (Matt Carlson)
- net: add external loopback test in ethtool self test (Amit Kumar Salecha)
- tg3: Restructure tg3_test_loopback (Matt Carlson)
- tg3: Pull phy int lpbk setup into separate func (Matt Carlson)
- tg3: Consilidate MAC loopback code (Matt Carlson)
- tg3: Remove dead code (Matt Carlson)
- tg3: Remove 5719 jumbo frames and TSO blocks (Matt Carlson)
- tg3: Break larger frags into 4k chunks for 5719 (Matt Carlson)
- tg3: Add tx BD budgeting code (Matt Carlson)
- tg3: Consolidate code that calls tg3_tx_set_bd() (Matt Carlson)
- tg3: Add partial fragment unmapping code (Matt Carlson)
- tg3: Generalize tg3_skb_error_unmap() (Matt Carlson)
- tg3: Remove short DMA check for 1st fragment (Matt Carlson)
- tg3: Simplify tx bd assignments (Matt Carlson)
- tg3: Reintroduce tg3_tx_ring_info (Matt Carlson)
- tg3: Fix NVRAM selftest failures for 5720 devs (Matt Carlson)
- tg3: Add more selfboot formats to NVRAM selftest (Matt Carlson)
- tg3: Return size from tg3_vpd_readblock() (Matt Carlson)
- tg3: Fix RSS indirection table distribution (Matt Carlson)
- tg3: Fix link down notify failure when EEE disabled (Matt Carlson)
- tg3: Fix link flap at 100Mbps with EEE enabled (Matt Carlson)
- tg3: Match power source to driver state (Matt Carlson)
- tg3: Add function status reporting (Matt Carlson)
- tg3: Create critical section around GPIO toggling (Matt Carlson)
- tg3: Determine PCI function number in one place (Matt Carlson)
- tg3: Check transitions to D0 power state (Matt Carlson)
- tg3: Create funcs for power source switching (Matt Carlson)
- tg3: Move power state transitions to init_one (Matt Carlson)
- tg3: Detect APE enabled devs earlier (Matt Carlson)
- tg3: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)
- tg3: Migrate phy preprocessor defs to system defs (Matt Carlson)
- tg3: Show flowctrl settings through get_settings() (Matt Carlson)
- tg3: Remove 4G_DMA_BNDRY_BUG flag (Matt Carlson)
- tg3: Remove 40BIT_DMA_LIMIT_BUG (Matt Carlson)
- [SCSI] hpsa: use find_first_zero_bit (Akinobu Mita)
- [SCSI] hpsa: combine hpsa_scsi_detect and hpsa_register_scsi (Stephen M.
Cameron)
- [SCSI] hpsa: removed unneeded structure member max_sg_entries and fix badly
named constant MAXSGENTRIES (Stephen M. Cameron)
- [SCSI] hpsa: fix per device memory leak on driver unload (Stephen M. Cameron)
- [SCSI] hpsa: do not sleep in atomic context in rmmod path. (Stephen M.
Cameron)
- [SCSI] hpsa: fix flush cache transfer length (Stephen M. Cameron)
- [SCSI] hpsa: set max sectors instead of taking the default (Stephen M.
Cameron)
- [SCSI] hpsa: detect controller lockup (Stephen M. Cameron)
- [SCSI] hpsa: remove unused busy_initializing and busy_scanning (Stephen M.
Cameron)
- cciss: fix flush cache transfer length (Stephen M. Cameron)
- cciss: auto engage SCSI mid layer at driver load time (Stephen M. Cameron)
- The Windows driver .inf disables ASPM on all cciss devices. Do the same.
(Matthew Garrett)
- cciss: add transport mode attribute to sys (Joe Handzik)
- cciss: Adds simple mode functionality (Joseph Handzik)
- [SCSI] hpsa: update device attributes when they change (Scott Teel)
- [SCSI] hpsa: improve naming on external target device functions (Scott Teel)
- [SCSI] hpsa: eliminate 8 external target limitation (Scott Teel)
- [SCSI] hpsa: fix potential array overflow in hpsa_update_scsi_devices (Scott
Teel)
- [SCSI] hpsa: rename HPSA_MAX_SCSI_DEVS_PER_HBA (Scott Teel)
- [SCSI] hpsa: refactor hpsa_figure_bus_target_lun (Stephen M. Cameron)
- [SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns (Stephen
M. Cameron)
- [SCSI] hpsa: Fix problem with MSA2xxx devices (Stephen M. Cameron)
- [scsi] hpsa: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
(Joe Jin)
-
Mon May 28 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.13.0.el5uek]
- drm/i915: fix integer overflow in i915_gem_do_execbuffer() (Xi Wang) [Orabug:
14107456] {CVE-2012-2384}
- drm/i915: fix integer overflow in i915_gem_execbuffer2() (Xi Wang) [Orabug:
14107445] {CVE-2012-2383}
-
Wed May 23 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.12.0.el5uek]
- Revert "x86, efi: Pass a minimal map to SetVirtualAddressMap()" (Maxim
Uvarov) [Orabug: 14076004]
- config: turn on CONFIG_HVC_XEN_FRONTEND (Maxim Uvarov) [Orabug: 14064174]
- xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. (Konrad
Rzeszutek Wilk)
- xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN (Konrad Rzeszutek Wilk)
- xen/hvc: Collapse error logic. (Konrad Rzeszutek Wilk)
-
Thu May 17 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.11.0.el5uek]
- [dm] do not forward ioctls from logical volumes to the underlying device (Joe
Jin) {CVE-2011-4127}
- [block] fail SCSI passthrough ioctls on partition devices (Joe Jin)
{CVE-2011-4127}
- [block] add and use scsi_blk_cmd_ioctl (Joe Jin) [Orabug: 14056755]
{CVE-2011-4127}
-
Wed May 16 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.10.0.el5uek]
- net: ipv4: relax AF_INET check in bind() (Eric Dumazet) [Orabug: 14054411]
- xen-netback: fix the number of skb slots calculation. (Adnan Misherfi)
- KVM: Ensure all vcpus are consistent with in-kernel irqchip settings (Avi
Kivity) {CVE-2012-1601}
- kabi update whitelist for OCFS (Maxim Uvarov) [Orabug: 14055758]
-
Thu May 10 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.9.0.el5uek]
- [SCSI] scsi_dh_rdac: Fix for unbalanced reference count (Moger, Babu)
[Orabug: 14059970]
- [SCSI] scsi_dh_rdac: Adding couple more vendor product ids (Moger, Babu)
[Orabug: 14059970]
- [SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support
partitions in storage (Chandra Seetharaman) [Orabug: 14059970]
- [SCSI] dh_rdac: Use WWID from C8 page instead of Subsystem id from C4 page to
identify storage (Chandra Seetharaman) [Orabug: 14059970]
- kernel config: turn on sxge and sxgevf drivers (Maxim Uvarov)
- sxge/sxgevf: add new driver (Maxim Uvarov) [Orabug: 13444150]
- be2iscsi: adding functionality to change network settings using iscsiadm
(root)
- be2iscsi: Adding bsg interface for be2iscsi (root)
- be2iscsi: Get Initiator Name for the iSCSI_Host (root)
- be2iscsi: Return async handle of unknown opcode to free list. (root)
- be2iscsi: Check ASYNC PDU Handle corresponds to HDR/DATA Handle (root)
- be2iscsi:Bump the driver Version (root)
- be2iscsi: Update in Copyright information (root)
- be2iscsi:Fix the function return values. (root)
- be2iscsi:Code cleanup, removing the goto statement (root)
- be2iscsi:Fix double free of MCCQ info memory. (root)
- be2iscsi:Set num_cpu = 1 if pci_enable_msix fails (root)
- be2iscsi:Fix typo function name mismatch (root)
- be2iscsi:Freeing of WRB and SGL Handle in cleanup task (root)
- be2iscsi: WRB Initialization and Failure code path change (root)
- be2iscsi: Fix in the Asynchronous Code Path (root)
- be2iscsi: cleanup a min_t() call (root)
- qlge: driver update to v1.0.0.30 (Maxim Uvarov) [Orabug: 14045380]
- netxen: driver update to v4.0.78 (Maxim Uvarov) [Orabug: 14045367]
- qlcnic: driver update to v5.0.28.1 (Maxim Uvarov) [Orabug: 14055720]
-
Wed May 09 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.8.0.el5uek]
- Revert "xen-blkfront: set pages are FOREIGN_FRAME when sharing them" (Konrad
Rzeszutek Wilk)
-
Wed May 09 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.7.0.el5uek]
- Revert "x86/ioapic: Add register level checks to detect bogus io-apic
entries" (Maxim Uvarov)
- qla2xxx: Updated the driver version to 8.04.00.03.39.0-k. (Giridhar Malavali)
- qla2xxx: Don't attach driver with function. (Giridhar Malavali)
- qla2xxx: Proper detection of firmware abort error code for ISP82xx. (Giridhar
Malavali)
- qla2xxx: Fix typo in bus-reset handler. (Andrew Vasquez)
- qla2xxx: Correct link-reset regressions introduced during 83xx porting.
(Andrew Vasquez)
- qla2xxx: Handle device mapping changes due to device logout. (Arun Easi)
- qla2xxx: Avoid invalid request queue dereference for bad response packets.
(Arun Easi)
- qla2xxx: Stop iteration after first failure in *_id functions. (Arun Easi)
- qla2xxx: Fix incorrect register access in qla2x00_start_iocbs(). (Arun Easi)
- qla2xxx: Fix to update proper command completion upon command retries.
(Andrew Vasquez)
- qla2xxx: Hard code the number of loop entries at 128. (Chad Dupuis)
- Revert "qla2xxx: Return N-port id to firmware on logout." (Giridhar Malavali)
- qla2xxx: Reference proper scsi_qla_host structure for processing non-scsi SRB
commands. (Giridhar Malavali)
- qla2xxx: Fix wrong decrement, null sp access. (Arun Easi)
- qla2xxx: Further consolidation of SRB related code changes. (Giridhar
Malavali)
- qla2xxx: Complete mailbox command timedout to avoid initialization failures
during next reset cycle. (Giridhar Malavali)
- qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of
targets. (Chad Dupuis)
- qla2xxx: Cache swl during fabric discovery. (Andrew Vasquez)
- qla2xxx: Remove EDC sysfs interface. (Joe Carnuccio)
- qla2xxx: Perform firmware dump procedure on mailbox command timeout. (Chad
Dupuis)
- qla2xxx: Change the log message when previous dump is available to retrieve
for ISP82xx. (Giridhar Malavali)
- qla2xxx: Log messages to use correct vha. (Arun Easi)
- qla2xxx: Add new message when a new loopid is assigned. (Chad Dupuis)
- qla2xxx: Fix ql_dbg arguments. (Arun Easi)
- qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci(). (Chad Dupuis)
- qla2xxx: Convert remaining printk's to ql_log format. (Chad Dupuis)
- qla2xxx: Print mailbox command opcode and return code when a command times
out. (Chad Dupuis)
- qla2xxx: Remove check for null fcport from host reset handler. (Michael
Christie)
- qla2xxx: Correct out of bounds read of ISP2200 mailbox registers. (Andrew
Vasquez)
- qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB
processing. (Andrew Vasquez)
- qla2xxx: Reduce mbx-command timeout for Login/Logout requests. (Andrew
Vasquez)
- qla2xxx: Clear options-flags while issuing stop-firmware mbx command. (Andrew
Vasquez)
- qla2xxx: Prep zero-length BSG data-transfer requests. (Andrew Vasquez)
- qla2xxx: Perform implicit logout during rport tear-down. (Andrew Vasquez)
- qla2xxx: Return N-port id to firmware on logout. (Joe Carnuccio)
- qla2xxx: Handle failure cases during fabric_login (Chad Dupuis)
- qla2xxx: Increase speed of flash access in ISP82xx adapters to improve
firmware load speed. (Chad Dupuis)
- qla2xxx: Handle change notifications based on switch scan results. (Arun
Easi)
- qla2xxx: Correct print format for edc ql_log() calls. (Joe Carnuccio)
- qla2xxx: Use consistent DL mask for ELS/CT passthru requests. (Andrew
Vasquez)
- qla2xxx: Consolidation of SRB processing. (Giridhar Malavali)
- qla2xxx: Use proper VPD/NVRAM regions with ISP8031 parts. (Andrew Vasquez)
- qla2xxx: Remove ql2xfwloadbin assignment to 0. (Chad Dupuis)
- qla2xxx: Call MPI reset for 81xx adapters only. (Andrew Vasquez)
- qla2xxx: Driver need to do HotReset instead of FundamentalReset for ISP83XX
(Andrew Vasquez)
- qla2xxx: Use default semantic for firmware load. (Saurav Kashyap)
- qla2xxx: Enhancements to support ISP83xx. (Giridhar Malavali)
- qla2xxx: Enhanced the dump routines to capture multiple request and response
queues. (Giridhar Malavali)
- qla2xxx: Update the driver version to 8.03.07.13.39.0-k. (Saurav Kashyap)
- qla2xxx: Fixed typos and misc issues. (Saurav Kashyap)
- qla2xxx: Fix byte swapping in IPE print statement. (Chad Dupuis)
- qla2xxx: Add an "is reset active" helper. (Andrew Vasquez)
- qla2xxx: Disable generating pause frames when firmware hang detected for
ISP82xx. (Giridhar Malavali)
- qla2xxx: Use a valid enode-mac if none defined. (Andrew Vasquez)
- qla2xxx: Remove resetting memory during device initialization for ISP82xx.
(Shyam Sundar)
- qla2xxx: Propagate up abort failures. (Arun Easi)
- qla2xxx: Add check for null fcport references in qla2xxx_queuecommand. (Chad
Dupuis)
- [mpt2sas] Bump driver vesion to 13.100.00.00 (Nagalakshmi Nandigama) [Orabug:
14040678]
- [mpt2sas] fix NULL pointer at ioc->pfacts (Nagalakshmi Nandigama) [Orabug:
14040678]
- [mpt2sas] A hard drive is going OFFLINE when there is a hard reset issued and
simultaneously another hard drive is hot unplugged (Nagalakshmi Nandigama)
[Orabug: 14040678]
- [mpt2sas] Set the phy identifier of the end device to to the phy number of
the parent device it is linked to (Nagalakshmi Nandigama) [Orabug: 14040678]
- [mpt2sas] While enabling phy, read the current port number from sas iounit
page 0 instead of page 1 (Nagalakshmi Nandigama) [Orabug: 14040678]
- [mpt2sas] Fix several endian issues found by runing sparse (Nagalakshmi
Nandigama) [Orabug: 14040678]
- [mpt2sas] Modify the source code as per the findings reported by the source
code analysis tool (Nagalakshmi Nandigama) [Orabug: 14040678]
- [mpt2sas] Improvement were made to better protect the sas_device,
raid_device, and expander_device lists (Nagalakshmi Nandigama)
- [mpt2sas] Perform Target Reset instead of HBA reset when a SATA_PASSTHROUGH
cmd timeout happens (Nagalakshmi Nandigama) [Orabug: 14040678]
- [mpt2sas] Added multisegment mode support for Linux BSG Driver (Nagalakshmi
Nandigama) [Orabug: 14040678]
- [mpt2sas] remove the global mutex (Nagalakshmi Nandigama) [Orabug: 14040678]
- [mpt2sas] MPI next revision header update (Nagalakshmi Nandigama) [Orabug:
14040678]
- Update lpfc version for 8.3.5.68.4p driver release (Vaios Papadimitriou)
- Fix bug with mailbox handling of REG_VFI and cable pull (CR 127762) (Vaios
Papadimitriou)
- Use PCI configure space read to flush PCI function reset register write to
avoid MMIO issues (CR 128101) (Vaios Papadimitriou)
- Fixed system panic when extents enabled with large number of small blocks (CR
128010) (Vaios Papadimitriou)
- Fixed the system panic during EEH recovery (CR 127062) (Vaios Papadimitriou)
- Fix resource leak when acc fails for received plogi (CR 127847) (Vaios
Papadimitriou)
- Fixed SLI4 driver module load and unload test in a loop crashes the system
(CR 126397) (Vaios Papadimitriou)
- Fixed missing CVL event causing round-robin FCF failover process to stop (CR
123367) (Vaios Papadimitriou)
- Fix deadlock during adapter offline request (CR 127217) (Vaios Papadimitriou)
- Fix same RPI registered multiple times after HBA reset (CR 127176) (Vaios
Papadimitriou)
- Fix driver handling of XRI Aborted CQE response (CR 127345) (Vaios
Papadimitriou)
- Fixed port and system failure in handling SLI4 FC port function reset (CR
126551) (Vaios Papadimitriou)
- Fix bug with driver not sending a LOGO with vport delete (CR 126625) (Vaios
Papadimitriou)
- Fix for SLI4 Port delivery for BLS ABORT ACC (CR 126289) (Vaios
Papadimitriou)
- Fix ndlp nodelist not empty wait timeout during driver unloading (CR 127052)
(Vaios Papadimitriou)
- Fix mailbox and vpi memory leaks (CR 126818) (Vaios Papadimitriou)
- Fix management communication issues by creating character device to take a
reference on the driver (CR 126082) (Vaios Papadimitriou)
- Fix for FDISC failures after firmware reset or link bounce (CR 126779) (Vaios
Papadimitriou)
- Fix for driver using duplicate RPIs after LPe16000 port reset (CR 126723)
(Vaios Papadimitriou)
- Fix discovery problem when in pt2pt (CR 126887) (Vaios Papadimitriou)
- Fixed failure in handling large CQ/EQ identifiers in an IOV environment (CR
126856) (Vaios Papadimitriou)
- Fix Locking code raising IRQ twice (Vaios Papadimitriou)
- Fix driver not returning when bad ndlp found in abts error event handling (CR
126209) (Vaios Papadimitriou)
- Fix bug with driver returning the wrong ndlp (CR 125743) (Vaios
Papadimitriou)
- Fix driver behavior when receiving an ADISC (CR 126654) (Vaios Papadimitriou)
- Fix bug with driver processing dump command type 4 using 16Gb FC Adapter (CR
126406) (Vaios Papadimitriou)
- Fix driver does not reset port when reset is needed during fw_dump (CR
125807) (Vaios Papadimitriou)
- Fix ELS FDISC failing with local reject / invalid RPI (CR 126350) (Vaios
Papadimitriou)
- Fix SLI4 FC port internal loopback (CR 126409) (Vaios Papadimitriou)
- Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (CR 126230) (Vaios
Papadimitriou)
- Fix bug with driver processing an els command using 16Gb FC Adapter (CR
126345) (Vaios Papadimitriou)
- Fix NMI seen due to CQE starvation (CR 126149) (Vaios Papadimitriou)
- Fixed SLI4 FC port obtained link type and number dependent on link connection
(CR 126264) (Vaios Papadimitriou)
- Fixed SLI4 FC port internal loopback without SFP and external link/loopback
plug (CR 125843) (Vaios Papadimitriou)
- Fix driver incorrectly building fcpCdb during scsi command prep (CR 126209)
(Vaios Papadimitriou)
- be2net: make be_vlan_add_vid() void (Maxim Uvarov)
- be2net: Record receive queue index in skb to aid RPS. (Somnath Kotur)
- be2net: Fix FW download for BE (Padmanabh Ratnakar)
- be2net: Fix traffic stall INTx mode (Padmanabh Ratnakar)
- be2net: fix ethtool get settings (Ajit Khaparde)
- be2net: fix programming of VLAN tags for VF (Ajit Khaparde)
- be2net: reset queue address after freeing (Sathya Perla)
- be2net: fix tx completion cleanup (Sathya Perla)
- be2net: refactor/cleanup vf configuration code (Maxim Uvarov)
- be2net: event queue re-design (Maxim Uvarov)
- be2net: update the driver version (Sarveshwar Bandi)
- be2net: Fix EEH error reset before a flash dump completes (Somnath Kotur)
- be2net: Ignore status of some ioctls during driver load (Ajit Khaparde)
- be2net: Fix wrong status getting returned for MCC commands (Padmanabh
Ratnakar)
- be2net: Fix Lancer statistics (Padmanabh Ratnakar)
- be2net: Fix ethtool self test for Lancer (Padmanabh Ratnakar)
- be2net: Fix FW download in Lancer (Padmanabh Ratnakar)
- be2net: Fix VLAN/multicast packet reception (Padmanabh Ratnakar)
- be2net: Fix number of vlan slots in flex mode (Ajit Khaparde)
- be2net: enable WOL by default if h/w supports it (Ajit Khaparde)
- be2net: Remove unused OFFSET_IN_PAGE() macro (Roland Dreier)
- be2net: enable RSS for ipv6 pkts (Sathya Perla)
- be2net: Use new implementation of get mac list command (Padmanabh Ratnakar)
- be2net: Fix link status query command (Padmanabh Ratnakar)
- ethtool: Null-terminate filename passed to ethtool_ops::flash_device (Ben
Hutchings)
- be2net: add descriptions for stat counters reported via ethtool (Sathya
Perla)
- be2net: allocate more headroom in incoming skbs (Eric Dumazet)
- netdev: make net_device_ops const (stephen hemminger)
- be2net: fix be_vlan_add/rem_vid (Ajit Khaparde)
- be2net: Fix INTx processing for Lancer (Padmanabh Ratnakar)
- be2net: Add support for Skyhawk cards (Ajit Khaparde)
- be2net: fix ethtool ringparam reporting (Sathya Perla)
- be2net: workaround to fix a bug in BE (Ajit Khaparde)
- be2net: update some counters to display via ethtool (Ajit Khaparde)
- net: make vlan ndo_vlan_rx_[add/kill]_vid return error value (Jiri Pirko)
- be2net: netpoll support (Ivan Vecera)
- xen/pci: don't use PCI BIOS service for configuration space accesses (David
Vrabel)
- xen/Kconfig: fix Kconfig layout (Andrew Morton)
- xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs (Konrad
Rzeszutek Wilk)
- xen/apic: Return the APIC ID (and version) for CPU 0. (Konrad Rzeszutek Wilk)
- drivers/video/xen-fbfront.c: add missing cleanup code (Julia Lawall)
- xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus
io-apic entries' (Konrad Rzeszutek Wilk)
- xen/acpi: Workaround broken BIOSes exporting non-existing C-states. (Konrad
Rzeszutek Wilk)
- xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded. (Konrad
Rzeszutek Wilk)
- drivers/video/xen-fbfront.c: add missing cleanup code (Julia Lawall)
- xen: correctly check for pending events when restoring irq flags (David
Vrabel)
- xen/smp: Fix crash when booting with ACPI hotplug CPUs. (Konrad Rzeszutek
Wilk)
- xen: use the pirq number to check the pirq_eoi_map (Stefano Stabellini)
-
Fri May 04 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.6.0.el5uek]
- [USB] cdc-acm: Increase number of devices to 64 (Joe Jin) [Orabug: 13693812]
- git-changelog: generate date entry (Maxim Uvarov)
- [scsi] hpsa: Remove some PCI IDs if for OL5. (Joe Jin)
- [block] cciss: fix incorrect PCI IDs and add two new ones (Joe Jin)
- [scsi] hpsa: add some older controllers to the kdump blacklist (Joe Jin)
- [block] cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
(Joe Jin)
- [block] cciss: add some older controllers to the kdump blacklist (Joe Jin)
-
Tue May 01 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.5.0.el5uek]
- be2net: query link status in be_open() (Sarveshwar Bandi) [Orabug: 13231]
-
Wed Apr 25 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.4.0.el5uek]
- Revert "xen/p2m: m2p_find_override: use list_for_each_entry_safe" (Konrad
Rzeszutek Wilk)
- xen/blkback: Fix warning error. (Konrad Rzeszutek Wilk)
- xen/blkback: Make optional features be really optional. (Konrad Rzeszutek
Wilk)
- xen-blkfront: module exit handling adjustments (Jan Beulich)
- xen-blkfront: properly name all devices (Jan Beulich)
- xen-blkfront: set pages are FOREIGN_FRAME when sharing them (Stefano
Stabellini)
- xen: EXPORT_SYMBOL set_phys_to_machine (Stefano Stabellini)
- xen-blkfront: make blkif_io_lock spinlock per-device (Steven Noonan)
- xen/blkfront: don't put bdev right after getting it (Andrew Jones)
- xen-blkfront: use bitmap_set() and bitmap_clear() (Akinobu Mita)
- xen/blkback: Enable blkback on HVM guests (Daniel De Graaf)
- xen/blkback: use grant-table.c hypercall wrappers (Daniel De Graaf)
- xen/p2m: m2p_find_override: use list_for_each_entry_safe (Stefano Stabellini)
- xen/gntdev: do not set VM_PFNMAP (Stefano Stabellini)
- xen/grant-table: add error-handling code on failure of gnttab_resume (Julia
Lawall)
- xen: only check xen_platform_pci_unplug if hvm (Igor Mammedov)
- xen: initialize platform-pci even if xen_emul_unplug=never (Igor Mammedov)
- xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps (Andrew Jones)
- xen: support pirq_eoi_map (Stefano Stabellini)
- xen/smp: Remove unnecessary call to smp_processor_id() (Srivatsa S. Bhat)
- xen/smp: Fix bringup bug in AP code. (Konrad Rzeszutek Wilk)
- xen/tmem: cleanup (Jan Beulich)
- xen: constify all instances of "struct attribute_group" (Jan Beulich)
- xen/xenbus: ignore console/0 (Stefano Stabellini)
- hvc_xen: introduce HVC_XEN_FRONTEND (Stefano Stabellini)
- hvc_xen: implement multiconsole support (Stefano Stabellini)
- hvc_xen: support PV on HVM consoles (Stefano Stabellini)
- xen: use this_cpu_xxx replace percpu_xxx funcs (Alex Shi)
- xenbus: don't free other end details too early (Jan Beulich)
- xen/resume: Fix compile warnings. (Konrad Rzeszutek Wilk)
- xen/xenbus: Add quirk to deal with misconfigured backends. (Konrad Rzeszutek
Wilk)
- xenbus: address compiler warnings (Jan Beulich)
- xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success (Jan
Beulich)
- xen/pciback: fix XEN_PCI_OP_enable_msix result (Jan Beulich)
- xen/pciback: Support pci_reset_function, aka FLR or D3 support. (Konrad
Rzeszutek Wilk)
- PCI: Introduce __pci_reset_function_locked to be used when holding
device_lock. (Konrad Rzeszutek Wilk)
- xen/acpi: Fix Kconfig dependency on CPU_FREQ (Konrad Rzeszutek Wilk)
- xen/acpi-processor: Do not depend on CPU frequency scaling drivers. (Konrad
Rzeszutek Wilk)
- xen/cpufreq: Disable the cpu frequency scaling drivers from loading. (Konrad
Rzeszutek Wilk)
- provide disable_cpufreq() function to disable the API. (Konrad Rzeszutek
Wilk)
- xen-netback: make ops structs const (stephen hemminger)
- netback: fix typo in comment (Wei Liu)
- netback: remove redundant assignment (Wei Liu)
- netback: Fix alert message. (Wei Liu)
- xen-netback: use correct index for invalidation in xen_netbk_tx_check_gop()
(Jan Beulich)
- net: xen-netback: correctly restart Tx after a VM restore/migrate (David
Vrabel)
- xen/netback: Add module alias for autoloading (Bastian Blank)
-
Wed Apr 25 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.3.0.el5uek]
- loop: loop_thread needs to set the PF_LESS_THROTTLE flag (Dave Kleikamp)
- iov_iter: missing assignment of ii_bvec_ops.ii_shorten (Dave Kleikamp)
-
Thu Apr 19 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.2.0.el5uek]
- regset: Return -EFAULT, not -EIO, on host-side memory fault (H. Peter Anvin)
{CVE-2012-1097}
- regset: Prevent null pointer reference on readonly regsets (H. Peter Anvin)
{CVE-2012-1097}
- cifs: fix dentry refcount leak when opening a FIFO on lookup (Jeff Layton)
{CVE-2012-1090}
- git-changelog: add brackets around cve (Maxim Uvarov)
- git-changelog: parse Oracle bug (Maxim Uvarov)
- NFSv4: Save the owner/group name string when doing open (Trond Myklebust)
[Oracle bug: 13842440 (from 13459986)]
- ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
(Jiaying Zhang)
- NFSv4: Return the delegation if the server returns NFS4ERR_OPENMODE (Trond
Myklebust)
- NFS: Properly handle the case where the delegation is revoked (Trond
Myklebust)
- nfsd: don't allow zero length strings in cache_parse() (Dan Carpenter)
- x86, tls: Off by one limit check (Dan Carpenter)
- x86, tsc: Skip refined tsc calibration on systems with reliable TSC (Alok
Kataria)
- lockd: fix arg parsing for grace_period and timeout. (NeilBrown)
- xfrm: Access the replay notify functions via the registered callbacks
(Steffen Klassert)
- Remove printk from rds_sendmsg (Dave Jones)
- net: fix napi_reuse_skb() skb reserve (Eric Dumazet)
- net: fix a potential rcu_read_lock() imbalance in rt6_fill_node() (Eric
Dumazet)
- Fix pppol2tp getsockname() (Benjamin LaHaise)
- slub: Do not hold slub_lock when calling sysfs_slab_add() (Christoph Lameter)
- xfs: Fix oops on IO error during xlog_recover_process_iunlinks() (Jan Kara)
- dm exception store: fix init error path (Andrei Warkentin)
- dm crypt: add missing error handling (Mikulas Patocka)
- dm crypt: fix mempool deadlock (Mikulas Patocka)
- vfs: fix d_ancestor() case in d_materialize_unique (Michel Lespinasse)
- udf: Fix deadlock in udf_release_file() (Jan Kara)
- ext4: check for zero length extent (Theodore Ts'o)
- ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc (Lukas Czerner)
- jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer (Eric Sandeen)
- e1000e: Avoid wrong check on TX hang (Jeff Kirsher)
- hwmon: (fam15h_power) Correct sign extension of running_avg_capture (Andreas
Herrmann)
- proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate().
(Pravin B Shelar)
- x86-32: Fix endless loop when processing signals for kernel tasks (Dmitry
Adamushko)
- usbnet: don't clear urb->dev in tx_complete (tom.leiming)
- SUNRPC: We must not use list_for_each_entry_safe() in rpc_wake_up() (Trond
Myklebust)
- cifs: fix issue mounting of DFS ROOT when redirecting from one domain
controller to the next (Jeff Layton)
- xfs: fix inode lookup race (Dave Chinner)
- firewire: ohci: fix too-early completion of IR multichannel buffers (Clemens
Ladisch)
- pata_legacy: correctly mask recovery field for HT6560B (Sergei Shtylyov)
- target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulation (Roland
Dreier)
- target: Don't set WBUS16 or SYNC bits in INQUIRY response (Roland Dreier)
- md/raid1,raid10: avoid deadlock during resync/recovery. (NeilBrown)
- md/bitmap: ensure to load bitmap when creating via sysfs. (NeilBrown)
- tcm_fc: Fix fc_exch memory leak in ft_send_resp_status (Nicholas Bellinger)
- hugetlbfs: avoid taking i_mutex from hugetlbfs_read() (Aneesh Kumar K.V)
- bootmem/sparsemem: remove limit constraint in alloc_bootmem_section (Nishanth
Aravamudan)
- mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode
(Andrea Arcangeli) {CVE-2012-1179}
- x86/ioapic: Add register level checks to detect bogus io-apic entries (Suresh
Siddha)
- rtc: Disable the alarm in the hardware (v2) (Rabin Vincent)
- genirq: Fix incorrect check for forced IRQ thread handler (Alexander Gordeev)
- genirq: Fix long-term regression in genirq irq_set_irq_type() handling
(Russell King)
- uevent: send events in correct order according to seqnum (v3) (Andrew Vagin)
- ntp: Fix integer overflow when setting time (Sasha Levin)
- math: Introduce div64_long (Sasha Levin)
- sysfs: Fix memory leak in sysfs_sd_setsecdata(). (Masami Ichikawa)
- futex: Cover all PI opcodes with cmpxchg enabled check (Thomas Gleixner)
- usb: musb: Reselect index reg in interrupt context (Supriya Karanth)
- USB: ftdi_sio: fix problem when the manufacture is a NULL string (Greg Kroah-
Hartman)
-
Thu Apr 12 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.15.el5uek]
- directio: account for extra page IOs for unaligned request (Dave Kleikamp)
[Orabug: 13916031]
-
Fri Apr 06 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.14.el5uek]
- update kabi (Maxim Uvarov)
- adjust kernel configs (Maxim Uvarov)
- usb: fix number of mapped SG DMA entries (Clemens Ladisch)
- svcrpc: destroy server sockets all at once (J. Bruce Fields)
- PCI: Rework ASPM disable code (Matthew Garrett)
- net: fix NULL dereferences in check_peer_redir() (Eric Dumazet)
- lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel (Wu Fengguang)
- writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue (Wu
Fengguang)
- net: Make qdisc_skb_cb upper size bound explicit. (David S. Miller)
- ipv4: Save nexthop address of LSRR/SSRR option to IPCB. (Maxim Uvarov)
- compat: use sys_sendfile64() implementation for sendfile syscall (Chris
Metcalf)
- ext4: implement ext4_file_write_iter (Dave Kleikamp)
-
Mon Apr 02 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.13.el5uek]
- fix git merge: vlan: allow nested vlan_do_receive() (Maxim Uvarov)
- SPEC: update and turn on kabi (Maxim Uvarov)
-
Mon Apr 02 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.12.el5uek]
- remove unused mutex hpidebuglock (Maxim Uvarov)
- add hxge-1.3.3 driver (Maxim Uvarov)
-
Fri Mar 30 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.11.el5uek]
- vlan: allow nested vlan_do_receive() (Maxim Uvarov)
- net: allow vlan traffic to be received under bond (John Fastabend)
- net: vlan: goto another_round instead of calling __netif_receive_skb (Jiri
Pirko)
-
Thu Mar 29 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.10.el5uek]
- ocfs2/cluster: Fix output in file elapsed_time_in_ms (Sunil Mushran)
-
Thu Mar 29 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.9.el5uek]
- Revert "loop: increase default number of loop devices to 512" (Maxim Uvarov)
- Revert "loop: set default number of loop devices to 200" (Maxim Uvarov)
- ocfs2/dlm: dlmlock_remote() needs to account for remastery (Sunil Mushran)
- ocfs2/dlm: Take inflight reference count for remotely mastered resources too
(Maxim Uvarov)
- ocfs2/dlm: Clean up refmap helpers (Maxim Uvarov)
- ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery()
(Sunil Mushran)
- ocfs2/dlm: Cleanup up dlm_finish_local_lockres_recovery() (Sunil Mushran)
- ocfs2/dlm: Trace insert/remove of resource to/from hash (Sunil Mushran)
- ocfs2/dlm: Clean up messages in o2dlm (Sunil Mushran)
- ocfs2/cluster: Cluster up now includes network connections too (Sunil
Mushran)
- ocfs2/cluster: Clean up messages in o2net (Sunil Mushran)
- ocfs2/cluster: Abort heartbeat start on hard-ro devices (Sunil Mushran)
-
Tue Mar 27 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.8.el5uek]
- loop: set default number of loop devices to 200 (Maxim Uvarov)
- SPEC OL5: fix xen support (Maxim Uvarov)
-
Thu Mar 22 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.6.el5uek]
- ocfs2: Rollback commit ea455f8ab68338ba69f5d3362b342c115bea8e13 (Sunil
Mushran) [orabug: 13555276]
- ocfs2: Rollback commit f7b1aa69be138ad9d7d3f31fa56f4c9407f56b6a (Sunil
Mushran) [orabug: 13555276]
- ocfs2: Rollback commit 5fd131893793567c361ae64cbeb28a2a753bbe35 (Sunil
Mushran) [orabug: 13555276]
- ocfs2/cluster: Fix o2net_fill_node_map() (Sunil Mushran)
- ocfs2/cluster: Add new function o2net_fill_node_map() (Sunil Mushran)
- ocfs2: Tighten free bit calculation in the global bitmap (Sunil Mushran)
- ocfs2/trivial: Limit unaligned aio+dio write messages to once per day (Sunil
Mushran)
- btrfs: btrfs_direct_IO_bvec() needs to check for sector alignment (Dave
Kleikamp)
- loop: increase default number of loop devices to 512 (Dave Kleikamp)
- xen/merge error: Re-introduce xen-platform-pci driver. (Konrad Rzeszutek
Wilk)
- x86/PCI: reduce severity of host bridge window conflict warnings (Bjorn
Helgaas)
- xen/acpi: Remove the WARN's as they just create noise. (Konrad Rzeszutek
Wilk)
-
Wed Mar 21 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.5.el5uek]
- btrfs: create btrfs_file_write_iter() (Dave Kleikamp)
-
Wed Mar 21 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-200.0.4.el5uek]
- ocfs2/trivial: Print message indicating unaligned aio+dio write (Sunil
Mushran)
- ocfs2: Avoid livelock in ocfs2_readpage() (Jan Kara)
- ocfs2: serialize unaligned aio (Mark Fasheh)
- ocfs2: null deref on allocation error (Dan Carpenter)
- ocfs2: Bugfix for hard readonly mount (Tiger Yang)
-
Mon Mar 19 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-200.0.3.el5uek]
- xen/blkback: Disable DISCARD support for loopback device (but leave for phy).
(Konrad Rzeszutek Wilk)
- block: fix patch import error in max_discard_sectors check (Jens Axboe)
- block: eliminate potential for infinite loop in blkdev_issue_discard (Mike
Snitzer)
- config: Use the xen-acpi-processor instead of the cpufreq-xen driver. (Konrad
Rzeszutek Wilk)
- xen/acpi-processor: C and P-state driver that uploads said data to
hypervisor. (Konrad Rzeszutek Wilk)
- Revert "Merge branch 'stable/cpufreq-xen.v6.rebased' into uek2-merge" (Konrad
Rzeszutek Wilk)
-
Wed Mar 14 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-200.0.2.el5uek]
- xen: make page table walk hugepages aware (Dave McCracken) [Orabug: 13719997]
- x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems (Narendra_K)
-
Sun Mar 11 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-200.0.1.el5uek]
- disable kabicheck for uek2 update 1 beta
- nfs: only dirty user pages in direct read code (Dave Kleikamp)
- config: Enable Xen's PV USB, SCSI, MCE and Xen CPU freq driver (Konrad
Rzeszutek Wilk)
- [CPUFREQ] xen: governor for Xen hypervisor frequency scaling. (Konrad
Rzeszutek Wilk)
- xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. (Konrad
Rzeszutek Wilk)
- Revert "Merge branch 'stable/processor-passthru.v5.rebased' into uek2-merge"
(Konrad Rzeszutek Wilk)
- xen/processor-passthru: threads aren't suppose to leave on their own. (Konrad
Rzeszutek Wilk)
- config: Enable Xen's PV USB, SCSI, MCE and Processor-Passthru (Konrad
Rzeszutek Wilk)
- Xen: Export host physical CPU information to dom0 (Liu Jinsong)
- xen/mce: Change the machine check point (Liu Jinsong)
- Add mcelog support from xen platform (Liu Jinsong)
- usb: xen pvusb driver (Nathanael Rensen)
- xen/processor-passthru: Provide an driver that passes struct acpi_processor
data to the hypervisor. (Konrad Rzeszutek Wilk)
- xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. (Konrad
Rzeszutek Wilk)
- xen/setup/pm/acpi: Remove the call to boot_option_idle_override. (Konrad
Rzeszutek Wilk)
- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)
- xen/pm_idle: Make pm_idle be default_idle under Xen. (Konrad Rzeszutek Wilk)
- cpuidle: stop depending on pm_idle (Len Brown)
- cpuidle: replace xen access to x86 pm_idle and default_idle (Len Brown)
- cpuidle: create bootparam "cpuidle.off=1" (Len Brown)
- Revert "Merge branch 'stable/acpi-cpufreq.v3.rebased' into uek2-merge"
(Konrad Rzeszutek Wilk)
- x86/microcode: check proper return code. (Ben Guthro)
- xen: add CPU microcode update driver (Jeremy Fitzhardinge)
- xen: add dom0_op hypercall (Jeremy Fitzhardinge)
- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)
- nfs: add support for read_iter, write_iter (Dave Kleikamp)
- xenbus_dev: add missing error check to watch handling (Jan Beulich)
- xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. (Konrad
Rzeszutek Wilk)
- xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback
(Stefano Stabellini)
- xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while
atomic. (Konrad Rzeszutek Wilk)
- xen/bootup: During bootup suppress XENBUS: Unable to read cpu state (Konrad
Rzeszutek Wilk)
- Merge conflict resolved. Somehow the letter 's' slipped in the Makefile. This
fixes the compile issues. (Konrad Rzeszutek Wilk)
- xen/events: BUG() when we can't allocate our event->irq array. (Konrad
Rzeszutek Wilk)
- xen/granttable: Disable grant v2 for HVM domains. (Konrad Rzeszutek Wilk)
- xen-blkfront: Use kcalloc instead of kzalloc to allocate array (Thomas Meyer)
- xen/pciback: Expand the warning message to include domain id. (Konrad
Rzeszutek Wilk)
- xen/pciback: Fix "device has been assigned to X domain!" warning (Konrad
Rzeszutek Wilk)
- xen/xenbus: don't reimplement kvasprintf via a fixed size buffer (Ian
Campbell)
- xenbus: maximum buffer size is XENSTORE_PAYLOAD_MAX (Ian Campbell)
- xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX. (Ian
Campbell)
- Xen: consolidate and simplify struct xenbus_driver instantiation (Jan
Beulich)
- xen-gntalloc: introduce missing kfree (Julia Lawall)
- xen/xenbus: Fix compile error - missing header for xen_initial_domain()
(Konrad Rzeszutek Wilk)
- xen/netback: Enable netback on HVM guests (Daniel De Graaf)
- xen/grant-table: Support mappings required by blkback (Daniel De Graaf)
- xenbus: Use grant-table wrapper functions (Daniel De Graaf)
- xenbus: Support HVM backends (Daniel De Graaf)
- xen/xenbus-frontend: Fix compile error with randconfig (Konrad Rzeszutek
Wilk)
- xen/xenbus-frontend: Make error message more clear (Bastian Blank)
- xen/privcmd: Remove unused support for arch specific privcmp mmap (Bastian
Blank)
- xen: Add xenbus_backend device (Bastian Blank)
- xen: Add xenbus device driver (Bastian Blank)
- xen: Add privcmd device driver (Bastian Blank)
- xen/gntalloc: fix reference counts on multi-page mappings (Daniel De Graaf)
- xen/gntalloc: release grant references on page free (Daniel De Graaf)
- xen/events: prevent calling evtchn_get on invalid channels (Daniel De Graaf)
- xen/granttable: Support transitive grants (Annie Li)
- xen/granttable: Support sub-page grants (Annie Li)
- xen/granttable: Improve comments for function pointers (Annie Li)
- xen/ia64: fix build breakage because of conflicting u64 guest handles (Tony
Luck)
- xen/granttable: Keep code format clean (Annie Li)
- xen/granttable: Grant tables V2 implementation (Annie Li)
- xen/granttable: Refactor some code (Annie Li)
- xen/granttable: Introducing grant table V2 stucture (Annie Li)
- Xen: update MAINTAINER info (Jeremy Fitzhardinge)
- xen/event: Add reference counting to event channels (Daniel De Graaf)
- xen/gnt{dev,alloc}: reserve event channels for notify (Daniel De Graaf)
- xen/gntalloc: Change gref_lock to a mutex (Daniel De Graaf)
- xen: document backend sysfs files (David Vrabel)
- xen: document balloon driver sysfs files (David Vrabel)
- btrfs: add support for read_iter, write_iter, and direct_IO_bvec (Dave
Kleikamp)
- ext4: add support for read_iter, write_iter, and direct_IO_bvec (Dave
Kleikamp)
- ocfs2: add support for read_iter, write_iter, and direct_IO_bvec (Dave
Kleikamp)
- ext3: add support for .read_iter and .write_iter (Dave Kleikamp)
- bio: add bvec_length(), like iov_length() (Dave Kleikamp)
- aio: add aio support for iov_iter arguments (Zach Brown)
- aio: add aio_kernel_() interface (Dave Kleikamp)
- fs: pull iov_iter use higher up the stack (Dave Kleikamp)
- dio: add __blockdev_direct_IO_bdev() (Dave Kleikamp)
- dio: add dio_post_submission() helper function (Dave Kleikamp)
- dio: add dio_lock_and_flush() helper (Dave Kleikamp)
- dio: add sdio_init() helper function (Dave Kleikamp)
- dio: add dio_alloc_init() helper function (Dave Kleikamp)
- dio: create a dio_aligned() helper function (Zach Brown)
- iov_iter: let callers extract iovecs and bio_vecs (Zach Brown)
- iov_iter: add a shorten call (Zach Brown)
- iov_iter: add bvec support (Zach Brown)
- iov_iter: hide iovec details behind ops function pointers (Zach Brown)
- fuse: convert fuse to use iov_iter_copy_[to|from]_user (Dave Kleikamp)
- iov_iter: add copy_to_user support (Zach Brown)
- iov_iter: move into its own file (Zach Brown)
- xen/scsi[front|back]: consolidate and simplify struct xenbus_driver
instantiation (Konrad Rzeszutek Wilk)
- xen/scsiback: allow RESERVE/RELEASE commands (James Harper)
- xen/scsiback: vscsi >2TB patch (Samuel Kvasnica)
- xen-scsi[front|back]: Fix warnings and bugs. (Konrad Rzeszutek Wilk)
- xen/scsi[front|back]: Forgot .owner attribute. (Konrad Rzeszutek Wilk)
- xen/scsi[front|back]: Initial commit from Novell SLES11SP1 2.6.32 tree.
(Konrad Rzeszutek Wilk)
- xen/pci:use hypercall PHYSDEVOP_restore_msi_ext to restore MSI/MSI-X vectors
(Liang Tang)
- xen/acpi/sleep: Register to the acpi_suspend_lowlevel a callback. (Konrad
Rzeszutek Wilk)
- xen/acpi/sleep: Enable ACPI sleep via the __acpi_override_sleep (Konrad
Rzeszutek Wilk)
- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)
- xen: Utilize the restore_msi_irqs hook. (Konrad Rzeszutek Wilk)
- x86/acpi/sleep: Provide registration for acpi_suspend_lowlevel. (Liang Tang)
- x86, acpi, tboot: Have a ACPI sleep override instead of calling tboot_sleep.
(Konrad Rzeszutek Wilk)
- x86: Expand the x86_msi_ops to have a restore MSIs. (Konrad Rzeszutek Wilk)
-
Tue Mar 06 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.5.1.el5uek]
- proc: make sure mem_open() doesn't pin the target's memory (Oleg Nesterov)
- proc: mem_release() should check mm != NULL (Oleg Nesterov) [orabug 13811116]
- proc: unify mem_read() and mem_write() (Oleg Nesterov)
-
Thu Mar 01 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.4.1.el5uek]
- sysfs: restore upstream sysfs code (Guru Anbalagane)
- rpm: remove symlink on uninstall (Maxim Uvarov) [Orabug: 13791936]
- Btrfs: fix casting error in scrub reada code (Chris Mason)
-
Wed Feb 22 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.3.1.el5uek]
- Btrfs: clear the extent uptodate bits during parent transid failures (Chris
Mason)
- Btrfs: add extra sanity checks on the path names in btrfs_mksubvol (Chris
Mason)
- Btrfs: make sure we update latest_bdev (Chris Mason)
- Btrfs: improve error handling for btrfs_insert_dir_item callers (Chris Mason)
- fnic: return zero on fnic_reset() success (Joe Jin)
- [SCSI] libfc: improve flogi retries to avoid lport stuck (Vasu Dev)
- [SCSI] libfc: avoid exchanges collision during lport reset (Vasu Dev)
- igbvf: update version number (Williams, Mitch A)
-
Tue Feb 14 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.2.1.el5uek]
- config: enable dm-nfs (Guru Anbalagane)
- Update lpfc version for 8.3.5.58.2p driver release (Chuck Anderson)
- Fix build warning with uninitialized variable (Chuck Anderson)
- Fix warning on i386 system (CR 123966) (Chuck Anderson)
- Fix mailbox and vpi memory leaks causing crashes (CR 126818) (Chuck Anderson)
- Fixed unbounded firmware revision string from port caused the system panic
(CR 126560) (Chuck Anderson)
-
Tue Feb 07 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.1.1.el5uek]
- mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block
during isolation for migration (Mel Gorman)
- block: Disable autoprotect (Martin K. Petersen)
- enic: do vlan cleanup (Jiri Pirko)
- enic: Add support to configure hardware interrupt coalesce timers in a
platform independent way (Vasanthy Kolluri)
- enic: Partial: Bug Fix: Fix hardware transmit queue indexing in
enic_poll_controller (Vasanthy Kolluri)
- enic: Get/Set interrupt resource index for transmit and receive queues
(Vasanthy Kolluri)
- enic: Log device configuration in detail during driver load (Vasanthy
Kolluri)
- enic: Pass 802.1p bits for packets tagged with vlan zero (Vasanthy Kolluri)
- enic: update to support 64 bit stats (stephen hemminger)
- enic: Add support for MTU change via port profile on a dynamic vnic (Roopa
Prabhu)
- drivers/net: Remove unnecessary semicolons (Joe Perches)
- [SCSI] megaraid_sas Version to 5.40-rc1 and Changelog update (Adam Radford)
- [SCSI] megaraid_sas: Add .change_queue_depth support (Adam Radford)
- [SCSI] megaraid_sas: Fix FastPath I/O to work on degraded raid 1 (Adam
Radford)
- bnx2x: add missing break in bnx2x_dcbnl_get_cap (Shmulik Ravid)
- bnx2x: fix hw attention handling (Dmitry Kravkov)
- bnx2x: prevent flooded warnning kernel info (Joe Jin)
- Btrfs: don't reserve data with extents locked in btrfs_fallocate (Chris
Mason)
- watchdog: hpwdt: prevent multiple "NMI occurred" messages (Naga Chumbalkar)
- watchdog: hpwdt: add next gen HP servers (Thomas Mingarelli)
- bnx2fc: Update copyright and bump version to 1.0.4 (Bhanu Prakash Gollapudi)
- bnx2fc: Tx BDs cache in write tasks (Bhanu Prakash Gollapudi)
- bnx2fc: Do not arm CQ when there are no CQEs (Bhanu Prakash Gollapudi)
- bnx2fc: hold tgt lock when calling cmd_release (Bhanu Prakash Gollapudi)
- bnx2fc: Enable support for sequence level error recovery (Bhanu Prakash
Gollapudi)
- bnx2fc: HSI changes for tape (Bhanu Prakash Gollapudi)
- bnx2fc: Handle REC_TOV error code from firmware (Bhanu Prakash Gollapudi)
- bnx2fc: REC/SRR link service request and response handling (Bhanu Prakash
Gollapudi)
- bnx2fc: Support 'sequence cleanup' task (Bhanu Prakash Gollapudi)
- bnx2fc: Enable REC & CONF support for the session (Bhanu Prakash Gollapudi)
- bnx2fc: Introduce interface structure for each vlan interface (Bhanu Prakash
Gollapudi)
- bnx2fc: Replace printks with KERN_ALERT to KERN_ERR/KERN_INFO (Bhanu Prakash
Gollapudi)
- cnic: Add VLAN ID as a parameter during netevent upcall (Michael Chan)
- bnx2i: Updated copyright and bump version (Eddie Wai)
- bnx2i: Modified to skip CNIC registration if iSCSI is not supported (Eddie
Wai)
- bnx2i: Added the use of kthreads to handle SCSI cmd completion (Eddie Wai)
- iscsi: Use struct scsi_lun in iscsi structs instead of u8[8] (Andy Grover)
- cnic: Wait for all Context IDs to be deleted before sending FCOE_DESTROY_FUNC
(Michael Chan)
- cnic: Fix Context ID space calculation (Michael Chan)
- bnx2x: Implementation for netdev->ndo_fcoe_get_wwn (Vladislav Zolotarov)
- bnx2: Fix endian swapping on firmware version string (Michael Chan)
- bnx2: Close device if tx_timeout reset fails (Michael Chan)
- bnx2: Read iSCSI config from shared memory during ->probe() (Michael Chan)
- bnx2: Add MCP dump (Jeffrey Huang)
- bnx2: remove unnecessary read of PCI_CAP_ID_EXP (Jon Mason)
- cnic: Return proper error code if we fail to send netlink message (Michael
Chan)
- cnic: Fix ring setup/shutdown code (Michael Chan)
- cnic: Fix port_mode setting (Michael Chan)
- cnic: Replace get_random_bytes() with random32() (Michael Chan)
- cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840 (Michael
Chan)
- drivers/net: Remove casts of void * (Joe Perches)
- bnx2fc: Fix kernel panic when deleting NPIV ports (Bhanu Prakash Gollapudi)
- bnx2fc: scsi_dma_unmap() not invoked on IO completions (Bhanu Prakash
Gollapudi)
- bnx2fc: host stats show the link speed 'unknown' on NIC partitioned
interfaces (Bhanu Prakash Gollapudi)
- bnx2x: Update date to 2011/06/13 and version to 1.70.00-0 (Vladislav
Zolotarov)
- bnx2x: PFC support for 578xx (Dmitry Kravkov)
- bnx2x: Rename LASI registers to definitions in mdio.h (Yaniv Rosner)
- bnx2x: Add a periodic task for link PHY events (Yaniv Rosner)
- bnx2x: Adjust BCM84833 to BCM578xx (Yaniv Rosner)
- bnx2x: Adjust ETS to 578xx (Yaniv Rosner)
- bnx2x: Add new PHY 54616s (Yaniv Rosner)
- bnx2x: Add Warpcore support for 578xx (Yaniv Rosner)
- bnx2x: Add new MAC support for 578xx (Yaniv Rosner)
- bnx2x: Cosmetic changes. (Dmitry Kravkov)
- bnx2x: update DCB data during PMF migration (Dmitry Kravkov)
- bnx2x: 57712 parity handling (Vladislav Zolotarov)
- New 7.0 FW: bnx2x, cnic, bnx2i, bnx2fc (Vlad Zolotarov)
- cnic: Move indexing function pointers to struct kcq_info (Michael Chan)
- linux-firmware: Add a new FW 7.0.20.0 (Vladislav Zolotarov)
- ixgbe: Fix FCOE memory leak for DDP packets (Alexander Duyck)
- ixgbe: fix PHY link setup for 82599 (Emil Tantilov)
- ixgbe: fix __ixgbe_notify_dca() bail out code (Don Skidmore)
- ixgbe: convert to ndo_fix_features (Don Skidmore)
- ixgbe: only enable WoL for magic packet by default (Andy Gospodarek)
- ixgbe: remove ifdef check for non-existent define (Emil Tantilov)
- ixgbe: Pass staterr instead of re-reading status and error bits from
descriptor (Alexander Duyck)
- ixgbe: Move interrupt related values out of ring and into q_vector (Alexander
Duyck)
- ixgbe: add structure for containing RX/TX rings to q_vector (Alexander Duyck)
- ixgbe: inline the ixgbe_maybe_stop_tx function (Alexander Duyck)
- ixgbe: Update ATR to use recorded TX queues instead of CPU for routing
(Alexander Duyck)
- ixgbe: Make certain to initialize the fdir_perfect_lock in all cases
(Alexander Duyck)
- e1000: always call e1000_check_for_link() on e1000_ce4100 MACs. (Nicolas
Schichan)
- e1000: do vlan cleanup (Jiri Pirko)
- e1000: convert to ndo_fix_features (Michał Mirosław)
- e1000: remove unnecessary code (Greg Dietsche)
- igbvf: do vlan cleanup (Jiri Pirko)
- ixgbe: A fix to VF TX rate limit (Lior Levy)
- ixgbe: Update method used for determining descriptor count for an skb
(Alexander Duyck)
- ixgbe: Add one function that handles most of context descriptor setup
(Alexander Duyck)
- ixgbe: Move all values that deal with count, next_to_use, next_to_clean to
u16 (Alexander Duyck)
- ixgbe: Convert IXGBE_DESC_UNUSED from macro to static inline function
(Alexander Duyck)
- ixgbe: pass adapter struct instead of netdev for interrupt data (Alexander
Duyck)
- ixgbe: update driver version string (Don Skidmore)
- ixgbe: fix ring assignment issues for SR-IOV and drop cases (Alexander Duyck)
- ixgbe: disable RSC when Rx checksum is off (Emil Tantilov)
- ixgbe: move reset code into a separate function (Emil Tantilov)
- ixgbe: move setting RSC into a separate function (Emil Tantilov)
- ixgbe: add support for nfc addition and removal of filters (Alexander Duyck)
- ixgbe: add support for displaying ntuple filters via the nfc interface
(Alexander Duyck)
- ixgbe: add basic support for setting and getting nfc controls (Alexander
Duyck)
- ixgbe: update perfect filter framework to support retaining filters
(Alexander Duyck)
- ixgbe: fix flags relating to perfect filters to support coexistence
(Alexander Duyck)
- ixgbe: remove ntuple filtering (Alexander Duyck)
- ixgbe: setup per CPU PCI pool for FCoE DDP (Vasu Dev)
- ixgbe: add support for Dell CEM (Emil Tantilov)
- bnx2x: Created bnx2x_sp (Vladislav Zolotarov)
- bnx2x: removed unused variables (Dmitry Kravkov)
- bnx2x: use bnx2x_reload_if_running (Dmitry Kravkov)
- bnx2x: dump FW memory when appropriate msglvl is raised (Dmitry Kravkov)
- bnx2x: do not call link update without HW notification (Yaniv Rosner)
- bnx2x: disable fairness if ETS is enabled (Dmitry Kravkov)
- bnx2x: avoid release of unrequested irqs (Dmitry Kravkov)
- bnx2x: put start bd csum in separate function (Dmitry Kravkov)
- bnx2x: remove references to intr_sem (Dmitry Kravkov)
- bnx2x: do not allocate FCoE ring if disabled (Dmitry Kravkov)
- bnx2x: Improve cl45 access methods (Yaniv Rosner)
- bnx2x: Modify XGXS functions (Yaniv Rosner)
- bnx2x: Fix link status sync (Yaniv Rosner)
- bnx2x: Adjust BCM8726 module detection settings (Yaniv Rosner)
- bnx2x: Fix grammar and relocate code (Yaniv Rosner)
- bnx2x: Fix BCM84833 settings (Yaniv Rosner)
- bnx2x: Fix over current port display (Yaniv Rosner)
- bnx2x: Add TX fault check for fiber PHYs (Yaniv Rosner)
- bnx2x: Change return status type (Yaniv Rosner)
- bnx2x: Fix port type display (Yaniv Rosner)
- bnx2x: Add new phy BCM8722 (Yaniv Rosner)
- Revert "bnx2fc: Fix kernel panic when deleting NPIV ports" (Bob Picco)
- Revert "bnx2fc: scsi_dma_unmap() not invoked on IO completions" (Bob Picco)
- Revert "bnx2x: prevent flooded warnning kernel info" (Bob Picco)
- Revert "bnx2x: fix hw attention handling" (Bob Picco)
- Revert "bnx2x: add missing break in bnx2x_dcbnl_get_cap" (Bob Picco)
- ixgbe: DCB and perfect filters can coexist (John Fastabend)
- ixgbe: fix bit mask for DCB version (John Fastabend)
- ixgbe: setup redirection table for multiple packet buffers (John Fastabend)
- ixgbe: DCB 82598 devices, tx_idx and rx_idx swapped (John Fastabend)
- ixgbe: DCB use existing TX and RX queues (John Fastabend)
- ixgbe: configure minimal packet buffers to support TC (John Fastabend)
- ixgbe: consolidate MRQC and MTQC handling (John Fastabend)
- ixgbe: consolidate packet buffer allocation (John Fastabend)
- ixgbe: dcbnl reduce duplicated code and indentation (John Fastabend)
- ixgbevf: do vlan cleanup (Jiri Pirko)
- ixgbevf: remove unnecessary ampersands (Stephen Hemminger)
- ixgbevf: Fix bungled declaration of ixgbevf_mbx_ops (Greg Rose)
- ixgbevf: Update the driver string (Greg Rose)
- e1000e: workaround invalid Tx/Rx tail descriptor register write (Bruce Allan)
- e1000e: Spurious interrupts & dropped packets with 82577/8/9 in half-duplex
(Bruce Allan)
- e1000e: increase driver version number (Bruce Allan)
- e1000e: alternate MAC address update (Bruce Allan)
- e1000e: do not disable receiver on 82574/82583 (Bruce Allan)
- e1000e: minor re-order of #include files (Bruce Allan)
- e1000e: remove unnecessary check for NULL pointer (Bruce Allan)
- intel drivers: repair missing flush operations (Jesse Brandeburg)
- e1000e: use GFP_KERNEL allocations at init time (Jeff Kirsher)
- e1000e: Add Jumbo Frame support to 82583 devices (Carolyn Wyborny)
- e1000e: remove e1000_queue_stats (Eric Dumazet)
- net: e1000e: Use is_multicast_ether_addr helper (Tobias Klauser)
- e1000e: remove unnecessary reads of PCI_CAP_ID_EXP (Jon Mason)
- e1000e: update driver version (Bruce Allan)
- e1000e: Clear host wakeup bit on 82577/8 without touching PHY page 800 (Bruce
Allan)
- e1000e: access multiple PHY registers on same page at the same time (Bruce
Allan)
- e1000e: do not schedule the Tx queue until ready (Bruce Allan)
- e1000e: log when swflag is cleared unexpectedly on ICH/PCH devices (Bruce
Allan)
- e1000e: 82579 intermittently disabled during S0->Sx (Bruce Allan)
- e1000e: disable far-end loopback mode on ESB2 (Bruce Allan)
- net: introduce __netdev_alloc_skb_ip_align (Eric Dumazet)
- update modsign (Maxim Uvarov) [Orabug: 13615815]
-
Tue Jan 31 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.22.el5uek]
- xfs: fix acl count validation in xfs_acl_from_disk() (Dan Carpenter)
CVE-2012-0038
- Updated driver version to 5.02.00.00.06.02-uek2 (Tej Parkash)
- ocfs2: use spinlock irqsave for downconvert lock.patch (Srinivas Eeda)
- dm-nfs-for-uek2 (Adnan Misherfi)
-
Thu Jan 26 2012 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.21.el5uek]
- git-changelog: add Orabug and CVE (Maxim Uvarov) [Add parsing Orabug and
CVE.]
- qla2xxx: Update the driver version to 8.03.07.12.39.0-k. (Giridhar Malavali)
- Add support for pv hugepages and support for huge balloon pages. (Dave
McCracken)
- Btrfs: remove some verbose warnings (Chris Mason)
- Btrfs: fix reservations in btrfs_page_mkwrite (Chris Mason)
- Btrfs: use larger system chunks (Chris Mason)
- Btrfs: add a delalloc mutex to inodes for delalloc reservations (Josef Bacik)
- Btrfs: protect orphan block rsv with spin_lock (Josef Bacik)
- Btrfs: don't call btrfs_throttle in file write (Josef Bacik)
- Btrfs: release space on error in page_mkwrite (Josef Bacik)
- Btrfs: fix btrfsck error 400 when truncating a compressed (Miao Xie)
- Btrfs: do not use btrfs_end_transaction_throttle everywhere (Josef Bacik)
- Btrfs: fix possible deadlock when opening a seed device (Li Zefan)
- Btrfs: update global block_rsv when creating a new block group (Li Zefan)
- Btrfs: rewrite btrfs_trim_block_group() (Li Zefan)
- Btrfs: simplfy calculation of stripe length for discard operation (Li Zefan)
- Btrfs: don't pre-allocate btrfs bio (Li Zefan)
- Btrfs: don't pass a trans handle unnecessarily in volumes.c (Li Zefan)
- Btrfs: reserve metadata space in btrfs_ioctl_setflags() (Li Zefan)
- Btrfs: remove BUG_ON()s in btrfs_ioctl_setflags() (Li Zefan)
- Btrfs: check the return value of io_ctl_init() (Li Zefan)
- Btrfs: avoid possible NULL deref in io_ctl_drop_pages() (Li Zefan)
- Btrfs: add pinned extents to on-disk free space cache correctly (Li Zefan)
- Btrfs: revamp clustered allocation logic (Alexandre Oliva)
- Btrfs: don't set up allocation result twice (Alexandre Oliva)
- Btrfs: test free space only for unclustered allocation (Alexandre Oliva)
- Btrfs: use bigger metadata chunks on bigger filesystems (Chris Mason)
- Btrfs: lower the bar for chunk allocation (Chris Mason)
- Btrfs: run chunk allocations while we do delayed refs (Chris Mason)
- Btrfs: call d_instantiate after all ops are setup (Al Viro)
- Btrfs: fix worker lock misuse in find_worker (Chris Mason)
- xen/config: turn CONFIG_XEN_DEBUG_FS off. (Konrad Rzeszutek Wilk)
- proc: clean up and fix /proc/<pid>/mem handling (Maxim Uvarov) [Orabug:
13618927] CVE-2012-0056
- set XEN_MAX_DOMAIN_MEMORY for 512 (Maxim Uvarov)
- add __init arguments to init functions (Maxim Uvarov)
- hpwdt: clean up set_memory_x call for 32 bit (Maxim Uvarov)
-
Thu Jan 12 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-100.0.20.el5uek]
- Enable Kabi Check (Guru Anbalagane)
- net/bna driver update from 2.3.2.3 to 3.0.2.2 (Maxim Uvarov)
- scsi/bfa driver update from 2.3.2.3 to 3.0.2.2 (Maxim Uvarov)
- Updated version to 5.02.00.00.06.02-uek1 (Tej Parkash)
- qla4xxx: Added error logging for firmware abort (Nilesh Javali)
- qla4xxx: Disable generating pause frames in case of FW hung (Giridhar
Malavali)
- qla4xxx: Temperature monitoring for ISP82XX core. (Mike Hernandez)
- qla4xxx: check for FW alive before calling chip_reset (Shyam Sunder)
- qla4xxx: Remove the unused macros (Tej Parkash)
- qla4xxx: cleanup, make qla4xxx_build_ddb_list short (Lalit Chandivade)
- qla4xxx: clear the RISC interrupt bit during firmware init (Sarang Radke)
- qla4xxx: clear the SCSI COMPLETION INTERRUPT bit during firmware init
(Prasanna Mumbai)
- qla4xxx: Fixed BFS with sendtargets as boot index. (Manish Rangankar)
- qla4xxx: Correct the default relogin timeout value (Nilesh Javali)
- qla4xxx: Limit the ACB Default Timeout value to 12s (Nilesh Javali)
- bond_alb: don't disable softirq under bond_alb_xmit (Maxim Uvarov)
- fix kernel version (Guru Anbalagane)
-
Tue Jan 10 2012 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-100.0.19.el5uek]
- scripts/git-changelog: generate rpm changelog script (Maxim Uvarov)
- Revert "hpwd watchdog mark page executable" (Maxim Uvarov)
- Partial revert of mainline removal of deprecated sysfs interface for 13568528
(Chuck Anderson)
- scsi:lpfc update to 8.3.5.58 (Maxim Uvarov)
- Let KERNEL_VERSION be 3.0.x, and override UTSNAME (Nelson Elhage)
- qla4xxx: Fix qla4xxx_dump_buffer to dump buffer correctly (Vikas Chaudhary)
- qla4xxx: Fix the IDC locking mechanism (Nilesh Javali)
- qla4xxx: Wait for disable_acb before doing set_acb (Vikas Chaudhary)
- qla4xxx: Don't recover adapter if device state is FAILED (Sarang Radke)
- qla4xxx: fix call trace on rmmod with ql4xdontresethba=1 (Sarang Radke)
- qla4xxx: Fix CPU lockups when ql4xdontresethba set (Mike Hernandez)
- qla4xxx: Perform context resets in case of context failures. (Vikas
Chaudhary)
- do not obsolete firmware (Maxim Uvarov)
- Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from
old kernel" (Konrad Rzeszutek Wilk)
- Revert "xen-blkback: convert hole punching to discard request on loop
devices" (Maxim Uvarov)
- ath9k: Fix kernel panic in AR2427 in AP mode (Mohammed Shafi Shajakhan)
- ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race
(Oleg Nesterov)
- Revert "rtc: Disable the alarm in the hardware" (Linus Torvalds)
- hung_task: fix false positive during vfork (Mandeep Singh Baines)
- drm/radeon/kms/atom: fix possible segfault in pm setup (Alexander Müller)
- xfs: log all dirty inodes in xfs_fs_sync_fs (Christoph Hellwig)
- xfs: log the inode in ->write_inode calls for kupdate (Christoph Hellwig)
- mfd: Turn on the twl4030-madc MADC clock (Kyle Manna)
- mfd: Check for twl4030-madc NULL pointer (Kyle Manna)
- mfd: Copy the device pointer to the twl4030-madc structure (Kyle Manna)
- mfd: Fix mismatch in twl4030 mutex lock-unlock (Sanjeev Premi)
- iwlwifi: update SCD BC table for all SCD queues (Emmanuel Grumbach)
- ipv4: using prefetch requires including prefetch.h (Stephen Rothwell)
- ipv4: reintroduce route cache garbage collector (Eric Dumazet)
- ipv4: flush route cache after change accept_local (Weiping Pan)
- sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd (Thomas
Graf)
- sctp: fix incorrect overflow check on autoclose (Xi Wang)
- sch_gred: should not use GFP_KERNEL while holding a spinlock (Eric Dumazet)
- net: have ipconfig not wait if no dev is available (Gerlando Falauto)
- mqprio: Avoid panic if no options are provided (Thomas Graf)
- llc: llc_cmsg_rcv was getting called after sk_eat_skb. (Alex Juncu)
- ppp: fix pptp double release_sock in pptp_bind() (Djalal Harouni)
- net: bpf_jit: fix an off-one bug in x86_64 cond jump target (Markus Kötter)
- sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls.
(David S. Miller)
- sparc64: Fix masking and shifting in VIS fpcmp emulation. (David S. Miller)
- sparc32: Correct the return value of memcpy. (David S. Miller)
- sparc32: Remove uses of %g7 in memcpy implementation. (David S. Miller)
- sparc32: Remove non-kernel code from memcpy implementation. (David S. Miller)
- sparc: Kill custom io_remap_pfn_range(). (David S. Miller)
- sparc64: Patch sun4v code sequences properly on module load. (David S.
Miller)
- sparc32: Be less strict in matching %lo part of relocation. (David S. Miller)
- sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq(). (David S.
Miller)
- mm: hugetlb: fix non-atomic enqueue of huge page (Hillf Danton)
- drm/radeon/kms: bail on BTC parts if MC ucode is missing (Alex Deucher)
- watchdog: hpwdt: Changes to handle NX secure bit in 32bit path (Mingarelli,
Thomas)
- futex: Fix uninterruptible loop due to gate_area (Hugh Dickins)
- oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue (Vladimir Zapolskiy)
- ARM: 7220/1: mmc: mmci: Fixup error handling for dma (Ulf Hansson)
- ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR (Ulf Hansson)
- ARM:imx:fix pwm period value (Jason Chen)
- VFS: Fix race between CPU hotplug and lglocks (Srivatsa S. Bhat)
- memcg: keep root group unchanged if creation fails (Hillf Danton)
- iwlwifi: allow to switch to HT40 if not associated (Wey-Yi Guy)
- iwlwifi: do not set the sequence control bit is not needed (Wey-Yi Guy)
- ath9k: fix max phy rate at rate control init (Rajkumar Manoharan)
- media: s5p-fimc: Use correct fourcc for RGB565 colour format (Sylwester
Nawrocki)
- vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL (Dave
Kleikamp)
- mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver (Ilya
Yanok)
- cgroups: fix a css_set not found bug in cgroup_attach_proc (Mandeep Singh
Baines)
- mmc: vub300: fix type of firmware_rom_wait_states module parameter (Rusty
Russell)
- nilfs2: unbreak compat ioctl (Thomas Meyer)
- SELinux: Fix RCU deref check warning in sel_netport_insert() (David Howells)
- NFSv4.1: Ensure that we handle _all_ SEQUENCE status bits. (Trond Myklebust)
- oprofile: Fix uninitialized memory access when writing to writing to
oprofilefs (Robert Richter)
- oom: fix integer overflow of points in oom_badness (Frantisek Hrbata)
- binary_sysctl(): fix memory leak (Michel Lespinasse)
- percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses
(Eugene Surovegin)
- Input: synaptics - fix touchpad not working after S2R on Vostro V13 (Dmitry
Torokhov)
- MXC PWM: should active during DOZE/WAIT/DBG mode (Jason Chen)
- ssb: fix init regression with SoCs (Hauke Mehrtens)
- block: initialize request_queue's numa node during (Mike Snitzer)
- mac80211: fix another race in aggregation start (Johannes Berg)
- SCSI: fcoe: Fix preempt count leak in fcoe_filter_frames() (Thomas Gleixner)
- SCSI: zfcp: return early from slave_destroy if slave_alloc returned early
(Steffen Maier)
- cfq-iosched: fix cfq_cic_link() race confition (Yasuaki Ishimatsu)
- cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails (majianpeng)
- drm/i915: prevent division by zero when asking for chipset power (Eugeni
Dodonov)
- rtc: m41t80: Workaround broken alarm functionality (John Stultz)
- ipip, sit: copy parms.name after register_netdevice (Ted Feng)
- ARM: OMAP: rx51: fix USB (Felipe Contreras)
- Revert "clockevents: Set noop handler in clockevents_exchange_device()"
(Linus Torvalds)
- ASoC: core: Don't schedule deferred_resume_work twice (Stephen Warren)
- USB: option: Removing one bogus and adding some new Huawei combinations
(Bjørn Mork)
- usb: option: Add Huawei E398 controlling interfaces (Alex Hermann)
- USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. (Krzysztof Hałasa)
- ibft: Fix finding IBFT ACPI table on UEFI (Yinghai Lu)
- drm/radeon/kms: add some new pci ids (Alex Deucher)
- staging: r8712u: Add new USB ID (Larry Finger)
- fuse: fix fuse_retrieve (Miklos Szeredi)
- ext4: handle EOF correctly in ext4_bio_write_page() (Yongqiang Yang)
- ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize
(Yongqiang Yang)
- ext4: avoid hangs in ext4_da_should_update_i_disksize() (Andrea Arcangeli)
- ext4: display the correct mount option in /proc/mounts for [no]init_itable
(Theodore Ts'o)
- md/raid5: fix bug that could result in reads from a failed device.
(NeilBrown)
- xfs: avoid synchronous transactions when deleting attr blocks (Christoph
Hellwig)
- xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels (Christoph
Hellwig)
- hwmon: (coretemp) Fix oops on CPU offlining (Jean Delvare)
- hfs: fix hfs_find_init() sb->ext_tree NULL ptr oops (Phillip Lougher)
- Make TASKSTATS require root access (Linus Torvalds)
- jbd/jbd2: validate sb->s_first in journal_get_superblock() (Eryu Guan)
- x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked (Mark
Langsdorf)
- mmc: mxcmmc: fix falling back to PIO (Sascha Hauer)
- hwmon: (jz4740) fix signedness bug (Axel Lin)
- linux/log2.h: Fix rounddown_pow_of_two(1) (Linus Torvalds)
- mac80211: fix race condition caused by late addBA response (Nikolay Martynov)
- iwlwifi: do not re-configure HT40 after associated (Wey-Yi Guy)
- percpu: fix chunk range calculation (Tejun Heo)
- intel-iommu: fix superpage support in pfn_to_dma_pte() (Allen Kay)
- intel-iommu: set iommu_superpage on VM domains to lowest common denominator
(Allen Kay)
- intel-iommu: fix return value of iommu_unmap() API (Allen Kay)
- target: Handle 0 correctly in transport_get_sectors_6() (Roland Dreier)
- fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API
(Al Viro)
- mm: vmalloc: check for page allocation failure before vmlist insertion (Mel
Gorman)
- mm: Ensure that pfn_valid() is called once per pageblock when reserving
pageblocks (Michal Hocko)
- ptp: Fix clock_getres() implementation (Thomas Gleixner)
- thp: set compound tail page _count to zero (Youquan Song)
- thp: add compound tail page _mapcount when mapped (Youquan Song)
- fs/proc/meminfo.c: fix compilation error (Claudio Scordino)
- ASoC: Provide a more complete DMA driver stub (Mark Brown)
- ARM: davinci: dm646x evm: wrong register used in
setup_vpif_input_channel_mode (Hans Verkuil)
- ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 (Jean-Christophe
PLAGNIOL-VILLARD)
- arm: mx23: recognise stmp378x as mx23 (Wolfram Sang)
- ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0
(Manjunathappa, Prakash)
- alarmtimers: Fix time comparison (Thomas Gleixner)
- ALSA: hda/realtek - Fix Oops in alc_mux_select() (Takashi Iwai)
- ALSA: sis7019 - give slow codecs more time to reset (David Dillow)
- netconsole support for netfront (Zhenzhong Duan)
- oracleasm: Fix two merge errors (Martin K. Petersen)
- x86/numa: Add constraints check for nid parameters (Petr Holasek)
-
Sun Dec 18 2011 Guru Anbalagane<guru.anbalagane@oracle.com> [2.6.39-100.0.18.el5uek]
- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)
- xen: add dom0_op hypercall (Jeremy Fitzhardinge)
- xen: add CPU microcode update driver (Jeremy Fitzhardinge)
- xen/v86d: Fix /dev/mem to access memory below 1MB (Konrad Rzeszutek Wilk)
- x86/microcode: check proper return code. (Ben Guthro)
- Oracle ASM Kernel Driver (Martin K. Petersen)
- modsign: no sign if keys are missing (Maxim Uvarov)
- Set panic_on_oops to default to true (Maxim Uvarov)
(Andi Kleen)
- direct-io: separate fields only used in the submission path from struct dio
- direct-io: fix a wrong comment (Andi Kleen)
- direct-io: rearrange fields in dio/dio_submit to avoid holes (Andi Kleen)
- direct-io: use a slab cache for struct dio (Andi Kleen)
- direct-io: separate map_bh from dio (Andi Kleen)
- direct-io: inline the complete submission path (Andi Kleen)
- direct-io: merge direct_io_walker into __blockdev_direct_IO (Andi Kleen)
- Install include/drm headers (Maxim Uvarov)
- VFS: Cache request_queue in struct block_device (Andi Kleen)
- DIO: optimize cache misses in the submission path (Andi Kleen)
- put firmware to kernel version specific location (Maxim Uvarov)
- hpwd watchdog mark page executable (Maxim Uvarov)
- SPEC: el5 mkinird more then 5.1.19.6-71.0.10 (Maxim Uvarov)
- SPEC: req udev-095-14.27.0.1.el5_7.1 or more (Maxim Uvarov)
- SPEC: ol6 req dracut-kernel-004-242.0.3 (Maxim Uvarov)
S. Miller)
- sparc64: Force the execute bit in OpenFirmware's translation entries. (David
- sched/rt: Migrate equal priority tasks to available CPUs (Shawn Bohrer)
- sched: Fix up wchan borkage (Simon Kirby)
- ide-disk: Fix request requeuing (Borislav Petkov)
- posix-cpu-timers: Cure SMP wobbles (Peter Zijlstra)
- lis3: fix regression of HP DriveGuard with 8bit chip (Takashi Iwai)
- ASoC: use a valid device for dev_err() in Zylonite (Arnd Bergmann)
- ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC (Axel Lin)
calculation. (Michel Dänzer)
- drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin
- drm/radeon/kms: Fix logic error in DP HPD handler (Alex Deucher)
- drm/radeon/kms: fix regression in DP aux defer handling (Alex Deucher)
- drm/radeon/kms: add retry limits for native DP aux defer (Alex Deucher)
- drm/radeon/kms: fix channel_remap setup (v2) (Alex Deucher)
- ptp: fix L2 event message recognition (Richard Cochran)
- rt2x00: Serialize TX operations on a queue. (Gertjan van Wingerde)
- x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE (Paul Menzel)
- qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload (Roland Dreier)
- libsas: fix panic when single phy is disabled on a wide port (Mark Salyzyn)
- md: Avoid waking up a thread after it has been freed. (NeilBrown)
- dm table: avoid crash if integrity profile changes (Mike Snitzer)
- mmc: mxs-mmc: fix clock rate setting (Koen Beel)
- ARM: mach-ux500: enable fix for ARM errata 754322 (srinidhi kasagar)
Deucher)
- drm/radeon/kms: retry aux transactions if there are status flags (Alex
(Alex Deucher)
- drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1
- ipv6: fix NULL dereference in udp6_ufo_fragment() (Jason Wang)
- ahci: Enable SB600 64bit DMA on Asus M3A (Mark Nelson)
Wysocki)
- MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) (Rafael J.
- ftrace: Fix regression of :mod:module function enabling (Steven Rostedt)
Rostedt)
- ftrace: Fix regression where ftrace breaks when modules are loaded (Steven
Rostedt)
- ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not defined (Steven
- e1000e: workaround for packet drop on 82579 at 100Mbps (Bruce Allan)
- ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES (Linus Walleij)
- ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9 (Will Deacon)
- HID: usbhid: Add support for SiGma Micro chip (Jeremiah Matthey)
- hwmon: (w83627ehf) Properly report thermal diode sensors (Jean Delvare)
- Avoid using variable-length arrays in kernel/sys.c (Linus Torvalds)
- drm/radeon/kms/atom: fix handling of FB scratch indices (Alex Deucher)
- cputimer: Cure lock inversion (Peter Zijlstra)
- fuse: fix memory leak (Miklos Szeredi)
(Thomas Courbon)
- Platform: fix samsung-laptop DMI identification for N150/N210/220/N230
Kosina)
- HID: magicmouse: ignore 'ivalid report id' while switching modes, v2 (Jiri
- uvcvideo: Fix crash when linking entities (Laurent Pinchart)
Forshee)
- hfsplus: ensure bio requests are not smaller than the hardware sectors (Seth
Skeggs)
- drm/ttm: ensure ttm for new node is bound before calling move_notify() (Ben
- drm/ttm: unbind ttm before destroying node in accel move cleanup (Ben Skeggs)
- CIFS: Fix ERR_PTR dereference in cifs_get_root (Pavel Shilovsky)
- xfs: start periodic workers later (Christoph Hellwig)
- xfs: use a cursor for bulk AIL insertion (Dave Chinner)
- xfs: do not update xa_last_pushed_lsn for locked items (Christoph Hellwig)
Hellwig)
- xfs: force the log if we encounter pinned buffers in .iop_pushbuf (Christoph
- xfs: revert to using a kthread for AIL pushing (Christoph Hellwig)
- firewire: sbp2: fix panic after rmmod with slow targets (Chris Boot)
- x86: Fix S4 regression (Takashi Iwai)
- hwmon: (w83627ehf) Fix negative 8-bit temperature values (Jean Delvare)
- mm: fix race between mremap and removing migration entry (Hugh Dickins)
- x25: Prevent skb overreads when checking call user data (Matthew Daley)
- crypto: ghash - Avoid null pointer dereference if no key is set (Nick Bowler)
- ALSA: HDA: conexant support for Lenovo T520/W520 (Daniel Suchy)
- ALSA: hda - Add position_fix quirk for Dell Inspiron 1010 (Takashi Iwai)
Forshee)
- hfsplus: Fix kfree of wrong pointers in hfsplus_fill_super() error path (Seth
- CIFS: Fix incorrect max RFC1002 write size value (Pavel Shilovsky)
- CIFS: Fix DFS handling in cifs_get_file_info (Pavel Shilovsky)
- cris: fix a build error in drivers/tty/serial/crisv10.c (WANG Cong)
- TTY: drop driver reference in tty_open fail path (Jiri Slaby)
- TTY: make tty_add_file non-failing (Jiri Slaby)
- TTY: pty, release tty in all ptmx_open fail paths (Jiri Slaby)
Wylder)
- USB: for usb_autopm_get_interface_async -EINPROGRESS is not an error (Jim
- staging: serqt_usb2: remove ssu100 from supported devices (Bill Pemberton)
Consul)
- staging: quatech_usb2: Potential lost wakeup scenario in TIOCMIWAIT (Kautuk
- Staging: hv: Add support for >2 TB LUN in storage driver. (Mike Sterling)
Hartmann)
- USB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000 (Richard
Hamisch)
- USB: qcserial: add device ID for "HP un2430 Mobile Broadband Module" (Rigbert
- serial: pxa: work around for errata #20 (Marcus Folkesson)
(Ning Jiang)
- serial-core: power up uart port early before we do set_termios when resuming
- EHCI : introduce a common ehci_setup (Matthieu CASTET)
- USB: fix ehci alignment error (Harro Haan)
- EHCI: workaround for MosChip controller bug (Alan Stern)
- xhci-mem.c: Check for ring->first_seg != NULL (Kautuk Consul)
- xHCI: AMD isoc link TRB chain bit quirk (Andiry Xu)
Packard)
- drm/i915: Wrap DP EDID fetch functions to enable eDP panel power (Keith
(Takashi Iwai)
- drm/i915/panel: Always record the backlight level again (but cleverly)
Deucher)
- drm/radeon/kms: bail early in dvi_detect for digital only connectors (Alex
Deucher)
- drm/radeon/kms: handle !force case in connector detect more gracefully (Alex
- drm/radeon/kms: Fix I2C mask definitions (Jean Delvare)
- mmc: core: Fix hangs related to insert/remove of cards (Ulf Hansson)
- mmc: core: ext_csd.raw_* used in comparison but never set (Andrei Warkentin)
1180:e823 (Josh Boyer)
- PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh
- megaraid_sas: Fix instance access in megasas_reset_timer (Adam Radford)
- ipr: Always initiate hard reset in kdump kernel (Anton Blanchard)
- libsas: set sas_address and device type of rphy (Jack Wang)
- isci: fix support for large smp requests (Dan Williams)
- isci: fix missed unlock in apc_agent_timeout() (Jeff Skirvin)
- ALSA: hda - Remove bad code for IDT 92HD83 family patch (Charles Chin)
- ALSA: HDA: Add new revision for ALC662 (David Henningsson)
(Nicholas Bellinger)
- target: Fix REPORT TARGET PORT GROUPS handling with small allocation length
Steiner)
- x86: uv2: Workaround for UV2 Hub bug (system global address format) (Jack
- x86: Fix compilation bug in kprobes' twobyte_is_boostable (Josh Stone)
- epoll: fix spurious lockdep warnings (Nelson Elhage)
Ospite)
- leds: save the delay values after a successful call to blink_set() (Antonio
- leds: turn the blink_timer off before starting to blink (Antonio Ospite)
- usbmon vs. tcpdump: fix dropped packet count (Johannes Stezenbach)
- USB: storage: Use normalized sense when emulating autosense (Luben Tuikov)
- USB: Fix runtime wakeup on OHCI (Matthew Garrett)
- USB: g_printer: fix bug in unregistration (Fabian Godehardt)
- usb/core/devio.c: Check for printer class specific request (Matthias Dellweg)
Hallyn)
- USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid (Serge
- usb: cdc-acm: Owen SI-30 support (Denis Pershin)
- USB: add RESET_RESUME for webcams shown to be quirky (Oliver Neukum)
- USB: add quirk for Logitech C300 web cam (Jon Levell)
- USB: pl2303: add id for SMART device (Eric Benoit)
- USB: ftdi_sio: add PID for Sony Ericsson Urban (Hakan Kvist)
Stuge)
- USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board (Peter
- USB: option: convert interface blacklisting to bitfields (Dan Williams)
blacklist (Dan Williams)
- USB: option: convert Huawei K3765, K4505, K4605 reservered interface to
- USB: option: add ZTE product 0x0037 to sendsetup blacklist (Dan Williams)
Williams)
- USB: option: add various ZTE device network interfaces to the blacklist (Dan
- MAINTANERS: update Qualcomm Atheros addresses (Luis R. Rodriguez)
- ath9k_hw: Fix descriptor status of TxOpExceeded (Rajkumar Manoharan)
- ath9k_hw: Fix magnitude/phase coeff correction (Rajkumar Manoharan)
- ath9k_htc: add AVM FRITZ!WLAN 11N v2 support (Luis R. Rodriguez)
- ath9k_hw: Fix number of GPIO pins for AR9287/9300 (Mohammed Shafi Shajakhan)
- ath9k: disable unnecessary PHY error reporting (Felix Fietkau)
- HID: ACRUX - fix enabling force feedback support (Sergei Kolzun)
- QE/FHCI: fixed the CONTROL bug (Jerry Huang)
- Update email address for stable patch submission (Josh Boyer)
- kobj_uevent: Ignore if some listeners cannot handle message (Milan Broz)
- caif: Fix BUG() with network namespaces (David Woodhouse)
(Stefan Beller)
- platform: samsung_laptop: add dmi information for Samsung R700 laptops
- Platform: samsung_laptop: add support for X520 machines. (Tommaso Massimi)
- Platform: samsung_laptop: samsung backlight for R528/R728 (Smelov Andrey)
Stubbs)
- platform: samsung_laptop: fix samsung brightness min/max calculations (Jason
- Platform: Fix error path in samsung-laptop init (David Herrmann)
- kmod: prevent kmod_loop_msg overflow in __request_module() (Jiri Kosina)
syncing" (Trond Myklebust)
- Revert "NFS: Ensure that writeback_single_inode() calls write_inode() when
Layton)
- nfs: don't redirty inode when ncommit == 0 in nfs_commit_unstable_pages (Jeff
chipsets(v2) (Ming Lei)
- ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge
dev_change_net_namespaces (Eric W. Biederman)
- rtnetlink: Add missing manual netlink notification in
- dp83640: free packet queues on remove (Richard Cochran)
- mac80211: fix offchannel TX cookie matching (Johannes Berg)
- net: hold sock reference while processing tx timestamps (Richard Cochran)
- wl12xx: fix forced passive scans (Luciano Coelho)
- time: Change jiffies_to_clock_t() argument type to unsigned long (hank)
(NeilBrown)
- md/raid5: fix bug that could result in reads from a failed device.
- perf probe: Fix to show correct error string (Masami Hiramatsu)
Rostedt)
- tracing: Fix returning of duplicate data after EOF in trace_pipe_raw (Steven
- genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier (Ian Campbell)
- nfs: don't try to migrate pages with active requests (Jeff Layton)
- nfsd4: Remove check for a 32-bit cookie in nfsd4_readdir() (Bernd Schubert)
- nfsd4: stop using nfserr_resource for transitory errors (J. Bruce Fields)
- nfsd4: fix seqid_mutating_error (J. Bruce Fields)
- nfsd4: permit read opens of executable-only files (J. Bruce Fields)
- nfsd4: fix open downgrade, again (J. Bruce Fields)
- nfsd4: ignore WANT bits in open downgrade (J. Bruce Fields)
- hppfs: missing include (Al Viro)
- vfs: add "device" tag to /proc/self/mountstats (Bryan Schumaker)
- io-mapping: ensure io_mapping_map_atomic _is_ atomic (Daniel Vetter)
- ASoC: wm8940: Properly set codec->dapm.bias_level (Axel Lin)
- ASoC: wm8741: Fix setting interface format for DSP modes (Axel Lin)
- ASoC: ak4642: fixup cache register table (Kuninori Morimoto)
- ASoC: ak4535: fixup cache register table (Axel Lin)
- ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture (Axel Lin)
- ASoC: Remove direct register cache accesses from WM8962 driver (Mark Brown)
- ASoC: Fix a bug in WM8962 DSP_A and DSP_B settings (Susan Gao)
- KVM: s390: check cpu_id prior to using it (Carsten Otte)
- user per registers vs. ptrace single stepping (Martin Schwidefsky)
- memory leak with RCU_TABLE_FREE (Martin Schwidefsky)
- ccwgroup: move attributes to attribute group (Sebastian Ott)
- WMI: properly cleanup devices to avoid crashes (Dmitry Torokhov)
- iommu/amd: Fix wrong shift direction (Joerg Roedel)
- carminefb: Fix module parameters permissions (Jean Delvare)
Krzesinski)
- fb: avoid possible deadlock caused by fb_set_suspend (Herton Ronaldo
(Bruno Prémont)
- fb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock()
Schandinat)
- viafb: use display information in info not in var for panning (Florian Tobias
- viafb: improve pitch handling (Florian Tobias Schandinat)
Lei)
- uvcvideo: Set alternate setting 0 on resume if the bus has been reset (Ming
- DiBcom: protect the I2C bufer access (Patrick Boettcher)
- dib0700: protect the dib0700 buffer access (Olivier Grenie)
(Mauro Carvalho Chehab)
- tuner_xc2028: Allow selection of the frequency adjustment code for XC3028
- /proc/self/numa_maps: restore "huge" tag for hugetlb vmas (Andrew Morton)
(Paul Fertser)
- plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
- ARM: mach-ux500: unlock I&D l2x0 caches before init (Linus Walleij)
Hayasaka)
- mm: avoid null pointer access in vm_struct via /proc/vmallocinfo (Mitsuo
- ALSA: hda - Fix ADC input-amp handling for Cx20549 codec (Takashi Iwai)
- um: fix ubd cow size (Richard Weinberger)
(Andy Whitcroft)
- readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
- VFS: Fix automount for negative autofs dentries (David Howells)
- vfs: automount should ignore LOOKUP_FOLLOW (Miklos Szeredi)
- VFS: Fix the remaining automounter semantics regressions (Trond Myklebust)
- vfs pathname lookup: Add LOOKUP_AUTOMOUNT flag (Linus Torvalds)
- ptrace: don't clear GROUP_STOP_SIGMASK on double-stop (Oleg Nesterov)
- jsm: remove buggy write queue (Thadeu Lima de Souza Cascardo)
(Mitsuo Hayasaka)
- bonding: use local function pointer of bond->recv_probe in bond_handle_frame
- bridge: fix hang on removal of bridge via netlink (stephen hemminger)
- can bcm: fix tx_setup off-by-one errors (Oliver Hartkopp)
- ipv4: fix ipsec forward performance regression (Yan, Zheng)
- l2tp: fix a potential skb leak in l2tp_xmit_skb() (Eric Dumazet)
Ward)
- macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode (David
- netconsole: enable netconsole can make net_device refcnt incorrent (Gao feng)
- tcp: properly handle md5sig_pool references (Yan, Zheng)
- tcp: properly update lost_cnt_hint during shifting (Yan, Zheng)
- tg3: negate USE_PHYLIB flag check (Jiri Pirko)
Zheng)
- ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket (Yan,
ring (Willem de Bruijn)
- make PACKET_STATISTICS getsockopt report consistently between ring and non-
Vrabel)
- net: xen-netback: correctly restart Tx after a VM restore/migrate (David
- mm: thp: tail page refcounting fix (Andrea Arcangeli)
- binfmt_elf: fix PIE execution with randomization disabled (Jiri Kosina)
Torvalds)
- vfs: show O_CLOEXE bit properly in /proc/<pid>/fdinfo/<fd> files (Linus
- iwlagn: do not use interruptible waits (Johannes Berg)
Bounine)
- drivers/net/rionet.c: fix ethernet address macros for LE platforms (Alexandre
- hwspinlock/core: use a mutex to protect the radix tree (Juan Gutierrez)
(Clifton Barnes)
- drivers/power/ds2780_battery.c: create central point for calling w1 interface
(Clifton Barnes)
- drivers/power/ds2780_battery.c: add a nolock function to w1 interface
(Clifton Barnes)
- drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
(Theodore Ts'o)
- ext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes
Wong)
- ext4: ext4_rename should dirty dir_bh with the correct directory (Darrick J.
(Darrick J. Wong)
- ext4: ext4_mkdir should dirty dir_block with newly created directory inode
(Theodore Ts'o)
- ext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry
- ext4: fix race in xattr block allocation path (Eric Sandeen)
(Vasanthy Kolluri)
- enic: Bug Fix: Fix hardware transmit queue indexing in enic_poll_controller
li)
- rtl8150: rtl8150_disconnect(...) does not need tasklet_disable(...) (huajun
- USB: EHCI: Fix test mode sequence (Boris Todorov)
(Arvid Brodin)
- usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlink
- USB: Serial: Add device ID for Sierra Wireless MC8305 (Florian Echtler)
(Artur Zimmer)
- USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device
- usbnet/cdc_ncm: Don't use stack variables for DMA (Josh Boyer)
- USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. (Sarah Sharp)
- ipheth: iPhone 4 Verizon CDMA USB Product ID add (Kavan Smith)
- USB: xHCI: prevent infinite loop when processing MSE event (Andiry Xu)
- ASIX: Simplify condition in rx_fixup() (Marek Vasut)
- ASIX: Use only 11 bits of header for data size (Marek Vasut)
- Bluetooth: Add MacBookAir4,1 support (Pieter-Augustijn Van Malleghem)
- Bluetooth: Add Toshiba laptops AR30XX device ID (Ricardo Mendoza)
- Bluetooth: Add Atheros AR3012 one PID/VID supported (Steven.Li)
- Bluetooth: add support for 2011 mac mini (Jurgen Kramer)
- btusb: add device entry for Broadcom SoftSailing (Oliver Neukum)
- usb_storage: Don't freeze in usb-stor-scan (Seth Forshee)
- xhci: If no endpoints changed, don't issue BW command. (Sarah Sharp)
- xHCI: test and clear RWC bit (Andiry Xu)
- xHCI: Clear PLC for USB2 root hub ports (Andiry Xu)
- can bcm: fix incomplete tx_setup fix (Oliver Hartkopp)
Arcangeli)
- powerpc: remove superfluous PageTail checks on the pte gup_fast (Andrea
- powerpc: get_hugepte() don't put_page() the wrong page (Andrea Arcangeli)
Arcangeli)
- powerpc: gup_hugepte() avoid freeing the head page too many times (Andrea
- powerpc: gup_hugepte() support THP based tail recounting (Andrea Arcangeli)
- powerpc: gup_huge_pmd() return 0 if pte changes (Andrea Arcangeli)
- s390: gup_huge_pmd() support THP tail recounting (Andrea Arcangeli)
- s390: gup_huge_pmd() return 0 if pte changes (Andrea Arcangeli)
- thp: share get_huge_page_tail() (Andrea Arcangeli)
- bridge: leave carrier on for empty bridge (stephen hemminger)
- net: Unlock sock before calling sk_free() (Thomas Gleixner)
- ALSA: ua101: fix crash when unplugging (Clemens Ladisch)
(Charles Chin)
- ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default
- ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs (Charles Chin)
- ALSA: hda/realtek - Skip invalid digital out pins (Takashi Iwai)
(Jerome Glisse)
- drm/radeon: avoid bouncing connector status btw disconnected & unknown
- drm/radeon/kms: split MSI check into a separate function (Alex Deucher)
- drm/radeon/kms: Add MSI quirk for HP RS690 (Alex Deucher)
Glisse)
- drm/radeon: set hpd polarity at init time so hotplug detect works (Jerome
- drm/radeon/kms: properly set panel mode for eDP (Alex Deucher)
- drm/radeon/kms: Add MSI quirk for Dell RS690 (Alex Deucher)
- drm/radeon/kms: add MSI module parameter (Alex Deucher)
- drm/radeon/kms: set HPD polarity in hpd_init() (Alex Deucher)
- kbuild: Fix help text not displayed in choice option. (Srinivas Kandagatla)
- PM / Runtime: Automatically retry failed autosuspends (Alan Stern)
- USB: Update last_busy time after autosuspend fails (Alan Stern)
(Mike Miller)
- cciss: add small delay when using PCI Power Management to reset for kump
- hwmon: (coretemp) Fix for non-SMP builds (Jean Delvare)
Delvare)
- hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types (Jean
- hwmon: (w83627ehf) Fix broken driver init (Guenter Roeck)
(Nicholas Bellinger)
- tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB
- st: fix race in st_scsi_execute_end (Petr Uzel)
- scsi_dh: check queuedata pointer before proceeding further (Moger, Babu)
- Make scsi_free_queue() kill pending SCSI commands (Bart Van Assche)
- Fix block queue and elevator memory leak in scsi_alloc_sdev (Anton Blanchard)
(nagalakshmi.nandigama)
- mpt2sas: Fix for system hang when discovery in progress
(Axel Lin)
- ASoC: wm8711: Fix wrong mask for setting input audio data bit length select
wm8711_set_dai_fmt (Axel Lin)
- ASoC: Leave input audio data bit length settings untouched in
- ASoC: WM8904: Set `invert' bit for Capture Switch (Hong Xu)
- ASoC: Ensure WM8962 PLL registers are reset (Mark Brown)
- ASoC: Ensure the WM8962 oscillator and PLLs start up disabled (Mark Brown)
- NFS/sunrpc: don't use a credential with extra groups. (NeilBrown)
- block: make gendisk hold a reference to its queue (Tejun Heo)
- VFS: fix statfs() automounter semantics regression (Dan McGee)
Miller)
- hpsa: add small delay when using PCI Power Management to reset for kump (Mike
- VFS: we need to set LOOKUP_JUMPED on mountpoint crossing (Al Viro)
Blanchard)
- powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nid (Anton
(Anton Blanchard)
- powerpc: Fix oops when echoing bad values to /sys/devices/system/memory/probe
Blanchard)
- powerpc/pseries: Avoid spurious error during hotplug CPU add (Anton
- powerpc/eeh: Fix /proc/ppc64/eeh creation (Thadeu Lima de Souza Cascardo)
- powerpc: Fix deadlock in icswx code (Anton Blanchard)
Luck)
- ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() (Tony
- netlink: validate NLA_MSECS length (Johannes Berg)
Manoharan)
- ath9k_hw: Update AR9485 initvals to fix system hang issue (Rajkumar
- mac80211: fix remain_off_channel regression (Eliad Peller)
- mac80211: config hw when going back on-channel (Eliad Peller)
- mac80211: disable powersave for broken APs (Johannes Berg)
- mtd: mtdchar: add missing initializer on raw write (Peter Wippich)
- mtd: provide an alias for the redboot module name (Andres Salomon)
- mtd: pxa3xx_nand: fix nand detection issue (Lei Wen)
- mtd: pxa3xx_nand: Fix blank page ECC mismatch (Daniel Mack)
(Jiaying Zhang)
- ext4: remove i_mutex lock in ext4_evict_inode to fix lockdep complaining
- net: Align AF-specific flowi structs to long (David Ward)
(dpward)
- net: Handle different key sizes between address families in flow cache
- PM / Suspend: Off by one in pm_suspend() (Dan Carpenter)
- crypto: cryptd - Use subsys_initcall to prevent races with aesni (Herbert Xu)
Cochran)
- dp83640: use proper function to free transmit time stamping packets (Richard
Manoharan)
- ath9k_hw: Fix regression of register offset for AR9003 chips (Rajkumar
Adam (Adam))
- mtd: nand_base: always initialise oob_poi before writing OOB data (THOMSON,
- HID: add support for new revision of Apple aluminum keyboard (Dan Bastone)
- HID: add support for HuiJia USB Gamepad connector (Clemens Werther)
- HID: add support for MacBookAir4,2 keyboard. (Joshua V. Dillon)
- HID: hid-multitouch: Add LG Display Multitouch device. (Jeff Brown)
- HID: add MacBookAir4,2 to hid_have_special_driver[] (Jiri Kosina)
- HID: Add support MacbookAir 4,1 keyboard (Nobuhiro Iwamatsu)
- HID: Add device IDs for Macbook Pro 8 keyboards (Gökçen Eraslan)
- HID: hid-apple: add device ID of another wireless aluminium (Andreas Krist)
- HID: consolidate MacbookAir 4,1 mappings (Jiri Kosina)
translations (Linus Torvalds)
- hid/apple: modern macbook airs use the standard apple function key
Iwai)
- ALSA: hda - Don't add elements of other codecs to vmaster slave (Takashi
- virtio-pci: fix use after free (Michael S. Tsirkin)
Brown)
- ASoC: Don't use wm8994->control_data in wm8994_readable_register() (Mark
- sh: Fix cached/uncaced address calculation in 29bit mode (Nobuhiro Iwamatsu)
Anholt)
- drm/i915: Fix object refcount leak on mmappable size limit error path. (Eric
- drm/nouveau: initialize chan->fence.lock before use (Marcin Slusarz)
- drm/radeon/kms: make an aux failure debug only (Alex Deucher)
Iwai)
- ALSA: usb-audio - Check the dB-range validity in the later read, too (Takashi
Iwai)
- ALSA: usb-audio - Fix the missing volume quirks at delayed init (Takashi
- KEYS: Fix a NULL pointer deref in the user-defined key type (David Howells)
- hfs: add sanity check for file name length (Dan Carpenter)
(Johan Hovold)
- Revert "leds: save the delay values after a successful call to blink_set()"
- drm/radeon: add some missing FireMV pci ids (Alex Deucher)
(Jesse Barnes)
- drm/i915: enable ring freq scaling, RC6 and graphics turbo on Ivy Bridge v3
- sfi: table irq 0xFF means 'no interrupt' (Kirill A. Shutemov)
- x86, mrst: use a temporary variable for SFI irq (Mika Westerberg)
- b43: refuse to load unsupported firmware (Rafał Miłecki)
- md/raid5: abort any pending parity operations when array fails. (NeilBrown)
- mfd: Fix twl4030 dependencies for audio codec (Thomas Weber)
- powerpc/ps3: Fix lost SMP IPIs (Geoff Levand)
- powerpc: Copy down exception vectors after feature fixups (Anton Blanchard)
- backing-dev: ensure wakeup_timer is deleted (Rabin Vincent)
Hutchings)
- block: Always check length of all iov entries in blk_rq_map_user_iov() (Ben
- genirq: Fix irqfixup, irqpoll regression (Edward Donovan)
- fix WARNING: at drivers/scsi/scsi_lib.c:1704 (James Bottomley)
- hpsa: Disable ASPM (Matthew Garrett)
Averin)
- aacraid: controller hangs if kernel uses non-default ASPM policy (Vasily
- saa7164: Add support for another HVR2200 hardware revision (Tony Jago)
- drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend (Adam Jackson)
Marinas)
- ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors (Catalin
- Net, libertas: Resolve memory leak in if_spi_host_to_card() (Jesper Juhl)
Wingerde)
- rt2x00: Fix sleep-while-atomic bug in powersaving code. (Gertjan van
- mac80211: fix NULL dereference in radiotap code (Johannes Berg)
- mac80211: fix bug in ieee80211_build_probe_req (Johannes Berg)
- nl80211: fix HT capability attribute validation (Johannes Berg)
Rodriguez)
- cfg80211: fix bug on regulatory core exit on access to last_request (Luis R.
- ip6_tunnel: copy parms.name after register_netdevice (Josh Boyer)
- PM / driver core: disable device's runtime PM during shutdown (Peter Chen)
- pch_phub: Support new device LAPIS Semiconductor ML7831 IOH (Tomoya MORINAGA)
- pch_phub: Fix MAC address writing issue for LAPIS ML7831 (Tomoya MORINAGA)
- pch_uart: Fix hw-flow control issue (Tomoya MORINAGA)
- pch_uart: Fix DMA resource leak issue (Tomoya MORINAGA)
- pch_uart: Support new device LAPIS Semiconductor ML7831 IOH (Tomoya MORINAGA)
- tty: hvc_dcc: Fix duplicate character inputs (Stephen Boyd)
- TTY: ldisc, allow waiting for ldisc arbitrarily long (Jiri Slaby)
- TTY: ldisc, move wait idle to caller (Jiri Slaby)
- TTY: ldisc, wait for ldisc infinitely in hangup (Jiri Slaby)
(Jeff Layton)
- nfs: when attempting to open a directory, fall back on normal lookup (try #5)
- pcie-gadget-spear: Add "platform:" prefix for platform modalias (Axel Lin)
(Claudio Scordino)
- drivers/base/node.c: fix compilation error with older versions of gcc
- xhci: Set slot and ep0 flags for address command. (Sarah Sharp)
- usb, xhci: Clear warm reset change event during init (Don Zickus)
- usb, xhci: fix lockdep warning on endpoint timeout (Don Zickus)
- USB: XHCI: resume root hubs when the controller resumes (Alan Stern)
- USB: option: release new PID for ZTE 3G modem (zheng.zhijian)
- USB: option: add PID of Huawei E173s 3G modem (Ferenc Wagner)
- USB: serial: pl2303: rm duplicate id (wangyanqing)
- USB: cdc-acm: Fix disconnect() vs close() race (Havard Skinnemoen)
- USB: workaround for bug in old version of GCC (Alan Stern)
- USB: ark3116 initialisation fix (Bart Hartgers)
- USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c (Andrew Worsley)
- usb-storage: Accept 8020i-protocol commands longer than 12 bytes (Alan Stern)
- USB: EHCI: fix HUB TT scheduling issue with iso transfer (Thomas Poussevin)
- USB: add quirk for Logitech C600 web cam (Josh Boyer)
- USB: quirks: adding more quirky webcams to avoid squeaky audio (sordna)
- xfs: fix error handling for synchronous writes (Christoph Hellwig)
- xfs: fix xfs_mark_inode_dirty during umount (Christoph Hellwig)
- xfs: dont serialise direct IO reads on page cache (Dave Chinner)
- xfs: avoid direct I/O write vs buffered I/O race (Christoph Hellwig)
- xfs: Return -EIO when xfs_vn_getattr() failed (Mitsuo Hayasaka)
- xfs: fix buffer flushing during unmount (Christoph Hellwig)
- xfs: Fix possible memory corruption in xfs_readlink (Carlos Maiolino)
- xfs: use doalloc flag in xfs_qm_dqattach_one() (Mitsuo Hayasaka)
- xfs: fix ->write_inode return values (Christoph Hellwig)
- drm/i915: fix IVB cursor support (Jesse Barnes)
- drm/i915: always set FDI composite sync bit (Jesse Barnes)
Kroah-Hartman)
- Revert "USB: EHCI: fix HUB TT scheduling issue with iso transfer" (Greg
supported on the card (Somnath Kotur)
- be2net: Fallback to the older opcode if MCC_CREATE_EXT opcode is not
- be2net: Fix Rx pause counter for lancer (Selvin Xavier)
- be2net: Enable NETIF_F_TSO6 for VLAN traffic for BE (Padmanabh Ratnakar)
- be2net: support multiple TX queues (Sathya Perla)
- be2net: fix netdev_stats_update (Sathya Perla)
- be2net: get rid of multi_rxq module param (Sathya Perla)
- be2net: fix initialization of vlan_prio_bmap (Sathya Perla)
- be2net: fix certain cmd failure logging (Sathya Perla)
- be2net: create/destroy rx-queues on interface open/close (Sathya Perla)
- be2net: clear intr bit in be_probe() (Sathya Perla)
- benet: Add missing comma between constant string array (Joe Perches)
- be2net: account for skb allocation failures (Eric Dumazet)
- be2net: move to new vlan model (Ajit Khaparde)
- be2net: request native mode each time the card is reset (Sathya Perla)
- be2net: cleanup and refactor stats code (Sathya Perla)
- be2net: use stats-sync to read/write 64-bit stats (Sathya Perla)
Perla)
- be2net: remove wrong and unnecessary calls to netif_carrier_off() (Sathya
- be2net: no need to query link status (Sathya Perla)
- be2net: non-member vlan pkts not received in promiscous mode (Sathya Perla)
- be2net: use RX_FILTER cmd to program multicast addresses (Sathya Perla)
- be2net: add support for flashing Teranetics PHY firmware (Sathya Perla)
- be2net: drop pkts that do not belong to the port (Sathya Perla)
- be2net: fix cmd-rx-filter not notifying MCC (Sathya Perla)
- benet: fix build error on 32bit arch (Eric Dumazet)
vlan_tag (Somnath Kotur)
- be2net: Storing the 'vid' got by the grp5 event instead of storing the
- be2net: Fix race in posting rx buffers. (Sathya Perla)
- be2net: get rid of memory mapped pci-cfg space address (Sathya Perla)
- be2net: fix erx->rx_drops_no_frags wrap around (Sathya Perla)
- be2net: increase FW update completion timeout (Sathya Perla)
- be2net: remove unused variable (Sathya Perla)
- benet: remove bogus "unlikely" on vlan check (Jiri Pirko)
- be2net: fix multicast filter programming (Sathya Perla)
- be2net: Show newly flashed FW ver in ethtool (Sathya Perla)
(Somnath Kotur)
- be2net: Add 60 second delay to allow FAT dump completion on recovery from EEH
Kotur)
- be2net: Change the data type of the 'on die temperature' stat. (Somnath
retrieving FAT data (Somnath Kotur)
- be2net: Fixed Endianness issues in the response read log length field while
- be2net: Modified PCI MaxReadReq size to 4096 bytes (Somnath Kotur)
- be2net: Making die temperature ioctl call async (Somnath Kotur)
- be2net: fix truesize errors (Eric Dumazet)
- be2net: add vlan/rx-mode/flow-control config to be_setup() (Sathya Perla)
Perla)
- be2net: refactor VF setup/teardown code into be_vf_setup/clear() (Sathya
- be2net: don't create multiple TXQs in BE2 (Sathya Perla)
Perla)
- be2net: don't create multiple RX/TX rings in multi channel mode (Sathya
- be2net: Refactored be_cmds.c file. (Somnath Kotur)
- be2net: Changing MAC Address of a VF was broken. (Somnath Kotur)
- be2net: Fix endian issue in RX filter command (Padmanabh Ratnakar)
- be2net: Fix disabling multicast promiscous mode (Padmanabh Ratnakar)
- be2net: Prevent CQ full condition for Lancer (Padmanabh Ratnakar)
- be2net: Add detect UE feature for Lancer (Padmanabh Ratnakar)
Perla)
- be2net: init (vf)_if_handle/vf_pmac_id to handle failure scenarios (Sathya
- be2net: stop checking the UE registers after an EEH error (Sathya Perla)
Perla)
- be2net: don't log more than one error on detecting EEH/UE errors (Sathya
- be2net: stop issuing FW cmds if any cmd times out (Sathya Perla)
- be2net: Fix TX queue create for Lancer (Padmanabh Ratnakar)
- be2net: add register dump feature for Lancer (Padmanabh Ratnakar)
- be2net: Add EEPROM dump feature for Lancer (Padmanabh Ratnakar)
- be2net: Fix VLAN promiscous mode for Lancer (Padmanabh Ratnakar)
- be2net: Use V1 query link status command for lancer (Padmanabh Ratnakar)
- be2net: Move to new SR-IOV implementation in Lancer (Padmanabh Ratnakar)
- be2net: Fix error recovery paths (Padmanabh Ratnakar)
- be2net: Add error handling for Lancer (Padmanabh Ratnakar)
- be2net: Use new hash key (Padmanabh Ratnakar)
- be2net: Fix non utilization of RX queues (Padmanabh Ratnakar)
- be2net: Changed version number to 4.1.297o (Somnath Kotur)
- Enable BG by default (Maxim Uvarov)
Uvarov)
- Fixed compiler warning for putting large amount of memory on stack (Maxim
- Fixed mailbox double free panic (Maxim Uvarov)
Uvarov)
- Merge from upstream: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning (Maxim
together (Konrad Rzeszutek Wilk)
- xen/blk[front|back]: Squash blkif_request_rw and blkif_request_discard
(Konrad Rzeszutek Wilk)
- xen/blk[front|back]: Enhance discard support with secure erasing support.
(Konrad Rzeszutek Wilk)
- xen/blkback: Move processing of BLKIF_OP_DISCARD from dispatch_rw_block_io
Dongyang)
- xen-blkback: convert hole punching to discard request on loop devices (Li
Vrabel)
- block: xen-blkback: use API provided by xenbus module to map rings (David
Vrabel)
- xen: use generic functions instead of xen_{alloc, free}_vm_area() (David
Vrabel)
- block: xen-blkback: use API provided by xenbus module to map rings (David
Vrabel)
- net: xen-netback: use API provided by xenbus module to map rings (David
Vrabel)
- xen: map foreign pages for shared rings by updating the PTEs directly (David
- xen/pm_idle: Make pm_idle be default_idle under Xen. (Konrad Rzeszutek Wilk)
(Konrad Rzeszutek Wilk)
- x86/cpa: Use pte_attrs instead of pte_flags on CPA/set_p.._wb/wc operations.
Rzeszutek Wilk)
- x86/paravirt: Use pte_val instead of pte_flags on CPA pageattr_test (Konrad
XenbusStateClosed. (Joe Jin)
- xen-blkback: Don't disconnect backend until state switched to
- xen/acpi: Domain0 acpi parser related platform hypercall (Yu Ke)
- ACPI: processor: export necessary interfaces (Kevin Tian)
(Kevin Tian)
- ACPI: processor: Don't setup cpu idle handler when we do not want them.
- ACPI: processor: cache acpi_power_register in cx structure (Kevin Tian)
Liang)
- ACPI: processor: add __acpi_processor_[un]register_driver helpers. (Tang
- ACPI: add processor driver for Xen virtual CPUs. (Kevin Tian)
for Xen vcpu (Tang Liang)
- ACPI: processor: override the interface of register acpi processor handler
- ACPI: xen processor: add PM notification interfaces. (Kevin Tian)
Tian)
- ACPI: xen processor: set ignore_ppc to handle PPC event for Xen vcpu. (Kevin
Rzeszutek Wilk)
- Revert "xen/pm_idle: Make pm_idle be default_idle under Xen." (Konrad
- AIO: Don't plug the I/O queue in do_io_submit() (Dave Kleikamp)
- mlx4: use pci_dev->revision (Sergei Shtylyov)
- mlx4_core: Extend capability flags to 64 bits (Or Gerlitz)
- mlx4_core: Read extended capabilities into the flags field (Or Gerlitz)
- mlx4: do vlan cleanup (Jiri Pirko)
- mlx4: Fixing Ethernet unicast packet steering (Yevgeny Petrilin)
- mlx4: decreasing ref count when removing mac (Yevgeny Petrilin)
- mlx4_core: Clean up error flow in mlx4_register_mac() (Roland Dreier)
- mlx4_en: Assigning TX irq per ring (Joe Jin)
- mlx4_en: Removing reserve vectors (Joe Jin)
- mlx4_en: Adjusting moderation per each ring (Joe Jin)
- mlx4_en: Added missing iounmap upon releasing a device (Joe Jin)
- mlx4_en: Fix QP number calculation according to module param (Joe Jin)
- mlx4_en: Fix crash upon device initialization error (Joe Jin)
- mlx4_en: Adding 40gb speed report for ethtool (Joe Jin)
- mlx4: Fix vlan table overflow (Joe Jin)
- mlx4_en: Controlling FCS header removal (Joe Jin)
- mlx4_en: Checksum counters per ring (Joe Jin)
- mlx4_en: Recording rx queue for gro packets (Joe Jin)
- mlx4_en: Adding rxhash support (Joe Jin)
- mlx4_en: Updating driver version (Joe Jin)
- mlx4_en: fix skb truesize underestimation (Joe Jin)
- mlx4_en: Remove FCS bytes from packet length. (Joe Jin)
- mlx4_en: using non collapsed CQ on TX (Joe Jin)
Jin)
- mlx4_en: fix WOL handlers were always looking at port2 capability bit (Joe
- mlx4_en: adding loopback support (Joe Jin)
- netxen: Upgrade netxen_nic driver to v4.0.77 (Joe Jin)
- [firmware] radeon: Add License for raedon firmware files (Joe Jin)
hanged. (Konrad Rzeszutek Wilk)
- xen: Enable CONFIG_XEN_WDT so that we can reboot the box in case the dom0 is
Campbell)
- xen: only limit memory map to maximum reservation for domain 0. (Ian
Rzeszutek Wilk)
- xen/swiotlb: Use page alignment for early buffer allocation. (Konrad
- eCryptfs: Flush file in vma close (Tyler Hicks)
(Jeffrey (Sheng-Hui) Chu)
- i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
- eCryptfs: Extend array bounds for all filename chars (Tyler Hicks)
- crypto: mv_cesa - fix hashing of chunks > 1920 bytes (Phil Sutter)
- drm: integer overflow in drm_mode_dirtyfb_ioctl() (Xi Wang)
- drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real (Alex Deucher)
- drm/i915: Ivybridge still has fences! (Daniel Vetter)
Anholt)
- drm/i915: Turn on a required 3D clock gating bit on Sandybridge. (Eric
- drm/i915: Turn on another required clock gating bit on gen6. (Eric Anholt)
Skeggs)
- drm/ttm: request zeroed system memory pages for new TT buffer objects (Ben
- drm/i915: fix CB tuning check for ILK+ (Jesse Barnes)
Helgaas)
- PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs (Bjorn
- drm/radeon/kms: fix up gpio i2c mask bits for r4xx (Alex Deucher)
- viafb: correct sync polarity for OLPC DCON (Daniel Drake)
- ARM: pxa: fix inconsistent CONFIG_USB_PXA27X (Haojian Zhuang)
- arm: mx28: fix bit operation in clock setting (Wolfram Sang)
- ARM: OMAP: smartreflex: fix IRQ handling bug (Felipe Balbi)
- ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined (Ming Lei)
- ARM: 7161/1: errata: no automatic store buffer drain (Will Deacon)
- ALSA: lx6464es - fix device communication via command bus (Tim Blechmann)
- ASoC: fsl_ssi: properly initialize the sysfs attribute object (Timur Tabi)
- ASoC: wm8753: Skip noop reconfiguration of DAI mode (Timo Juhani Lindfors)
(Mark Brown)
- ASoC: Ensure WM8731 register cache is synced when resuming from disabled
Myklebust)
- SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared (Trond
- genirq: fix regression in irqfixup, irqpoll (Edward Donovan)
- cgroup_freezer: fix freezing groups with stopped tasks (Michal Hocko)
- timekeeping: add arch_offset hook to ktime_get functions (Hector Palacios)
- hrtimer: Fix extra wakeups from __remove_hrtimer() (Jeff Ohlstein)
- p54spi: Add missing spin_lock_init (Michael Büsch)
- p54spi: Fix workqueue deadlock (Michael Büsch)
- rt2x00: Fix efuse EEPROM reading on PPC32. (Gertjan van Wingerde)
- nl80211: fix MAC address validation (Eliad Peller)
- cfg80211: fix regulatory NULL dereference (Johannes Berg)
- mac80211: don't stop a single aggregation session twice (Johannes Berg)
Grumbach)
- mac80211: fix race between the AGG SM and the Tx data path (Emmanuel
- hwmon: (coretemp) Fix oops on driver load (Jean Delvare)
- revert "mfd: Fix twl4030 dependencies for audio codec" (Greg Kroah-Hartman)
- SCSI: Silencing 'killing requests for dead queue' (Hannes Reinecke)
- hugetlb: release pages in the error path of hugetlb_cow() (Hillf Danton)
- drm/radeon/kms: add some new pci ids (Alex Deucher)
- drm/radeon/kms: add some loop timeouts in pageflip code (Alex Deucher)
- firmware: Sigma: Prevent out of bounds memory access (Lars-Peter Clausen)
- firmware: Sigma: Skip header during CRC generation (Lars-Peter Clausen)
- firmware: Sigma: Fix endianess issues (Lars-Peter Clausen)
- staging: usbip: bugfix for deadlock (Bart Westgeest)
- staging: comedi: fix oops for USB DAQ devices. (Bernd Porr)
- Staging: comedi: fix mmap_count (Federico Vaga)
- Staging: comedi: fix signal handling in read and write (Federico Vaga)
- USB: whci-hcd: fix endian conversion in qset_clear() (Dan Carpenter)
- HID: Correct General touch PID (Benjamin Tissoires)
- usb: ftdi_sio: add PID for Propox ISPcable III (Marcin Kościelnicki)
- usb: option: add Huawei E353 controlling interfaces (Dirk Nehring)
- usb: option: add SIMCom SIM5218 (Veli-Pekka Peltola)
- USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 (Qinglin Ye)
- EHCI : Fix a regression in the ISO scheduler (Matthieu CASTET)
- xHCI: fix bug in xhci_clear_command_ring() (Andiry Xu)
- sched, x86: Avoid unnecessary overflow in sched_clock (Salman Qazi)
- x86/mpparse: Account for bus types other than ISA and PCI (Bjorn Helgaas)
- x86: Fix "Acer Aspire 1" reboot hang (Peter Chubb)
- perf/x86: Fix PEBS instruction unwind (Peter Zijlstra)
Richter)
- oprofile, x86: Fix crash when unloading module (nmi timer mode) (Robert
- add missing .set function for NT_S390_LAST_BREAK regset (Martin Schwidefsky)
- cfg80211: fix race on init and driver registration (Luis R. Rodriguez)
- cfg80211: amend regulatory NULL dereference fix (Luis R. Rodriguez)
- genirq: Fix race condition when stopping the irq thread (Ido Yariv)
Myklebust)
- NFS: Prevent 3.0 from crashing if it receives a partial layout (Trond
- xfs: validate acl count (Christoph Hellwig)
(Christoph Hellwig)
- xfs: force buffer writeback before blocking on the ilock in inode reclaim
- xfs: fix attr2 vs large data fork assert (Christoph Hellwig)
ftrace_event_call->filter (Tejun Heo)
- trace_events_filter: Use rcu_assign_pointer() when setting
- rtc: Disable the alarm in the hardware (Rabin Vincent)
- tracing: fix event_subsystem ref counting (Ilya Dryomov)
Gleixner)
- tick-broadcast: Stop active broadcast device when replacing it (Thomas
- perf: Fix parsing of __print_flags() in TP_printk() (Steven Rostedt)
Natapov)
- jump_label: jump_label_inc may return before the code is patched (Gleb
- oprofile: Fix crash when unloading module (hr timer mode) (Robert Richter)
(Joseph))
- clocksource: Fix bug with max_deferment margin calculation (Yang Honggang
Gleixner)
- clockevents: Set noop handler in clockevents_exchange_device() (Thomas
Christie)
- iscsi_boot_sysfs: have this module check for null on destruction (Mike
(Mike Christie)
- iscsi_ibft, be2iscsi, iscsi_boot: fix boot kobj data lifetime management
- block: add bsg helper library (Mike Christie)
- bsg-lib: add module.h include (Jens Axboe)
- iscsi_transport: add support for net settings (Mike Christie)
- qla4xxx: add support for set_net_config (Mike Christie)
- qla4xxx: Added new "struct ipaddress_config" (Vikas Chaudhary)
- iscsi class: add iface representation (Mike Christie)
- qla4xxx: added support to show multiple iface in sysfs (Vikas Chaudhary)
- iscsi cls: sysfs group is_visible callout for conn attrs (Mike Christie)
- iscsi class: sysfs group is_visible callout for session attrs (Mike Christie)
- iscsi class: remove iface param mask (Mike Christie)
Christie)
- iscsi class: sysfs group is_visible callout for iscsi host attrs (Mike
- iscsi class: expand vlan support (Mike Christie)
- qla4xxx: Add VLAN support (Vikas Chaudhary)
- iscsi class: add bsg support to iscsi class (Mike Christie)
- qla4xxx: add bsg support (Vikas Chaudhary)
offload session login. (Manish Rangankar)
- scsi_transport_iscsi: Add conn login, kernel to user, event to support
- qla4xxx: support iscsiadm session mgmt (Manish Rangankar)
Rangankar)
- qla4xxx: Remove reduandant code after open-iscsi integration. (Manish
- qla4xxx: Boot from SAN support for open-iscsi (Manish Rangankar)
- scsi_transport_iscsi: Added support to update mtu (Vikas Chaudhary)
- qla4xxx: Added support to update mtu (Vikas Chaudhary)
- qla4xxx: Code cleanup for read/update flash using BSG (Harish Zunjarrao)
- qla4xxx: Add get ACB state support using BSG (Harish Zunjarrao)
Zunjarrao)
- qla4xxx: Add read/update NVRAM support for 40xx adapters using BSG (Harish
- qla4xxx: Added vendor specific sysfs attributes (Vikas Chaudhary)
Chaudhary)
- scsi_transport_iscsi: Added support to update initiator iscsi port (Vikas
- qla4xxx: added support to update initiator iscsi port (Vikas Chaudhary)
- qla4xxx: Added restore factory defaults support using BSG (Harish Zunjarrao)
- qla4xxx: Added Get ACB support using BSG (Harish Zunjarrao)
- scsi: Added support for adapter and firmware reset (Vikas Chaudhary)
- qla4xxx: Added support for adapter and firmware reset (Vikas Chaudhary)
- qla4xxx: export iface name (Mike Christie)
- qla4xxx: Add new FLT firmware region (Nilesh Javali)
- qla4xxx: Fix bidirectional CHAP. (Lalit Chandivade)
- qla4xxx: Do not add duplicate CHAP entry in FLASH (Lalit Chandivade)
- qla4xxx: Fix exporting boot targets to sysfs (Lalit Chandivade)
- qla4xxx: Fix getting BIDI CHAP for boot targets (Lalit Chandivade)
- qla4xxx: Free Device Database (DDB) reserved by FW (Lalit Chandivade)
- qla4xxx: Clear DDB map index on the basis of AEN. (Manish Rangankar)
- qla4xxx: Fixed session destroy issue on link up-down. (Manish Rangankar)
- qla4xxx: Fixed device blocked issue on link up-down. (Manish Rangankar)
- qla4xxx: Fixed active session re-open issue. (Manish Rangankar)
- qla4xxx: Fixed target discovery failed issue. (Manish Rangankar)
- qla4xxx: updated device id check for BFS. (Manish Rangankar)
- qla4xxx: Update driver version to 5.02.00-k8 (Vikas Chaudhary)
- iscsi class: fix link local mispelling (Mike Christie)
- qla4xxx: fix data alignment and use nl helpers (Mike Christie)
- iscsi class: fix vlan configuration (Mike Christie)
Christie)
- qla4xxx: export address/port of connection (fix udev disk names) (Mike
- scsi: qla4xxx driver depends on NET (Randy Dunlap)
- qla4xxx: select iscsi boot sysfs attrs (Mike Christie)
- qla4xxx: Autologin persisted target entries. (Manish Rangankar)
- iscsi class: export pid of process that created session (Mike Christie)
- qla4xxx: Updated version to 5.02.00.00.06.02-uek0 (Lalit Chandivade)
- [SCSI] mpt2sas MPI next revision header update (Kashyap, Desai)
- [SCSI] mpt2sas: Set max_sector count from module parameter (Kashyap, Desai)
- [SCSI] mpt2sas: fix broadcast AEN and task management issue (Kashyap, Desai)
- [SCSI] mpt2sas: Bump version 09.100.00.00 (Kashyap, Desai)
entry in MPI message (Kashyap, Desai)
- [SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command
context (kashyap.desai)
- [SCSI] mpt2sas: Added missing mpt2sas_base_detach call from scsih_remove
- Remove unneeded version.h includes from drivers/scsi/ (Jesper Juhl)
support of the HBA (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Added NUNA IO support in driver which uses multi-reply queue
- [SCSI] mpt2sas: Bump driver version 09.100.00.01 (nagalakshmi.nandigama)
- [SCSI] mpt2sas: take size of pointed value, not pointer (Julia Lawall)
- [SCSI] mpt2sas: MPI next revision header update (nagalakshmi.nandigama)
- [SCSI] mpt2sas: New feature - Fast Load Support (nagalakshmi.nandigama)
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix for system hang when discovery in progress
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix failure message displayed during diag reset
removed while host reset is active (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix drives not getting properly deleted if sas cable is
sas_device_lock (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix for dead lock occurring between host_lock and
reset context (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix for deadlock between hot plug worker threads and host
complete while issued during creating a volume (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix for issue Port Reset taking long time(around 5 mins) to
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix for Panic when inactive volume is tried deleting
- [SCSI] mpt2sas: Bump driver version to 10.100.00.00 (nagalakshmi.nandigama)
- [SCSI] mpt2sas: add missing allocation. (Dan Carpenter)
context (Anton Blanchard)
- [SCSI] mpt2sas: _scsih_smart_predicted_fault uses GFP_KERNEL in interrupt
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Better handling DEAD IOC (PCI-E LInk down) error condition
to avoid infinite resets (nagalakshmi.nandigama)
- [SCSI] mpt2sas: When IOs are terminated, update the result to DID_SOFT_ERROR
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Adding support for customer specific branding
- [SCSI] mpt2sas: MPI next revision header update (nagalakshmi.nandigama)
callback when all the LUNS have been deleted (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Do not set sas_device->starget to NULL from the slave_destroy
(nagalakshmi.nandigama)
initialized prior to sending the request to controller firmware
- [SCSI] mpt2sas: Rearrange the the code so that the completion queues are
- [SCSI] mpt2sas: Bump driver version to 11.100.00.00 (nagalakshmi.nandigama)
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Support for greater than 2TB capacity WarpDrive
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Increase max transfer support from 4MB to 16MB
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Added support for customer specific branding
- [SCSI] mpt2sas: MPI next revision header update (nagalakshmi.nandigama)
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Release spinlock for the raid device list before blocking it
(nagalakshmi.nandigama)
- [SCSI] mpt2sas: Do not retry a timed out direct IO for warpdrive
(nagalakshmi.nandigama)
- [SCSI] mpt2sas : Fix for memory allocation error for large host credits
- [SCSI] mpt2sas : Bump driver vesion to 12.100.00.00 (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Fix leak on mpt2sas_base_attach() error path (Roland Dreier)
- [SCSI] mpt2sas: Fix possible integer truncation of cpu_count (Roland Dreier)
Dreier)
- [SCSI] mpt2sas: Remove unused duplicate diag_buffer_enable param (Roland
_scsih_probe (nagalakshmi.nandigama)
- [SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from
- Btrfs: fix barrier flushes (Chris Mason)
- btrfs: Fix up 32/64-bit compatibility for new ioctls (Jeff Mahoney)
- btrfs: mirror_num should be int, not u64 (Jan Schmidt)
- Btrfs: fix to search one more bitmap for cluster setup (Li Zefan)
- Btrfs: avoid unnecessary bitmap search for cluster setup (Li Zefan)
- btrfs: fix stat blocks accounting (David Sterba)
- Btrfs: prefix resize related printks with btrfs: (Arnd Hannemann)
- Btrfs: wait on caching if we're loading the free space cache (Josef Bacik)
- Btrfs: clear pages dirty for io and set them extent mapped (Josef Bacik)
- Btrfs: sectorsize align offsets in fiemap (Josef Bacik)
- Btrfs: remove free-space-cache.c WARN during log replay (Chris Mason)
- btrfs scrub: handle -ENOMEM from init_ipath() (Dan Carpenter)
- Fix URL of btrfs-progs git repository in docs (Arnd Hannemann)
- Btrfs: fix deadlock on metadata reservation when evicting a inode (Miao Xie)
- Btrfs: Don't error on resizing FS to same size (Mike Fleetwood)
- Btrfs: fix oops when calling statfs on readonly device (Li Zefan)
- Btrfs: initialize new bitmaps' list (Alexandre Oliva)
- Btrfs: reset cluster's max_size when creating bitmap (Alexandre Oliva)
- Btrfs: start search for new cluster at the beginning (Alexandre Oliva)
- Btrfs: skip block groups without enough space for a cluster (Alexandre Oliva)
- Btrfs: skip allocation attempt from empty cluster (Alexandre Oliva)
- Btrfs: fix meta data raid-repair merge problem (Jan Schmidt)
Oliva)
- Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE (Alexandre
- Btrfs: try cluster but don't advance in search list (Alexandre Oliva)
- Btrfs: check if the to-be-added device is writable (Li Zefan)
- Btrfs: drop spin lock when memory alloc fails (Liu Bo)
Mason)
- Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror (Chris
- Btrfs: fix wrong i_size when truncating a file to a larger size (Miao Xie)
- Btrfs: fix wrong disk space information of the files (Miao Xie)
- Btrfs: fix inaccurate available space on raid0 profile (Miao Xie)
- btrfs: keep orphans for subvolume deletion (Arne Jansen)
- Btrfs: fix ctime update of on-disk inode (Li Zefan)
- Btrfs: add a cond_resched() into the worker loop (Chris Mason)
- BTRFS: Establish i_ops before calling d_instantiate (Casey Schaufler)
Bacik)
- Btrfs: fix num_workers_starting bug and other bugs in async thread (Josef
- Btrfs: deal with enospc from dirtying inodes properly (Chris Mason)
error (Josef Bacik)
- Btrfs: fix how we do delalloc reservations and how we free reservations on
- Btrfs: fix leaked space in truncate (Josef Bacik)
- Btrfs: don't panic if orphan item already exists (Josef Bacik)
- Btrfs: only set cache_generation if we setup the block group (Josef Bacik)
Mason)
- Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code (Chris
- Btrfs: unplug every once and a while (Chris Mason)
- scsi: qla_isr.c: fix comment typo 'hammmer' (Justin P. Mattock)
- qla2xxx: Basic infrastructure for dynamic logging. (Saurav Kashyap)
Kashyap)
- qla2xxx: Code changes to support new dynamic logging infrastructure. (Saurav
- qla2xxx: Cleanup of previous infrastructure. (Saurav Kashyap)
- qla2xxx: T10 DIF - Handle uninitalized sectors. (Arun Easi)
- qla2xxx: T10 DIF - Fix incorrect error reporting. (Arun Easi)
- qla2xxx: Fix qla24xx revision check while enabling interrupts. (Chad Dupuis)
- qla2xxx: Acquire hardware lock while manipulating dsd list. (Saurav Kashyap)
(Chad Dupuis)
- qla2xxx: Double check for command completion if abort mailbox command fails.
(Saurav Kashyap)
- qla2xxx: Save and restore irq in the response queue interrupt handler.
- qla2xxx: Set the task attributes after memsetting fcp cmnd. (Saurav Kashyap)
- qla2xxx: Update version number to 8.03.07.07-k. (Chad Dupuis)
(Giridhar Malavali)
- qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.
- qla2xxx: Implemeted beacon on/off for ISP82XX. (Saurav Kashyap)
(Saurav Kashyap)
- qla2xxx: Prevent CPU lockups when "ql2xdontresethba" module param is set.
be changed dynamically. (Chad Dupuis)
- qla2xxx: Enable write permission to some debug related module parameters to
Kashyap)
- qla2xxx: check for marker IOCB during response queue processing. (Saurav
- qla2xxx: Fix array out of bound warning. (Saurav Kashyap)
- qla2xxx: During loopdown perform Diagnostic loopback. (Saurav Kashyap)
- qla2xxx: Correction to sysfs edc interface. (Joe Carnuccio)
- qla2xxx: Provide method for updating I2C attached VPD. (Joe Carnuccio)
- qla2xxx: Return sysfs error codes appropriate to conditions. (Joe Carnuccio)
ISP82xx. (Giridhar Malavali)
- qla2xxx: Issue mailbox command only when firmware hung bit is reset for
- qla2xxx: Fix "active_mask" may be used uninitialized warning. (Chad Dupuis)
- scsi: fix qla2xxx printk format warning (Randy Dunlap)
- qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload (Roland Dreier)
- qla2xxx: Correct inadvertent clearing of RISC_INTR status. (Andrew Vasquez)
- qla2xxx: Remove qla2x00_wait_for_loop_ready function. (Saurav Kashyap)
- qla2xxx: Check for SCSI status on underruns. (Arun Easi)
- qla2xxx: Don't call alloc_fw_dump for ISP82XX. (Saurav Kashyap)
Malavali)
- qla2xxx: Revert back the request queue mapping to request queue 0. (Giridhar
interrupt mode during firmware hang. (Giridhar Malavali)
- qla2xxx: Stop unconditional completion of mailbox commands issued in
Malavali)
- qla2xxx: Enable Minidump by default with default capture mask 0x1f. (Giridhar
recovery. (Andrew Vasquez)
- qla2xxx: Return the correct value for a mailbox command if 82xx is in reset
- qla2xxx: Display IPE error message for ISP82xx. (Chad Dupuis)
- qla2xxx: Correct fc_host port_state display. (Saurav Kashyap)
0. (Giridhar Malavali)
- qla2xxx: Submit all chained IOCBs for passthrough commands on request queue
- qla2xxx: Update version number to 8.03.07.12-k. (Chad Dupuis)
- qla2xxx: Use less stack to emit logging messages. (Joe Perches)
current broken uses as appropriate. (Joe Perches)
- qla2xxx: Make the logging functions verify their arguments and fixed the
- qla2xxx: Update to dynamic logging. (Chad Dupuis)
(Giridhar Malavali)
- qla2xxx: Proper cleanup of pass through commands when firmware returns error.
- qla2xxx: Only read requested mailbox registers. (Andrew Vasquez)
- qla2xxx: Limit excessive DPC cycles. (Andrew Vasquez)
- qla2xxx: Fix to include FCE data as part of dump. (Giridhar Malavali)
- qla2xxx: Correct report-id acquisition check (Giridhar Malavali)
- qla2xxx: Corrections to returned sysfs error codes. (Joe Carnuccio)
mask. (Giridhar Malavali)
- qla2xxx: Corrected the default setting of the help text of Minidump capture
(Giridhar Malavali)
- qla2xxx: Corrected the display of firmware dump availability for ISP82xx.
(Giridhar Malavali)
- qla2xxx: Added a new entry to ISP specific function pointers structure.
- qla2xxx: Process marker IOCB request on request queue 0. (Giridhar Malavali)
- qla2xxx: Consolidated IOCB processing routines. (Giridhar Malavali)
- qla2xxx: Implement FCP priority tagging for 82xx adapters. (Saurav Kashyap)
(Andrew Vasquez)
- qla2xxx: Ensure there's enough request-queue space for passthru IOCBs.
Dupuis)
- qla2xxx: Move initialization of some variables before iospace_config. (Chad
(Chad Dupuis)
- qla2xxx: Do not check for minidump when device state is QLA82XX_DEV_READY.
- SCSI, qla2xxx: remove redundant semicolon (Jesper Juhl)
Anderson)
- be2iscsi 4.1.239.0 [PATCH 01/10] Remove host and session casts (Chuck
(Chuck Anderson)
- be2iscsi 4.1.239.0 [PATCH 02/10] Fixing the /proc/interrupts problem V3
- be2iscsi 4.1.239.0 [PATCH 03/10] Adding a shutdown Routine (Chuck Anderson)
- be2iscsi 4.1.239.0 [PATCH 04/10] Add pci_disable device (Chuck Anderson)
- be2iscsi 4.1.239.0 [PATCH 05/10] Fix for kdump failure (Chuck Anderson)
Anderson)
- be2iscsi 4.1.239.0 [PATCH 06/10] Fix for wrong dmsg setting in wrb (Chuck
earlier (Chuck Anderson)
- be2iscsi 4.1.239.0 [PATCH 07/10] Fix for case where task->sc was cleanedup
Anderson)
- be2iscsi 4.1.239.0 [PATCH 08/10] memset wrb for ring create (Chuck
Anderson)
- be2iscsi 4.1.239.0 [PATCH 09/10] Move driver Version to 4.1.239.0 (Chuck
(Chuck Anderson)
- be2iscsi 4.1.239.0 [PATCH 10/10] Fix in the ASYNC PDU handling code path.
- qlcnic driver v5.0.25.1 for UEK2 2.6.39 (Chuck Anderson)
-
Wed Nov 16 2011 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-100.0.17.el5uek]
- Update Btrfs
- turn on CONFIG_PARAVIRT_SPINLOCKS for bare metal
- xen-gntalloc: signedness bug in add_grefs()
- xen-gntalloc: integer overflow in gntalloc_ioctl_alloc()
- xen-gntdev: integer overflow in gntdev_alloc_map()
- xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.
- xen/balloon: Avoid OOM when requesting highmem
- xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI
-
Fri Nov 11 2011 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-100.0.16.el5uek]
- SPEC: fixes for spec file [orabugs 13359985, 13339700, 13348381]
- config: enable IP_PNP
- Merge branch 'uek2-merge' of git://oss.oracle.com/git/kwilk/xen into uek2-stable
- ocfs2: Fix cleancache initialization call to correctly pass uuid
- Merge branch 'stable/xen-block.rebase' into uek2-merge
- xen/blkback: Fix two races in the handling of barrier requests.
- xen/blkback: Check for proper operation.
- xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
- xen/blkback: Report VBD_WSECT (wr_sect) properly.
- xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
- xen-blkfront: plug device number leak in xlblk_init() error path
- xen-blkfront: If no barrier or flush is supported, use invalid operation.
- xen-blkback: use kzalloc() in favor of kmalloc()+memset()
- xen-blkback: fixed indentation and comments
- xen-blkfront: fix a deadlock while handling discard response
- xen-blkfront: Handle discard requests.
- xen-blkback: Implement discard requests ('feature-discard')
- xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
- xen/blkback: Add module alias for autoloading
- xen/blkback: Don't let in-flight requests defer pending ones.
- Merge branch 'stable/xen-settime' into uek2-merge
- Merge branch 'stable/e820-3.2.rebased' into uek2-merge
- Merge branch 'stable/mmu.fixes.rebased' into uek2-merge
- Merge branch 'stable/drivers-3.2.rebased' into uek2-merge
- Merge branch 'stable/cleanups-3.2.rebased' into uek2-merge
- Merge branch 'stable/pci.fixes-3.2' of git://oss.oracle.com/git/kwilk/xen into uek2-merge
- Merge branch 'stable/bug.fixes-3.2.rebased' of git://oss.oracle.com/git/kwilk/xen into uek2-merge
- Merge branch 'stable/xen-pciback-0.6.3.bugfixes' of git://oss.oracle.com/git/kwilk/xen into uek2-merge
- xen/irq: If we fail during msi_capability_init return proper error code.
- xen: remove XEN_PLATFORM_PCI config option
- xen: XEN_PVHVM depends on PCI
- xen/p2m/debugfs: Make type_name more obvious.
- xen/p2m/debugfs: Fix potential pointer exception.
- xen/enlighten: Fix compile warnings and set cx to known value.
- xen/xenbus: Remove the unnecessary check.
- xen/events: Don't check the info for NULL as it is already done.
- xen/pci: Use 'acpi_gsi_to_irq' value unconditionally.
- xen/pci: Remove 'xen_allocate_pirq_gsi'.
- xen/pci: Retire unnecessary #ifdef CONFIG_ACPI
- xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the end
- xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.
- xen/pci: Use the xen_register_pirq for HVM and initial domain users
- xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.
- xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.
- xen/pci: Update comments and fix empty spaces.
- xen/pci: Shuffle code around.
- xen/dom0: set wallclock time in Xen
- xen: add dom0_op hypercall
- xen/acpi: Domain0 acpi parser related platform hypercall
- xen: release all pages within 1-1 p2m mappings
- xen: allow extra memory to be in multiple regions
- xen: allow balloon driver to use more than one memory region
- xen/balloon: simplify test for the end of usable RAM
- xen/balloon: account for pages released during memory setup
- xen/e820: if there is no dom0_mem=, don't tweak extra_pages.
- Revert "xen/e820: if there is no dom0_mem=, don't tweak extra_pages."
- xen/e820: if there is no dom0_mem=, don't tweak extra_pages.
- xen: use maximum reservation to limit amount of usable RAM
- xen: Fix misleading WARN message at xen_release_chunk
- xen: Fix printk() format in xen/setup.c
- xen/gntdev: Fix sleep-inside-spinlock
- xen: modify kernel mappings corresponding to granted pages
- xen: add an "highmem" parameter to alloc_xenballooned_pages
- xen/p2m: Use SetPagePrivate and its friends for M2P overrides.
- xen/p2m: Make debug/xen/mmu/p2m visible again.
- Revert "xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set."
- xen/pciback: Check if the device is found instead of blindly assuming so.
- xen/pciback: Do not dereference psdev during printk when it is NULL.
- xen/pciback: double lock typo
- xen/pciback: use mutex rather than spinlock in vpci backend
- xen/pciback: Use mutexes when working with Xenbus state transitions.
- xen/pciback: miscellaneous adjustments
- xen/pciback: use mutex rather than spinlock in passthrough backend
- xen/pciback: use resource_size()
- xen: use static initializers in xen-balloon.c
- Xen: fix braces and tabs coding style issue in xenbus_probe.c
- Xen: fix braces coding style issue in xenbus_probe.h
- Xen: fix whitespaces,tabs coding style issue in drivers/xen/pci.c
- Xen: fix braces coding style issue in gntdev.c and grant-table.c
- Xen: fix whitespaces,tabs coding style issue in drivers/xen/events.c
- Xen: fix whitespaces,tabs coding style issue in drivers/xen/balloon.c
-
Wed Oct 19 2011 Joe Jin <joe.jin@oracle.com> [2.6.39-100.0.15.el5uek]
- [scsi] cciss: Use cciss for some Smart Array controller when build for OL5
- [Kconfig]: Add CONFIG_UEK5 option.
-
Wed Oct 12 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.14.el5uek]
- Apply signature checking to modules on module load (David Howells)
- Don't include .note.gnu.build-id in the digest (David Howells)
- config: turn on module sign (Maxim Uvarov)
- fix modpost port bug for module signatures (Maxim Uvarov)
- xen: Fix selfballooning and ensure it doesn't go too far (Dan Magenheimer)
- config: disable XEN_BALLOON_MEMORY_HOTPLUG
- apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches (Jan Beulich)
-
Mon Oct 10 2011 Maxim Uvarov <maxim.uvarov@oracle.com> [2.6.39-100.0.13.el5uek]
- fix btrfs compilation for 32 bit
- ext4 turn on CONFIG_LBDAF for 32bit kernel [orabug 12965485]
- exec: do not call request_module() twice from search_binary_handler()
- merge 3.0.6 patches
-
Thu Sep 29 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.12.el5uek]
- audit: dynamically allocate audit_names when not enough spaceis in the names array [orabug 13038425]
- update btrfs 3.0
-
Wed Sep 28 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.11.el5uek]
- xen: Add bootmem.h in xen-selfballoon.c
-
Wed Sep 28 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.10.el5uek]
- mpt2sas: Add a module parameter that permits overriding protection capabilities
- mpt2sas: Return the correct sense key for DIF errors
- mpt2sas: Do not check DIF for unwritten blocks
- Revert "xen/e820: if there is no dom0_mem=, don't tweak extra_pages."
- Revert "[AUDIT/workaround] Increase AUDIT_NAMES array len" [orabug 13034299]
- block: Rate-limit failed I/O error message [orabug 13007648]
- config: disable panic on hardlockup [orabug 13007648]
- ocfs2: update ocfs2 version [orabug 13017352]
- x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode
- bnx2x: prevent flooded warnning kernel info [orabug 12687487]
- tg3: Dont dump DMA error when interface not ready [orabug 12981473]
- xen: Fix selfballooning and ensure it doesn't go too far
- ocfs2: Add datavolume mount option [orabug 13017352]
-
Thu Sep 22 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.9
.el5uek]
- generate -paravirt configs more accurate [orabug 13002151]
- radeon: add missed firmwares [orabug 12981553]
- ksplice: Clear garbage data on the kernel stack when handling signals
- Add devel headers [orabug 13000607]
-
Wed Sep 21 2011 Kevin Lyons [2.6.39-100.0.8.el5uek]
- Add -u parameter to kernel_variant_post to make it work
properly for uek [orabug 12965870]
-
Tue Sep 20 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.7.el5uek]
- fix --noarch build
- CONFIG: Add support for Large files - 32bit orabug 12984979
-
Mon Sep 19 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.6.el5uek]
- rebase to 3.0.4
- Build paravirt and paravirt-debug kernels
- Remove commented out patches from spec
- Specfile: build OCFS2
- make XEN_MAX_DOMAIN_MEMORY selectable
- config-debug: enable LOCKDEP and more debug options
- Turn on CONFIG_CRYPTO_FIPS (Maxim Uvarov)
- CONFIG: enable sysfs(el5) and xen memory hotplug
- scsi: bump up SD_MAX_DISKS (Dave Kleikamp)
- x86, acpi: Handle xapic/x2apic entries in MADT at same time (Yinghai Lu)
-
Tue Sep 13 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.5.el5uek]
- xen: allow enable use of VGA console on dom0
- xen: prepare tmem shim to handle frontswap
- xen: Add __attribute__((format(printf... where appropriate
- xen: Populate xenbus device attributes
- xen: Add module alias to autoload backend drivers
- xen: tmem: self-ballooning and frontswap-selfshrinking
- xen/pci: Shuffle code around.
- xen/pci: Update comments and fix empty spaces.
- xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.
- xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.
- xen/pci: Use the xen_register_pirq for HVM and initial domain users
- xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.
- xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the end
- xen/pci: Retire unnecessary #ifdef CONFIG_ACPI
- xen/pci: Remove 'xen_allocate_pirq_gsi'.
- xen/pci: Use 'acpi_gsi_to_irq' value unconditionally.
- xen/pciback: xen pci backend driver.
- xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
- xen/pciback: Register the owner (domain) of the PCI device.
- xen/pciback: guest SR-IOV support for PV guest
- xen/pciback: Disable MSI/MSI-X when reseting a device
- xen/pciback: Allocate IRQ handler for device that is shared with guest.
- xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
- xen: rename pciback module to xen-pciback.
- xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
- xen/pciback: Print out the MSI/MSI-X (PIRQ) values
- xen/pciback: Drop two backends, squash and cleanup some code.
- xen/pciback: Remove the DEBUG option.
- xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
- mm: frontswap: swap data structure changes
- mm: frontswap: core code
- mm: frontswap: add swap hooks and extend try_to_unuse
- mm: frontswap: config and doc files
- xen:pvhvm: Modpost section mismatch fix
- xen/pciback: remove duplicated #include
- trace/xen: add skeleton for Xen trace events
- xen/multicalls: remove debugfs stats
- xen/trace: set up tracepoint skeleton
- xen/trace: add multicall tracing
- xen/trace: add mmu tracepoints
- xen/trace: add ptpage alloc/release tracepoints
- xen/trace: add xen_pgd_(un)pin tracepoints
- xen/trace: add segment desc tracing
- xen/trace: add tlb flush tracepoints
- xen/mmu: use extend_args for more mmuext updates
- xen/mmu: tune pgtable alloc/release
- xen/multicalls: disable MC_DEBUG
- xen/multicalls: add unlikely around slowpath in __xen_mc_entry()
- xen/multicall: special-case singleton hypercalls
- xen/multicall: move *idx fields to start of mc_buffer
- xen/trace: convert mmu events to use DECLARE_EVENT_CLASS()/DEFINE_EVENT()
- xen/trace: use class for multicall trace
- xen/tracing: fix compile errors when tracing is disabled.
- xen/tracing: it looks like we wanted CONFIG_FTRACE
- xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set
- xen/tracing: Fix tracing config option properly
- Input: xen-kbdfront - enable driver for HVM guests
- xen/balloon: memory hotplug support for Xen balloon driver
- mm: extend memory hotplug API to allow memory hotplug in virtual machines
- xen/blkback: Add module alias for autoloading
- xen/blkback: Don't let in-flight requests defer pending ones.
- xen/netback: Add module alias for autoloading
- xen: convert to 64 bit stats interface
- xen/balloon: Fix compile errors - missing header files.
- xen/self-balloon: Add dependency on tmem.
- xen: xen-selfballoon.c needs more header files
- xen/grant: Fix compile warning.
- xen: Fix printk() format in xen/setup.c
- xen: Fix misleading WARN message at xen_release_chunk
- xen/x86: replace order-based range checking of M2P table by linear one
- xen: Do not enable PV IPIs when vector callback not present
- xen-blkfront: Fix one off warning about name clash
- xen-blkfront: Drop name and minor adjustments for emulated scsi devices
- xen/blkback: Make description more obvious.
- xen-blkback: fixed indentation and comments
- SCSI: Fix oops dereferencing queue
- xen: use maximum reservation to limit amount of usable RAM
- xen: x86_32: do not enable iterrupts when returning from exception in interrupt context
- xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.
- xen: disable PV spinlocks on HVM
- xen/e820: if there is no dom0_mem=, don't tweak extra_pages.
- config: from 6.1 and review
- Revert "IPC reduce lock contention in semctl"
- Revert "IPC lock reduction corners"
- Revert "use rwlocks for ipc"
- Revert "ipc semaphores: order wakeups based on waiter CPU"
- Revert "ipc semaphores: reduce ipc_lock contention in semtimedop
-
Thu Aug 25 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.4.el5uek]
- revert makefile to 2.6.39
-
Wed Aug 24 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.3.el5uek]
- Rebase to linux-3.0.3
-
Thu Aug 11 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.2.el5uek]
- [AUDIT/workaround] Increase AUDIT_NAMES array len (Maxim Uvarov)
- Increase kernel log buffer to 1MB (SHIFT=20)
- export list of msi irqs into sysfs (Chris Mason)
- memcg: mark init_section_page_cgroup() properly (Namhyung Kim)
- memcg: fix init_page_cgroup nid with sparsemem (KAMEZAWA Hiroyuki)
-
Fri Jul 29 2011 Guru Anbalagane <guru.anbalagane@oracle.com> [2.6.39-100.0.1.el5uek]
- Linux 2.6.39.3
- ipc semaphores: reduce ipc_lock contention in semtimedop
- ipc semaphores: order wakeups based on waiter CPU
- use rwlocks for ipc
- IPC lock reduction corners
- IPC reduce lock contention in semctl
- Batched wakeups from ipc