-
Thu Jan 10 2013 Jingdong Lu <jingdong.lu@oracle.com> 5.1.19.6-79.0.1.el5
- Add /lib64/libgcc_s.so.1 to initrd for device-mapper-multipath. (Guangyu Sun) [orabug 15829409]
- fix initrd creation for root on btrfs file systems (Maxim Uvarov) [orabug 13823284]
- Fix scsi initialization order. mkinitrd_stab_before_usb.patch (Maxim Uvarov) [orabug 14030199]
- Fix modinfo warning when module not existing in th kernel. (Joe Jin)
- Fix no kerver version made modinfo show warning [orabug 13784172] (Joe Jin)
- Fix findmodule rds recursive when installed ofa [orabug 13699238] (Joe Jin)
- fix regression in firmware pickup [orabug 13637902] (Guru Anbalagane)
- include Xen drivers if PCI ID 0x58530001 exists (the unplug driver) [orabug 13624626] (Konrad Rzeszutek Wilk)
- replace deprecated oom_adj interface with oom_score_adj [orabug 13528775] (Chuck Anderson)
- Fix mkinitrd for 2.6.39 under old 2.6.18 [orabug 13522440] (Maxim Uvarov)
- Load firmware from /lib/formware/(uname -r) directory also (Maxim Uvarov)[13459000]
- Scan for device mapper devices along with md devices in nash [bug 12992623]
- Be tolerant of missing modules that are actually built-in [orabug 12814599]
- add --with-multipath option to force load mpath in the case of LVM-on-mpath [orabug 11781507] (John Sobecki)
- revert early patch that did auto-mpath detection. Reason: If the
/etc/multipath.conf was not properly configured, it could result in local
sda disks getting allocated by multipath (sda1 is busy error during boot)
- fix setquiet warning due to verbose logic addition [orabug 12753043]
- support for firmware files under subdir in lib/firmware [orabug 12724067]
- More updates to support both 32 and 64 bit installs
- Copy over the /etc/multipath/bindings file to the initrd image to try
and preserve the old mpath0 device names [orabug 10282894] (John Sobecki)
- Update mkinitrd to handle 32 and 64 bit shared libs for multipath [orabug 12697173] (John Sobecki)
- Check for mpath in the case of LVM-on-mpath [orabug 11781507] (John Sobecki)
- Add shared libs needed for multipath executable [orabug 10202864] (John Sobecki)
- Change module detection logic to work with 5.x and UEK kernels (John Sobecki)
- When using the -v option, take out the setquiet in the initrd image (John Sobecki)
- Detect /etc/enterprise-release
- Don't try to reload same driver [orabug 10209399] (Joe Jin)
- Merges for UEK
* Fix blkid scanning to prefer MD devices when we find them. If /dev/sda
and /dev/sdb are in a MD raidset, /dev/mdX, /dev/sda and /dev/sdb will all
have the same filesystem label and uuid. Nash has code that goes through
all the blkid tags in sysfs order, and it will pick whichever one pops up
first.
This changes nash to always prefer md devices.
It also forces a wait for scsi devices to settle, if scsi isn't compiled as a\ module it won't autodetect that we should wait for scsi devices. (Chris Mason)
* Add udev and firmware_helper to initrd so firmware gets loaded during boot (Guru Anbalagane)
-
Thu Sep 20 2012 Brian C. Lane <bcl@redhat.com> 5.1.19.6-79
- load Hyper-V modules first (bcl)
Resolves: rhbz#852686
-
Tue Jun 19 2012 Brian C. Lane <bcl@redhat.com> 5.1.19.6-78
- Use multipath -B to prevent it from writing to bindings file in the initrd (bcl)
Resolves: rhbz#782615
-
Tue Jun 05 2012 Brian C. Lane <bcl@redhat.com> 5.1.19.6-77
- Check vmlinuz after RAID activation in FIPS mode (bcl)
Resolves: rhbz#737081
-
Tue Apr 17 2012 Brian C. Lane <bcl@redhat.com> 5.1.19.6-76
- Handle multipath root with LABEL
Resolves: rhbz#556785
-
Wed Oct 26 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-75
- Replace patch for (#593096) with one that works (bcl)
Resolves: rhbz#593096
-
Tue Oct 18 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-74
- Add mpath to the paths searched for DM devices (jruemker)
Resolves: rhbz#744330
-
Tue Sep 13 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-73
- Fixed typo in previous commit message and correct patch name
for bug 700592
-
Tue Sep 13 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-72
- Add multipath to the list of FIPS limitations. (#700102) (bcl)
Resolves: rhbz#700102
- rootdev should be a dev node (#532207) (bcl)
Resolves: rhbz#532207
- exit() from nash-hotplug when the parent pid dies (#700592) (oblin)
Resolves: rhbz#700592
- Add test for updating an existing arg on ALL kernels (#696971) (bcl)
Resolves: rhbz#696971
- Allow args changes to affect all kernel entries (#696971) (bcl)
Resolves: rhbz#696971
- Fix segfault on other sections (#679581) (bcl)
Resolves: rhbz#679581
- Support dirsync option in nash's mount command (#602409) (cdahlin)
Resolves: rhbz#602409
- Clear lvm command_names and prefix (#593096) (bcl)
Resolves: rhbz#593096
- Add channel bonding support when root is on iscsi (#529158) (bcl)
Resolves: rhbz#529158
- Only add a module once (#512892) (bcl)
Resolves: rhbz#512892
- s390 now requires dmraid (#620699) (bcl)
Resolves: rhbz#620699
- libdhcp-1.20-12 or later now required (#660731) (bcl)
Resolves: rhbz#660731
-
Fri May 06 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-71
- Use vecho in modprobe.d patch
Resolves: rhbz#564392
-
Fri Apr 29 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-70
- Add cryptomgr when using dm-crypt
Resolves: rhbz#694534
-
Tue Apr 05 2011 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-69
- Add module options from /etc/modprobe.d/*.conf
Resolves: rhbz#564392
-
Fri Dec 24 2010 Martin Sivak <msivak@redhat.com> - 5.1.19.6-68
- No iSCSI on s390
Related: rhbz#664389
-
Tue Dec 21 2010 Martin Sivak <msivak@redhat.com> - 5.1.19.6-67
- Add /sbin/iscsiadm to dependencies
Resolves: rhbz#664389
-
Fri Nov 19 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-66
- Attempt to pull in virtio_pci whenever any virtio module is used.
Related: rhbz#568325
-
Tue Sep 28 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-65
- Fix a spec file and patch error
Related: rhbz#499781
-
Sat Sep 25 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-64
- Set up each network interface only once.
Resolves: rhbz#499781
- Don't fail on s390* when dmraid.static isn't there but withdmraid is true
Resolves: rhbz#513961
-
Tue May 25 2010 Brian C. Lane <bcl@redhat.com> - 5.1.19.6-63.1
- Use location of bindings file from multipath.conf
Resolves: rhbz#593050
-
Fri Apr 16 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-62.1
- Update patch for 540641 to correctly use nash's builtin readlink
Resolves: rhbz#578236
-
Tue Mar 09 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-61
- Use "sg" not "scsi_wait_scan" on RHEL-5
Resolves: rhbz#460899 (#c56)
-
Thu Feb 25 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-60
- Follow symlinks when resolving kernel modules. (jleddy)
Resolves: rhbz#540641
-
Wed Feb 24 2010 Peter Jones <pjones@redhat.com> - 5.1.19.6-59
- Fix error in find_scsi_dh_modules() found during testing.
Resolves: rhbz#460899
-
Fri Feb 05 2010 Ales Kozumplik <akozumpl@redhat.com> - 5.1.19.6-58
- Do not attempt to read from an nonexistent DmNameCache.
Resolves: rhbz#516047
-
Fri Jan 29 2010 Ales Kozumplik <akozumpl@redhat.com> - 5.1.19.6-57
- replace nashDmGetDevName() with a cache
Resolves: rhbz#516047
-
Wed Dec 23 2009 Peter Jones <pjones@redhat.com> - 5.1.19.6-56
- Activate all configured multipath devices during bootup
Resolves: rhbz#438887
-
Tue Dec 22 2009 Peter Jones <pjones@redhat.com>
- Load all scsi_dh_* modules if we're setting up multipath.
Resolves: rhbz#460899
-
Tue Dec 22 2009 Peter Jones <pjones@redhat.com>
- Handle options with spaces in /etc/modprobe.conf
Resolves: rhbz#467850
- Handle root vg spanning multiple multipaths
Resolves: rhbz#501535
- Use lvm --dumpconfig to retrieve the lvm configuration
Resolves: rhbz#517868
-
Wed Nov 25 2009 Hans de Goede <hdegoede@redhat.com> - 5.1.19.6-55
- Stop local loop variable clobbering global rootdev
Resolves: rhbz#503567
- Don't try to activate RAID sub sets
Resolves: rhbz#526246
-
Thu Jun 18 2009 Hans de Goede <hdegoede@redhat.com> - 5.1.19.6-54
- Handle cciss controllers correctly in fips mode
Resolves: rhbz#505108
- IA64 has /boot/efi instead of /boot, handle this correctly in fips mode
Resolves: rhbz#505111
- Don't require prelink in fips mode
Resolves: rhbz#505113
-
Wed May 27 2009 Peter Jones <pjones@redhat.com> - 5.1.19.6-53
- Handle missing /proc/sys/crypto/fips_enabled correctly.
Resolves: rhbz#502624
-
Thu May 21 2009 Peter Jones <pjones@redhat.com> - 5.1.19.6-52
- Revert fix for 227711, it causes 501775 .
Related: #227711
-
Wed May 20 2009 Peter Jones <pjones@redhat.com> - 5.1.19.6-51
- Rebuild just to get the tags all right.
Related: rhbz#467497
-
Thu May 14 2009 Hans de Goede <hdegoede@redhat.com> - 5.1.19.6-50
- Make --with-fips work without -v
Resolves: rhbz#467497 rhbz#499639
-
Tue May 12 2009 Hans de Goede <hdegoede@redhat.com> - 5.1.19.6-49
- When in fips mode load tcrypt module to self test all crypto algorithms
Resolves: rhbz#499639
- Add --rm_partitions to dmraid invocation to stop IO-errors when booting
from striped dmraid.
Resolves: rhbz#475384
-
Wed May 06 2009 Peter Jones <pjones@redhat.com> - 5.1.19.6-48
- Fix swsuspdev label/uuid handling
Resolves: rhbz#489836
- Fix symlink generation in installkernel on ia64
Resolves: rhbz#227711
- Make netname command handle environmental variables correctly.
Resolves: rhbz#474422
-
Wed May 06 2009 Hans de Goede <hdegoede@redhat.com> - 5.1.19.6-47
- Force loading of all crypto modules in fips mode, so that they all get
integrity checked before any of them are used.
Resolves: rhbz#467497
-
Mon Apr 20 2009 Hans de Goede <hdegoede@redhat.com> - 5.1.19.6-46
- Add integrity checking of the kernel image to the generated initrd when in
fips mode.
Resolves: rhbz#467497
-
Sat Apr 18 2009 Peter Jones <pjones@redhat.com> - 5.1.19.6-45
- Supress failures if dm-raid45 modules are not present.
Resolves: rhbz#479270
-
Thu Dec 18 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-44
- Include dm-raid45 and related modules if dmraid is in use.
Resolves: rhbz#476866
-
Tue Dec 16 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-43
- Fix option passing in mountCommand
Resolves: rhbz#476537
-
Thu Dec 11 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-42
- Remove error message from failed stabilization on /proc/scsi/scsi
Resolves: rhbz#464636
-
Wed Nov 26 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-41
- Don't treat the first iteration of stabilized as a change
Resolves: rhbz#464636
- Revert "fix" in -40, as it breaks dmraid and multipath.
-
Thu Nov 06 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-40
- Handle modprobe options with spaces in them better
Resolves: rhbz#467850
-
Thu Oct 30 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-39
- Revert the fix to rhbz#276911, as it causes more bugs.
Resolves: rhbz#466848
- Improve handling of encrypted cciss devices. (dlehman)
Resolves: rhbz#467839
-
Sat Oct 18 2008 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-38
- BR libdhcp-devel >= 1.20-6
Resolves: rhbz#467499
-
Tue Oct 07 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-37
- Allow for disk arrays where the disks take > 1/4 second to respond
Resolves: rhbz#461850
-
Sat Oct 04 2008 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-36
- Support xDR multipath devices on s390x
Resolves: rhbz#184770
-
Tue Sep 23 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-35
- Remove extra dep on nash subpackage.
Related: rhbz#463216
-
Tue Sep 23 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-34
- Fix typo in requires in spec file.
Resolves: rhbz#463216
-
Sat Sep 20 2008 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-33
- Allow findstoragedriverinsys() to handle nodes in /sys without a slaves tree
Resolves: rhbz#461536
-
Fri Sep 19 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-32
- Fix some minor stuff rpmdiff found.
A total lie here:
Related: rhbz#426992
-
Fri Sep 19 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-31
- Don't limit zipl kernel label length to 15 any more.
Resolves: rhbz#426992
- Handle sysfs slave device directories slightly better.
Related: rhbz#447841
- Don't put all network interface's dhcp leases in the same file.
Related: rhbz#447375
-
Fri Aug 08 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-30
- Actually make this -30
Related: rhbz#451670
Related: rhbz#452927
-
Wed Jul 23 2008 Dave Lehman <dlehman@redhat.com> - 5.1.19.6-29
- Add support for encrypted block devices using LUKS/dm-crypt
Resolves: rhbz#451670
-
Wed Jul 16 2008 Peter Jones <pjones@redhat.com>
- Add kvm virtio pci device support.
Resolves: rhbz#446227
-
Wed Jul 16 2008 Peter Jones <pjones@redhat.com>
- Fix nfs mount option handling.
Resolves: rhbz#444973
-
Wed Jul 16 2008 Peter Jones <pjones@redhat.com>
- Fix typo in patch for bz241763
Resolves: rhbz#241763
- All ppc uses vmlinux instead of vmlinuz in new-kernel-package
Resolves: rhbz#276911
- Add support for DKMS hooks
Resolves: rhbz#440584
-
Sat Mar 29 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-28
- Fix bad regexp in devicemapper dependency resolution code
Resolves: rhbz#439371
- Re-do workaround for gfs2/lock_nolock dep brokenness
Resolves: rhbz#438743
-
Thu Mar 27 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-27
- Fix initialization of "withusb" on s390/s390x
Resolves: rhbz#432776
- Fix application of patch 15
Resolves: rhbz#428723
- Fix netdev naming with drivers specified on the command line
Resolves: rhbz#436509
-
Thu Mar 20 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-26
- Fix missing patch from -22 .
Resolves: rhbz#368821
-
Tue Mar 04 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-25
- Fix syntax error in previous build.
Resolves: rhbz#435717
-
Tue Mar 04 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-24
- Add support for _rnetdev in root filesystem options.
Resolves: rhbz#435717
-
Fri Feb 29 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-23
- Fix segfault in nash's "netname" command which effects iscsi root.
Resolves: rhbz#435165
-
Sat Feb 02 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-22
- Ignore floppy devices during filesystem label/uuid probing.
Resolves: rhbz#368821
-
Fri Feb 01 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-21
- Fix firmware loader completion logic
Resolves: rhbz#235277
- Support spaces in the kernel command line
Resolves: rhbz#240779
- Clarify module option documentation
Resolves: rhbz#241763
-
Fri Feb 01 2008 Peter Jones <pjones@redhat.com> - 5.1.19.6-20
- Add iSCSI Boot Firmware Table support
Resolves: rhbz#307771
- Handle empty dm rules better
Resolves: rhbz#244202
- Load usb modules in correct order
Resolves: rhbz#234847
- Fix multipath on iscsi
Resolves: rhbz#428723
-
Wed Sep 12 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-19
- More conflicting header fixes
Related: rhbz#277481
-
Thu Sep 06 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-18
- Fix conflicting headers
Resolves: rhbz#277481
-
Wed Aug 15 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-17
- Set withusb=0 on s390x and s390 architectures
Resolves: rhbz#251136
-
Thu Jul 19 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-16
- Invoke kpartx the same was as rc.sysinit to maintain naming consistency
Related: rhbz#185852
- Remove unused code
Related: rhbz#185852
-
Thu Jul 12 2007 Peter Jones <pjones@redhat.com> - 5.1.19.6-15
- Add more ways to do detection for the EMC hardware handler module.
Related: #185852
-
Thu Jul 12 2007 Peter Jones <pjones@redhat.com> - 5.1.19.6-14
- Add support for disabling dmraid from a config file so we don't regress
Related: #185852
- Clean up new mpath code.
Related: #185852
-
Tue Jul 10 2007 Peter Jones <pjones@redhat.com> - 5.1.19.6-13
- Fix "--without-usb"
Resolves: #230852
- Make /lib/firmware before trying to put things there
Related: #218452
-
Tue Jul 10 2007 Peter Jones <pjones@redhat.com> - 5.1.19.6-12
- Don't try to guess a module path if modprobe can find it
Resolves: #218452
- Load sd_mod explicitly during iscsi boot.
Resolves: #222685
-
Sat Jul 07 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-11
- Remove unnecessary text
Resolves: rhbz#238019
- Handle EMC storage arrays when gathering WWIDs for multipath devices
Related: rhbz#185852
-
Fri Jul 06 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-10
- Pass the '-p p' argument to kpartx
Related: rhbz#185852
-
Fri Jul 06 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-9
- Quote tr arguments to avoid errors from certain input
Related: rhbz#185852
- In the inst() function, make the destination directory if it doesn't exist
Related: rhbz#185852
-
Wed Jun 27 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-8
- Properly install files and symlinks in installkernel (prarit)
Resolves: rhbz#227711
-
Thu Jun 21 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-7
- Ignore Xen block devices when collecting WWID values
Related: rhbz#185852
-
Wed Jun 20 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-6
- Require device-mapper-multipath and kpartx packages
Related: rhbz#185852
-
Wed Jun 20 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-5
- Bring network devices up before iscsistart runs
Related: rhbz#185852
-
Tue Jun 19 2007 David Cantrell <dcantrell@redhat.com> - 5.1.19.6-4
- Make sure to copy in /var/lib/multipath/bindings to the initrd
- Bring up multipath devices by WWID on initrd boot
- Resolves: rhbz#185852
- Resolves: rhbz#216240
-
Sun Jun 03 2007 Jon Masters <jcm@redhat.com> - 5.1.19.6-3
- Backport firmware fixes from Fedora 7 into RHEL5
(use modinfo to discover firmware files required).
Related: rhbz#184773
-
Thu May 31 2007 Jon Masters <jcm@redhat.com> - 5.1.19.6-2
- Add support for modinfo to locate modules.
- Add elilo fixes for IA64 to new-kernel-pkg.
Resolves: #239392
Related: #224076
-
Fri Jan 19 2007 Peter Jones <pjones@redhat.com> - 5.1.19.6-1
- Don't create /dev/ttyN on s390*
Resolves: #209204
-
Tue Jan 16 2007 Peter Jones <pjones@redhat.com> - 5.1.19.5-1
- Use a different method of getting iscsi info
Resolves: #221088
-
Fri Jan 12 2007 Peter Jones <pjones@redhat.com> - 5.1.19.4-1
- Fix LABEL/UUID handling in mkinitrd
Resolves: #222106
-
Fri Jan 05 2007 Jeremy Katz <katzj@redhat.com> - 5.1.19.3-1
- don't create /dev/tty* on s390 (#209204)
- handle multi-line options (#209447)
- ensure that scsi devices have stabilized to ensure the rootdev
is available (#213039)
- iscsi tools changed their syntax somewhat (#221088)
-
Sat Dec 16 2006 Peter Jones <pjones@redhat.com> - 5.1.19.2-1
- Honor installing with 'nompath' (#219483)
-
Thu Dec 07 2006 Peter Jones <pjones@redhat.com> - 5.1.19.1-2
- Rebuild for new libparted (#218624)
-
Tue Oct 31 2006 Peter Jones <pjones@redhat.com> - 5.1.19.1-1
- Merge missing FC6 fixes back into this branch to eliminate regressions.
-
Fri Sep 29 2006 Peter Jones <pjones@redhat.com> - 5.1.19-1
- Fix booting on non-LVM devices where sysfs uses a '!' in the device path,
such as cciss. (#201875, #196360)
-
Thu Sep 28 2006 Peter Jones <pjones@redhat.com> - 5.1.18-1
- Split nash into its own package to work around dep sorting issue on install.
-
Fri Sep 22 2006 Peter Jones <pjones@redhat.com> - 5.1.17-1
- Fix module dependency probing when there's no modalias
-
Thu Sep 21 2006 Peter Jones <pjones@redhat.com> - 5.1.16-1
- Don't require non-tmpfs tmpdir unless we're using loopback
- Fix symlink chasing for yaboot.conf in grubby (#207302)
-
Thu Sep 21 2006 Jeremy Katz <katzj@redhat.com>
- Hack for moduledeps of gfs2/nfs
-
Wed Sep 20 2006 Jeremy Katz <katzj@redhat.com>
- Handle zfcp.conf not specifying scsiid and scsilun (#198803)
-
Wed Sep 13 2006 Peter Jones <pjones@redhat.com>
- Fix escaping error in md-handler's awk script
-
Sat Sep 09 2006 Jesse Keating <jkeating@redhat.com> - 5.1.15-1
- more typos to fix related to (#205194)
-
Sat Sep 09 2006 Peter Jones <pjones@redhat.com> - 5.1.14-1
- Fix another typo in the same one-line shell wrapper (#205194)
-
Sat Sep 09 2006 Peter Jones <pjones@redhat.com> - 5.1.13-1
- Fix missing coreutils dep and typo in shell wrapper (#205194)
- Fix bad mpath test (#204758)
-
Fri Sep 08 2006 Peter Jones <pjones@redhat.com> - 5.1.12-1
- Fix bug in dm dependency scanning (#205635)
-
Thu Sep 07 2006 Peter Jones <pjones@redhat.com> - 5.1.11-1
- Pull in bdevid properly (not two sources any more)
- Lots of minor bugfixes, leak fixups, etc.
- Updates for new iScsi userland (katzj)
- ata and usb device id probes in bdevid
- preliminary work for boot-time device identification.
- Fixes for network driver selection (katzj)
-
Sat Sep 02 2006 Peter Jones <pjones@redhat.com> - 5.1.10-1
- Fix %setup args
- Work around lvm locking problems when clvm is installed (#203904)
- Work around lvm segfault by always using lvm.static
- Fix label scanning on dm devices (based on a patch from Hans de Goede)
(#204763)
- handle the /proc/bus/usb mounting with a state machine in the module
loading emission, not with a sentinal value
- do forced finding of devices *after* auto-detection of the root fs, so
we're not blindsided by bogus scsi_hostadapter aliases and the like.
- move nashDm* functions to libnash so stuff in block.c can call them.
-
Wed Aug 30 2006 David Cantrell <dcantrell@redhat.com> - 5.1.9-2
- BuildRequires parted-devel >= 1.7.1-15
-
Fri Aug 18 2006 Peter Jones <pjones@redhat.com> - 5.1.9-1
- Fix "MOUNT_PROC_USB" warning
-
Thu Aug 17 2006 Peter Jones <pjones@redhat.com> - 5.1.8-1
- Use modprobe to find module deps (#202559, #202596)
- Fix typo for /dev/efirtc (#202110)
-
Thu Aug 17 2006 Peter Jones <pjones@redhat.com> - 5.1.7-1
- Make "stabilized" work better (patch from Alexandre Oliva)
- Rewrite usb handling (notting and pjones)
- Fix libbdevid provides/obsoletes.
- Include usb hcd drivers by default
-
Tue Aug 15 2006 Bill Nottingham <notting@redhat.com> - 5.1.6-1
- don't make every root device /dev/loop0. Eep.
-
Tue Aug 15 2006 Peter Jones <pjones@redhat.com> - 5.1.5-1
- Provide libbdevid.
-
Tue Aug 15 2006 Peter Jones <pjones@redhat.com> - 5.1.4-1
- Fix requires for libbdevid
- Make it safe to call nashLogger and nashLoggerV with no context.
-
Tue Aug 15 2006 Mark McLoughlin <markmc@redhat.com> - 5.1.3-2
- Fix compile error
-
Sat Aug 12 2006 Bill Nottingham <notting@redhat.com> - 5.1.3-1
- replace various sed/grep/cut/head calls with bash & awk equivalents
- fix a typo
- nfs loop fixes
- silence xen errors when sysfs layout is different
-
Thu Jul 27 2006 Peter Jones <pjones@redhat.com> - 5.1.2-1
- pull in new libbdevid for scsi probing fix
- restructure package so things can include libbdevid (and its modules)
without depending on python
-
Thu Jul 20 2006 Bill Nottingham <notting@redhat.com>
- support for loopback root (including loop-over-NFS)
-
Wed Jul 19 2006 Jeremy Katz <katzj@redhat.com> - 5.1.1-1
- build with -fPIC
- pull in new libbdevid for linking fix
-
Tue Jul 18 2006 Jeremy Katz <katzj@redhat.com> - 5.1.0-1
- allow rootdev/rootfs/rootopts parsing on the mkinitrd command line (notting)
- fix case where we'd spin forever resolving a device (#199046)
-
Fri Jul 14 2006 Peter Jones <pjones@redhat.com> - 5.0.47-1
- add libbdevid
- fix mode handling on open syscall wrapper (patch from Mark McLoughlin)
- save dhcp lease file after network initialization (patch from markmc)
-
Fri Jul 07 2006 Bill Nottingham <notting@redhat.com>
- if NFS host doesn't resolve, assume it's an IP
- make sure IP check doesn't get extraneous info
-
Thu Jul 06 2006 Peter Jones <pjones@redhat.com>
- make libnash.a and the nash-devel package
- use libdhcp instead of pump (patch from Mark McLoughlin)
-
Sat Jul 01 2006 Jeremy Katz <katzj@redhat.com> - 5.0.46-1
- if we don't get a modalias for a net driver, try via
ethtool (notting, #196104)
- add patches from Aron Griffis (aron AT hp DOT com) for multiboot
support on ia64
-
Fri Jun 23 2006 Jeremy Katz <katzj@redhat.com> - 5.0.45-1
- don't emit <empty> for iscsi username/password stuff
- handle _netdev option for filesystems
-
Fri Jun 23 2006 Jeremy Katz <katzj@redhat.com> - 5.0.44-1
- fix so we only use iscsistart if we're doing root on iscsi
- fix spurious shell error (noticed by karsten)
-
Thu Jun 22 2006 Jeremy Katz <katzj@redhat.com> - 5.0.43-1
- Add back patches from pjones which had just been in the package for
* fix bad shell code to detect DMs in use
* fix "stabilized" to stat where appropriate
* use stabilized for sbp2
-
Thu Jun 22 2006 Jeremy Katz <katzj@redhat.com> - 5.0.42-1
- add a hack to handle xennet devices not having a modalias (#196104)
- initial pass at support for root on iscsi (patch from Patrick
Mansfield <patmans@us.ibm.com>)
-
Tue Jun 13 2006 Peter Jones <pjones@redhat.com>
- Fixes for stateless/diskless configurations (patch from Jeff Law,
<law@redhat.com>)
-
Thu May 25 2006 Peter Jones <pjones@redhat.com> - 5.0.41-1
- (very) basic multipath support
- minor fixes for usb
-
Fri May 19 2006 Jeremy Katz <katzj@redhat.com> - 5.0.40-1
- fix multiple netdev handling (#192321)
-
Thu May 11 2006 Peter Jones <pjones@redhat.com> - 5.0.39-1
- handle [eou]hci_hcd even _more_ correctly ;)
-
Wed May 10 2006 Peter Jones <pjones@redhat.com> - 5.0.38-1
- handle bringing up multiple network devices (katzj)
- make "withusb=yes" default
- add --without-usb
- make usb load [euo]hci_hcd correctly
-
Tue May 02 2006 Jeremy Katz <katzj@redhat.com> - 5.0.37-1
- munge rootopts on all non-nfs cases
-
Thu Apr 27 2006 Bill Nottingham <notting@redhat.com> - 5.0.36-1
- NFS root fixes
- fix typo
-
Tue Apr 11 2006 Peter Jones <pjones@redhat.com> - 5.0.34-1
- fix "!" handling for sysfs paths in mkblkdevs
- fix argument checking for mknodCommand
-
Fri Mar 31 2006 Peter Jones <pjones@redhat.com> - 5.0.33-1
- fix unbalanced pushd in mkinitrd (patch from Pete Zaitcev, bz# 185822)
- add "cond" command for simple conditionals (bz# 182938)
- add "status" command to see/set the exit status for testing
- add "--remove-args" and "--update" args for new-kernel-pkg (patch from
Don Zickus, bz# 183917)
-
Tue Mar 14 2006 Peter Jones <pjones@redhat.com> - 5.0.32-1
- handle sd_mod on scsi_mod in findmodule, not in the scsi setup. This
fixes the "no scsi_hostadapter" alias problem better (#182008).
-
Sat Mar 11 2006 Peter Jones <pjones@redhat.com> - 5.0.31-1
- add segv handler for nash
-
Thu Mar 09 2006 Peter Jones <pjones@redhat.com> - 5.0.30-1
- move blkid.tab* references to /etc/blkid/blkid.tab*
- don't do the selinux context stuff on blkid.tab*, as it now inherits from
the directory.
-
Tue Feb 28 2006 Peter Jones <pjones@redhat.com> - 5.0.29-1
- Fix pump-devel buildrequires
- Fix grubby's getpathbyspec() usage (#183010)
- Fix grubby's makefile
- Make readlink command work with super scary huge sysfs paths (#183091)
- Make readlink handle directories better (#166666)
- Don't create ramdisk blockdevs, mkblkdevs does it (#181873)
- Don't use showlabels to resolve labels, use resolveDevice so we don't
need messy awk (#180372)
-
Sat Feb 25 2006 Peter Jones <pjones@redhat.com> - 5.0.28-1
- Make /dev/efirtc on ia64 boxes (#182598)
- Handle selinux contexts on /etc/blkid.tab* since we can't do it in
libblkid.
- Make building from the "nash" subdir work again
- Make getpathbyspec() allocate on the caller's stack, eliminating
several memory leaks in callers.
- Don't strip nash
-
Thu Feb 23 2006 Peter Jones <pjones@redhat.com> - 5.0.27-1
- Fix multiboot argument quoting in new-kernel-package (#182243)
- Fix "netlink" fd error in hotplug initialization.
- Fix directory creation in smartmknod()
- Fix find command when it's not run alone (#181874, patch from Mark
McLoughlin)
- Don't use 0-length uuids
- Update /dev/mapper nodes more often
- Allow dm partadd not to include the /dev/mapper path
- Use /etc/fstab, not /fstab, so if you've got /sbin/mount it'll work
- Bring in sd_mod if libata or scsi_mod is selected (#181983)
- use -Wl,--wrap,open and __wrap_open() instead of coeOpen()
-
Thu Feb 16 2006 Peter Jones <pjones@redhat.com> - 5.0.26-1
- fix detection of floppy devices, don't probe them for labels
- fix grubby to use the same label scanning code as nash
- senseless rewriting of makefiles so that grubby can use nash's .o's, uh,
"more easily".
-
Wed Feb 15 2006 Peter Jones <pjones@redhat.com> - 5.0.25-1
- rework hotplug control fds (#181515)
-
Wed Feb 15 2006 Peter Jones <pjones@redhat.com> - 5.0.24-1
- use the right nash-dm command to get the device list
- check if a subdevice has the same partition table, not if it starts
at the right place (fixes partition comparison on !mirror devices)
-
Tue Feb 14 2006 Peter Jones <pjones@redhat.com> - 5.0.23-1
- add basic hotplug handler and firmware loader
-
Tue Feb 14 2006 Jesse Keating <jkeating@redhat.com> - 5.0.22-1.1
- rebump for build order issues during double-long bump
-
Sun Feb 12 2006 Peter Jones <pjones@redhat.com> - 5.0.22-1
- formatting cleanups
- prefix partition number with "p" for partitions on dmraid
- add support for disabling partitions which overlap with partitions on
dm devices.
- add multipath support
- fix dm creation ordering and partition detection
- add "network" command (katzj)
- add nfsroot support (katzj)
- put "showlabels" back into nash
-
Sat Feb 04 2006 Peter Jones <pjones@redhat.com> - 5.0.21-1
- add "mount -o bind" support and "mount --move" support (#109366, patch
from Kasper Dupont)
- add resolveDevice command, which cases down device labels.
- remove "findlodev" from the documentation (#178587)
- fix nash command name parsing bug (#178587)
- fix "find" argument parsing (#178587)
- add "find" handling for "-type d"
-
Fri Feb 03 2006 Peter Jones <pjones@redhat.com> - 5.0.20-1
- fix really dumb spec file mistake
- fix devno detection for /dev/root
- fix testdm check
-
Fri Feb 03 2006 Peter Jones <pjones@redhat.com> - 5.0.19-1
- mkinitrd: get resolve_dm_name() and get_numeric_dev() from initscripts
instead of a private copy
- add block.[ch]:
- move parse_sysfs_devnum(), sysfs_blkdev_probe(), and
mkpathbyspec() from nash.c
- add label/uuid/name lookups for block devices using libblkid
- add lib.[ch]:
- move makeFdCoe(), coeOpen(), coeFopen(), coeOpendir(), readFD(),
nashLoggerV(), nashLogger(), qprintf(), eprintf(), smartmknod(),
testing, quiet, reallyquiet from nash.c
- move nashDefaultLogger(), from dm.c
- move log enums and declarations from dm.h
- dm.c: add dm_finish(), which does dm_task_destroy() and then library cleanup
(solves an fd leak)
- remove linux_fs.h, mount_by_label.[ch], name_to_dev_t.[ch]
-
Wed Feb 01 2006 Peter Jones <pjones@redhat.com> - 5.0.18-1
- make mkinitrd discover dm uuids
- add uuid support to nash's "dm create" and "dm partadd"
- add nash command "dm get_uuid $NAME"
- add support for renamed dm raids
-
Wed Jan 04 2006 Peter Jones <pjones@redhat.com> - 5.0.17-1
- fix dm operations to create/remove device nodes during each change.
-
Wed Jan 04 2006 Peter Jones <pjones@redhat.com> - 5.0.16-1
- Hopefully fix raid autorun with a patch from Paul Flinders.
-
Tue Dec 20 2005 Peter Jones <pjones@redhat.com> - 5.0.15-1
- Don't open init's console with close-on-exec
-
Mon Dec 19 2005 Peter Jones <pjones@redhat.com> - 5.0.14-1
- Remove vestigial loopback support.
- Remove email addresses from man pages (which still need some work)
-
Sat Dec 17 2005 Jesse Keating <jkeating@redhat.com> - 5.0.13-1.1
- bump for gcc
-
Tue Dec 06 2005 Peter Jones <pjones@redhat.com> - 5.0.13-1
- Updates for gcc 4.1
-
Sun Nov 27 2005 Peter Jones <pjones@redhat.com> - 5.0.12-1
- Fix buildreq/req for dmraid on s390
- Typo fix from Alexandre Oliva
-
Tue Nov 22 2005 Peter Jones <pjones@redhat.com> - 5.0.11-1
- audit for open()s without appropriate closes()
- make new functions coeOpen(), coeFopen(), and coeOpendir(). These behave
like open(), fopen(), and opendir() except that they set any associated
file descriptors to close on exec().
- use them everywhere except where we open a console.
-
Fri Nov 18 2005 Peter Jones <pjones@redhat.com> - 5.0.10-1
- don't set up dmraids that aren't active in the initrd
-
Thu Nov 17 2005 Peter Jones <pjones@redhat.com> - 5.0.9-1
- dmraid support
-
Sat Oct 22 2005 Peter Jones <pjones@redhat.com> - 5.0.8-1
- don't clobber cmdline in mkrootdev (fixes runlevel selection)
-
Sat Oct 22 2005 Jeremy Katz <katzj@redhat.com> - 5.0.7-1
- fix new-kernel-pkg --multiboot=
-
Wed Oct 19 2005 <pjones@redhat.com> - 5.0.6-1
- make lvm work again
-
Tue Oct 18 2005 Peter Jones <pjones@redhat.com> - 5.0.5-1
- make PROBE, MODULES, and PREMODS load defaults from a config file
- get rid of support for not using a dynamic /dev
- add options to force device probes (for when PROBE is "no")
- consolidate some duplicate code paths
- make nash's otherCommand check PATH first and use what it finds there for
any commands it needs to run, unless the command starts with "nash-",
in which case the internal version is used unconditionally
- remove the symlink hack for setuproot/preswitchroot/switchroot
- wrap all the nash commands in mkinitrd with shell functions and use the
"nash-" varient.
- rework root fs creation so Jeremy can use the otherCommand feature
-
Sat Oct 08 2005 Peter Jones <pjones@redhat.com> - 5.0.4-1
- split switchroot into setuproot and switchroot, with presetuproot in
between
- make preswitchroot and setuproot execute through symlinks, so they may
be replaced by a second initramfs image
- add logic to mount filesystems specified in /etc/fstab.sys during setuproot
- general code cleanups
-
Sat Oct 01 2005 Peter Jones <pjones@redhat.com> - 5.0.3-1
- fix root dev discovery to give us "hda3" and such again, rather than
a full sysfs path
-
Fri Sep 30 2005 Peter Jones <pjones@redhat.com> - 5.0.2-1
- add error and quiet printf functions
- use them instead of testing quiet and typing stderr everywhere
- actually make _all_ errors use eprintf (and thus stderr)
- print strerror in errors instead of raw errno
- make "getKernelCmdLine use readFD
- make "getKernelArg" picky about if you've got the right command vs
just one that starts with the same string
- make "getKernelArg" handle "=" for you, so it either gives you the value
when there is one, '\0' when there's not and it's EOL, or whitespace.
- reformat some two-space-indent spots
- check for short reads in catCommand
- kill pivotroot
- cleaned up resume messages
- make mkrootdev use readFD
- combine mkdevies and makedevs into mkblkdevs, no longer
using /proc/partitions
- don't use callocs+memcpy/strcpy+strcat when we can use asprintf
- make setQuietCommand use getKenrelArg
- make runStartup use readFD
- patch from Alexandre Oliva to fix LVM-on-RAID1 /root and swap-on-LVM
(bz #169059)
- reorder device creation for easier maintenance create /dev/rtc
- change fixme comment about lvm vgs
- use cemit at some places we used a lot of emits before
- reorder device node creation for clarity
- use mkblkdevs instead of makedevs and mkdevices
- decouple loopback root and lvm
-
Thu Sep 29 2005 Peter Jones <pjones@redhat.com> - 5.0.1-1
- create /dev/rtc
- create /dev/tty, /dev/tty{0..11}, and /dev/ttyS{0..4}
- tweak the messages output in loud mode during device node creation
-
Wed Sep 28 2005 Peter Jones <pjones@redhat.com> - 5.0.0-1
- remove support for pivotroot
- remove support for non-initramfs initrds
- remove support for 2.4 kernels
- don't force scsi_mod before scsi modules; deps should bring it in.
same for "unknown"; it's not needed any more.
- lots of whitespace adjustment
- minor messaging changes
- no manual redirection to stderr or RCFILE, nor manual verbose checking
- in light of these changes and other planned changes, this is 5.0.0
-
Tue Sep 27 2005 Peter Jones <pjones@redhat.com> - 4.2.24-1
- Fix module discovery for raid (eleminates "find" warning as well)
-
Mon Sep 26 2005 Peter Jones <pjones@redhat.com> - 4.2.23-2
- Fix module discovery to not always use the modules /dev/hda1 requires
when using root-on-label.
- Put the lvm check after the raid check, so the raid check atually gets run.
-
Thu Sep 22 2005 Peter Jones <pjones@redhat.com> - 4.2.22-1
- Only scan appended kernel command line args for duplicates once.
- handle short reads correctly in nash's readFD
- use calloc for things instead of malloc, since we usually need zeroed memory
and we never memset
- use canonicalize_file_name instead of malloc+realpath
- honor quiet flag on suspend/resume
- autodetect storage drivers in mkinitrd
-
Tue Aug 16 2005 Peter Jones <pjones@redhat.com> - 4.2.21-1
- Fix a bug in switchroot's command line parsing (patch from mkj)
-
Sat Aug 13 2005 Jeremy Katz <katzj@redhat.com> - 4.2.20-1
- fix a buglet in root vg finding
- support resume with swsusp
-
Sat Aug 06 2005 Peter Jones <pjones@redhat.com> - 4.2.19-1
- Fix yaboot stanza placement with a patch from dwmw2 (#142346)
-
Thu Jul 21 2005 Bill Nottingham <notting@redhat.com> - 4.2.18-1
- since udev is not in use, don't require it or claim to be starting it
-
Sat Jun 25 2005 Peter Jones <pjones@redhat.com> - 4.2.17-1
- Don't use udev or udevstart in the initrd; it's trivial to do
all that work by looking for directories with "dev" nodes in sysfs
and making the device from the dirname using major/minor from "dev"
-
Tue Jun 07 2005 Peter Jones <pjones@redhat.com> - 4.2.16-1
- Add a patch from Jeff Layton to remove files from the initramfs
before executing the new init. (slightly modified, #153069)
-
Wed May 18 2005 Peter Jones <pjones@redhat.com> - 4.2.15-1
- Better init argument handling (don't mess up with serial console)
-
Wed May 11 2005 Peter Jones <pjones@redhat.com> - 4.2.14-1
- Better init argument handling (no uninitialized args)
-
Sat May 07 2005 Peter Jones <pjones@redhat.com> - 4.2.13-1
- allow for lvm VGs to be in the /dev/mapper/$VG-$LV format (#154767)
-
Thu May 05 2005 Peter Jones <pjones@redhat.com> - 4.2.12-1
- Don't copy "console=" arguments from /proc/cmdline to init
-
Thu May 05 2005 Peter Jones <pjones@redhat.com> - 4.2.11-1
- don't copy "rw" option into the initrd; use "ro" instead if it's
the only option.
- Don't print "unmounting old ..." messages in nash if we're set to quiet
-
Wed May 04 2005 Peter Jones <pjones@redhat.com> - 4.2.10-1
- set umask explicitly
-
Wed Apr 27 2005 Peter Jones <pjones@redhat.com> - 4.2.9-1
- invoke bash with "--norc" (#155986)
- use binary udevstart.static, not a symlink
- print exit status in nash when programs return an error
-
Wed Apr 06 2005 Peter Jones <pjones@redhat.com> - 4.2.8-1
- Don't consolidate duplicates in "--args" (#147222)
-
Thu Mar 31 2005 Peter Jones <pjones@redhat.com> - 4.2.7-1
- unmount what filesystems we can from the initramfs
- close appropriate files before spawning init
-
Thu Mar 24 2005 Peter Jones <pjones@redhat.com> - 4.2.6-1
- work correctly with "set -o noclobber"
- wait longer after modprobe of usb-storage
- fix a wrong error output file
-
Wed Mar 23 2005 Peter Jones <pjones@redhat.com> - 4.2.5-1
- handle mount-by-uuid for root correctly (##148756)
-
Fri Mar 18 2005 Peter Jones <pjones@redhat.com> - 4.2.4-1
- don't do vgmknodes at all for lvm
-
Wed Mar 16 2005 Peter Jones <pjones@redhat.com> - 4.2.3-1
- use --ignorelockingfailure with lvm commands in the initrd, and only
activate the volume / is on. (#151172)
-
Wed Mar 16 2005 Peter Jones <pjones@redhat.com> - 4.2.2-1
- Fix accidental formatting of data in grub.conf (#151118,
from proski@gnu.org)
-
Wed Mar 02 2005 Peter Jones <pjones@redhat.com> - 4.2.1-1
- typo fixes
- one missed gcc4 fix
-
Wed Mar 02 2005 Peter Jones <pjones@redhat.com> - 4.2.0.4-1
- fix gcc4 warnings/errors
- use -D_FORTIFY_SOURCE=2 wherever we don't use RPM_OPT_FLAGS
-
Sat Jan 22 2005 Peter Jones <pjones@redhat.com> - 4.2.0.3-1
- Make nash expand environment variables on command lines (#144474)
- Make nash check pids returned from wait*() (#145660)
-
Sat Jan 22 2005 Peter Jones <pjones@redhat.com> - 4.2.0.2-1
- Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a
patch from Kasper Dupont.
-
Wed Jan 19 2005 Jeremy Katz <katzj@redhat.com> - 4.2.0.1-1
- fix grubby tests to run on systems with /boot = /
-
Wed Jan 19 2005 Jeremy Katz <katzj@redhat.com> - 4.2.0-1
- grubby: add multiboot support for xen0
- new-kernel-pkg: likewise
-
Tue Dec 21 2004 Jeremy Katz <katzj@redhat.com> - 4.1.20-1
- grubby: fix mac yaboot.conf updating if magicboot line is present
-
Tue Nov 23 2004 Jeremy Katz <katzj@redhat.com> - 4.1.19-1
- remove use of dietlibc for nash
-
Thu Nov 04 2004 Jeremy Katz <katzj@redhat.com>
- handle machines with lots of disks in /proc/partitions (#137816)
-
Mon Oct 25 2004 Jeremy Katz <katzj@redhat.com>
- require cpio (#136814)
-
Mon Oct 18 2004 Jeremy Katz <katzj@redhat.com> - 4.1.18-1
- fix UPDATEDEFAULT with new-kernel-pkg (#135997)
-
Sat Oct 16 2004 Jeremy Katz <katzj@redhat.com> - 4.1.17-1
- run udevstart again instead of sleeping, this will ensure all
devices are created in all cases after modules have been
loaded (thanks to notting)
-
Sat Oct 16 2004 Jeremy Katz <katzj@redhat.com> - 4.1.16-1
- mkinitrd: Sleep briefly to let udev finish creating devices
-
Thu Oct 14 2004 Jeremy Katz <katzj@redhat.com> - 4.1.15-1
- new-kernel-pkg: set new kernels as default (#135161) when
a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
b) --package foo is passed in and foo matches DEFAULTKERNEL
in /etc/sysconfig/kernel
-
Fri Oct 01 2004 Jeremy Katz <katzj@redhat.com> - 4.1.14-1
- support changing root on the kernel command line with lvm (#133236)
-
Thu Sep 23 2004 Jeremy Katz <katzj@redhat.com> - 4.1.12-1
- update to work with udev 032, conflict with old udev
- if udev is present, use it. trying to avoid the use of udev if it's
installed is the road to things not working
-
Sat Sep 11 2004 Jeremy Katz <katzj@redhat.com> - 4.1.11-1
- more fixing
-
Thu Sep 09 2004 Jeremy Katz <katzj@redhat.com> - 4.1.10-1
- mkinitrd: mount tmpfs with the right permissions
-
Wed Sep 01 2004 Jeremy Katz <katzj@redhat.com> - 4.1.9-1
- mkinitrd: use tmpfs instead of ramfs for udev stuff
-
Sat Aug 28 2004 Jeremy Katz <katzj@redhat.com> - 4.1.8-1
- nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
-
Thu Aug 26 2004 Jeremy Katz <katzj@redhat.com> - 4.1.6-1
- nash: fix another off by one (#130987)
- nash: hack to fix ppc booting (#130928)
-
Thu Aug 26 2004 Karsten Hopp <karsten@redhat.com> - 4.1.5-1
- fix zfcp handling
-
Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.4-1
- nash: create raid device if needed (think udev) before calling
the raidautorun ioctl (#130561)
-
Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.3-1
- nash: make echo behavior consistent with other shells
- more fixes from Steve Grubb (#129673)
-
Tue Aug 24 2004 Karsten Hopp <karsten@redhat.de> 4.1.2-1
- mkinitrd: add support for zfcp devices (mainframe)
-
Fri Aug 20 2004 Jeremy Katz <katzj@redhat.com> - 4.1.1-1
- don't remove lost+found (#130327)
- don't try to mount/umount /sys on 2.4 (#130298)
-
Wed Aug 18 2004 Jeremy Katz <katzj@redhat.com> - 4.1.0-1
- mkinitrd: if using udev for the initrd, set things up appropriately
(based on patches from Harald Hoyer and Thomas Woerner)
- nash: support for echo -n
- nash: better error message on exec failures
- nash: exec udev if we're called as a hotplug handler
-
Tue Aug 17 2004 Jeremy Katz <katzj@redhat.com> - 4.0.6-1
- various fixes from a code review by Steve Grubb which should fix
some of the lingering problems (#129673)
- nash: warning fix from Michal Jaegermann (#129673)
- grubby: removal with (hd0,0)
-
Fri Aug 13 2004 Jeremy Katz <katzj@redhat.com> - 4.0.5-1
- nash: oops, let's try that again
-
Thu Aug 12 2004 Jeremy Katz <katzj@redhat.com> - 4.0.4-1
- nash: fix mounting by label in some cases (tracked down by
Erik Jacobson, #129581, #129673, #129667, #129635)
-
Wed Aug 11 2004 Jeremy Katz <katzj@redhat.com> 4.0.3-1
- grubby: more (hd0,0) support (#125156)
- mkinitrd.8: update manpage (#129585)
- nash: fix some warnings
-
Thu Aug 05 2004 Jeremy Katz <katzj@redhat.com> 4.0.2-1
- nash: support bind mounting
- grubby: support the (hd0,0)/path syntax for kernels and initrds in
grub.conf (#114758, #125156, #120906)
-
Thu Aug 05 2004 Jeremy Katz <katzj@redhat.com> - 4.0.1-1
- improve handling of arguments to init with initramfs (#129057)
-
Tue Aug 03 2004 Jeremy Katz <katzj@redhat.com> - 4.0.0-1
- create an initramfs on 2.6 kernels instead of an initrd
- use new mount magic instead of pivot_root
on 2.6 kernels
- try to handle the case of modules going away on kernel upgrades a
little bit more nicely (#123994)
- avoid over-zealous creation of /dev/mapper/control (#127115)
- improve nash(8) manpage (#127413)
-
Sat Jun 19 2004 Jeremy Katz <katzj@redhat.com> - 3.5.24-1
- fix usb-storage detection with 2.6 (#126309)
-
Wed May 19 2004 Jeremy Katz <katzj@redhat.com> - 3.5.23-1
- add support for RAID6
-
Thu May 13 2004 Jeremy Katz <katzj@redhat.com>
- add support for multipath personality from Tom Callaway (#120379)
-
Fri May 07 2004 Jeremy Katz <katzj@redhat.com> - 3.5.22-1
- bump initrd size (#122325)
-
Thu Apr 15 2004 Jeremy Katz <katzj@redhat.com> - 3.5.21-1
- new-kernel-package: add patch from Ryan Tilder to allow setting new
kernel as default (#117605)
- mkinitrd: i2o_pci isn't in 2.6 (#120827)
- new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4
on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the
vmlinux from 2.4) (#120868)
-
Wed Apr 14 2004 Jeremy Katz <katzj@redhat.com> - 3.5.20-1
- mkinitrd: minor regex fix for some kernel names (#120624)
-
Tue Feb 10 2004 Jeremy Katz <katzj@redhat.com> - 3.5.19-1
- nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes
to work with it
- mkinitrd: add lxo's patch for copying lvm.conf (#112099)
- new-kernel-pkg: allow specifying the banner used in the boot loader config
on the command line (#114809)
-
Wed Jan 14 2004 Jeremy Katz <katzj@redhat.com>
- mkinitrd: add patch from Alex Kiernan for modules with multiple
deps in 2.6 (#113306)
-
Fri Jan 09 2004 Jeremy Katz <katzj@redhat.com> 3.5.18-1
- new-kernel-pkg: add a --kernel-arguments option (#113125)
-
Wed Jan 07 2004 Jeremy Katz <katzj@redhat.com>
- fix ybin path (#112939)
-
Mon Jan 05 2004 Jeremy Katz <katzj@redhat.com> 3.5.17-1
- mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
- nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
- mkinitrd: determine kernel version and adjust modulefile appropriately
so that we look at /etc/modprobe.conf for 2.6 kernels
- mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade
-
Thu Dec 25 2003 Jeremy Katz <katzj@redhat.com>
- mkinitrd: quiet strip by default
-
Tue Dec 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.16.1-1
- make stripping less aggressive
-
Tue Dec 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.16-1
- fixing handling of non-lvm case when /dev/mapper/control isn't present
- add patch from Al Viro to get root dev in numeric form by grokking sysfs
-
Wed Dec 10 2003 Jeremy Katz <katzj@redhat.com>
- strip modules if /usr/bin/strip exists (#111756)
-
Sat Dec 06 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-2
- require lvm2 so that it gets installed early enough
-
Sat Dec 06 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-1
- mkinitrd: add support for lvm2 (note: will not currently handle being
on a running 2.4 kernel and installing 2.6 with lvm rootfs)
-
Thu Dec 04 2003 Jeremy Katz <katzj@redhat.com>
- nash: add mkdmnod for creating the device-mapper control node
-
Fri Oct 03 2003 Jeremy Katz <katzj@redhat.com> 3.5.14-1
- fix dependency on /usr/bin/tail and /usr/bin/id
-
Wed Oct 01 2003 Florian La Roche <Florian.LaRoche@redhat.de>
- remove one more mktemp dir for "all loopback devices in use" case
-
Wed Sep 24 2003 Jeremy Katz <katzj@redhat.com> 3.5.13-1
- fix getting modules from /lib/modules/$(uname -r)/updates
-
Tue Sep 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.12-1
- argument checking and usage for /sbin/installkernel (#103109)
-
Thu Sep 04 2003 Jeremy Katz <katzj@redhat.com> 3.5.11-1
- really only do grub configs on grub arches
- some usb mkinitrd fixes
-
Sat Aug 30 2003 Jeremy Katz <katzj@redhat.com> 3.5.10-1
- clean up bogus warning in installkernel
- only try to do grub configs on arches which support grub (#103261)
-
Fri Aug 08 2003 Matt Wilson <msw@redhat.com> 3.5.9-1
- add \n to error messages in grubby
- NUL terminate buffer returned from readlink properly
- symlinks are most likely relative, chdir to / before trying to
follow them
- yaboot needs boot prefix
- silo needs boot prefix too
-
Thu Jul 31 2003 Jeremy Katz <katzj@redhat.com>
- grubby: don't segfault on label=\n (reported by dburcaw)
-
Fri Jul 25 2003 Jeremy Katz <katzj@redhat.com>
- grubby: patch from zaitcev for uninitialized variable that can get
hit in the zipl case
-
Tue Jul 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.8-1
- bump initrd size (#99525)
-
Thu Jul 10 2003 Jeremy Katz <katzj@redhat.com> 3.5.7-1
- pick modules from /lib/modules/$(uname -r)/updates first
- be less confused by more than one module of a name
-
Thu Jun 26 2003 Jeremy Katz <katzj@redhat.com> 3.5.6-1
- unbreak reading module options from modules.conf again (#97982)
-
Sat Jun 21 2003 Bill Nottingham <notting@redhat.com> 3.5.5-1
- fix modules.dep usage for 2.5/2.6
-
Sat Jun 21 2003 Jeremy Katz <katzj@redhat.com> 3.5.4-1
- handle more bizarre modules.conf constructs (notting)
-
Fri Jun 13 2003 Jeremy Katz <katzj@redhat.com> 3.5.3-1
- mkinitrd: fix copying of pvs (#97314, #97289)
- mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work
better on other arches
- mkinitrd: better check for dasd existence
- mkinitrd: make certain lvm-mod is included if root on lvm
-
Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.2-1
- mkinitrd: revert use of modprobe -c. it breaks in the installer when we
don't have a modules.dep for the BOOT kernel
- nash: return pivot_root call correctly (#97753)
-
Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.1-1
- nash: fix syscall bits with gcc 3.3 on s390
- new-kernel-pkg: do depmod before mkinitrd (#97218)
-
Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.0-1
- mkinitrd: add patch from gc@mandrakesoft.com to determine module
deps from modules.dep (#87873)
- tweak patch to not break weird cases where module deps aren't all
you need :/
- grubby: don't remove the last kernel (#60041)
- mkinitrd: use modprobe -c to find module options (#89794)
-
Wed May 21 2003 Matt Wilson <msw@redhat.com> 3.4.52-1
- use addSystemMap to build the image for iSeries (#91187)
-
Sat May 17 2003 Jeremy Katz <katzj@redhat.com> 3.4.51-1
- grubby: error out gracefully if we run out of space (#85424)
- mkinitrd: copy parent dirs for pvs (#88962)
- mkinitrd: exit with an exit status if tar fails (#90123)
- new-kernel-pkg: only use the first entry for / (#90155)
- grubby: fix a buffer overflow (#90444)
-
Thu May 01 2003 Jeremy Katz <katzj@redhat.com> 3.4.50-1
- fix typo in new-kernel-pkg for iSeries
-
Thu May 01 2003 Elliot Lee <sopwith@redhat.com>
- BuildRequires: popt
- Change grubby Makefile to static-link popt a bit more cleanly
-
Fri Apr 25 2003 Jeremy Katz <katzj@redhat.com> 3.4.49.1-1
- use Arjan's suggestion of vmlinitrd for the kernel + initrd combo file
-
Fri Apr 25 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
- fix description referencing /etc/conf.modules (#89558)
-
Fri Apr 25 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
- require ppc64-utils on ppc
-
Sat Apr 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-1
- new-kernel-pkg: on iSeries, we don't have a boot loader, just make the
kernel + initrd combo file (/boot/vmlinux-version.img)
-
Tue Apr 08 2003 Karsten Hopp <karsten@redhat.com> 3.4.48-1
- Fix segfault on mainframe
-
Thu Mar 27 2003 Jeremy Katz <katzj@redhat.com> 3.4.47-1
- mkinitrd: fix using options for loading modules
- mkinitrd: don't use kernel parameters for dasd at mkinitrd time,
use what's in modules.conf
-
Tue Mar 25 2003 Jeremy Katz <katzj@redhat.com> 3.4.46-1
- new-kernel-pkg: add necessary bits for s390, some logic cleanups
- grubby: fix root detection for s390{,x}
-
Mon Mar 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.45-1
- grubby: add silo support (sparc)
- grubby: add zipl support (s390{,x})
- add grubby test cases for zipl support
-
Thu Mar 20 2003 Jeremy Katz <katzj@redhat.com> 3.4.44.1-1
- fix dasd option reading
-
Sat Mar 15 2003 Phil Knirsch <pknirsch@redhat.com> 3.4.44
- Added automatic dasd= parameters for kernel parameter on s390(x).
-
Wed Mar 05 2003 Jeremy Katz <katzj@redhat.com> 3.4.43-1
- apply ppc patches for new-kernel-pkg and installkernel from Dan
Burcaw <dburcaw@terrasoftsolutions.com>
- man page tweak (#85471)
-
Wed Feb 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.42-1
- grubby: fix segfault from uninitialized variable (#84128)
-
Wed Feb 12 2003 Jeremy Katz <katzj@redhat.com> 3.4.41-1
- nash: add readlink
- use readlink for rootdev to handle symlinks to root devs (#83391)
-
Wed Feb 05 2003 Jeremy Katz <katzj@redhat.com> 3.4.40-1
- fix i2o module ordering (#83447)
- ifarch'd build requires of dietlibc now that the build system has a way to
handle these
-
Sun Feb 02 2003 Florian La Roche <Florian.LaRoche@redhat.de>
- change one test from a number to a string test that could otherwise
fail in not properly setup chroot environments
-
Sat Feb 01 2003 <ewt@redhat.com>
- added support for yaboot
- test script runs tests for all platforms
- separated elilo configuration from lilo mode, allowing elilo specific
tests to be run on any platform
-
Mon Jan 27 2003 <ewt@redhat.com>
- grubby now shortens lilo titles to ensure they are less then 16 characters
long (76236)
- mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
all raid devices listed in /proc/mdstat (82209)
- use product name from /etc/redhat-release to generate label in grub.conf
(82352)
-
Tue Jan 21 2003 Bill Nottingham <notting@redhat.com> 3.4.36-1
- don't error out running awk on /proc/mdstat if /proc/mdstat isn't
there
-
Wed Jan 15 2003 <ewt@redhat.com>
- all mkdev() actions will create directories as needed (some code in
mkdevices is now obsolete; I'll remove it later) (#73317)
- added mkdev command to test the above
- support diratime/nodiratime mount options (#78738)
- grubby will follow symlinks when writing new config file (#78713)
- don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
both mkinitrd and grubby
-
Mon Jan 06 2003 Jeremy Katz <katzj@redhat.com> 3.4.34-1
- grubby: fix segfault finding default if default doesn't have a root= (#66000)
- don't include usb modules by default. pass --with-usb to get usb modules
- make sure kudzu exists before trying to exec it
- handle multiple scsi hosts being present (#77422)
- add /usr/sbin to default path (#79581)
- fix using --builtin= (#80448)
- grubby: preserve the mode on config files (#80776)
-
Tue Dec 17 2002 Jeremy Katz <katzj@redhat.com>
- errno fixes
-
Wed Dec 04 2002 Florian La Roche <Florian.LaRoche@redhat.de>
- /sbin/new-kernel-pkg: fix a test to have correct ""
-
Sat Nov 23 2002 Jeremy Katz <katzj@redhat.com>
- mkinitrd: more gzipped module fixes
-
Fri Nov 22 2002 Jeremy Katz <katzj@redhat.com>
- mkinitrd: add support for finding gzipped modules
- mkinitrd: don't be noisy if we don't have lvm-mod loaded
-
Thu Nov 07 2002 Jeremy Katz <katzj@redhat.com>
- grubby: don't bail when looking for root in appends of lilo-style configs
- include grubby on x86_64
-
Fri Sep 27 2002 Nalin Dahyabhai <nalin@redhat.com>
- fix some syntax errors
- use grep's -q flag to save a redirect in places where we're not redirecting
stderr
-
Fri Sep 06 2002 Jeremy Katz <katzj@redhat.com>
- grubby could segfault by going into its lilo checking if it couldn't find
a default to copy (default had no root= and --bad-image-okay wasn't
being used)
-
Tue Sep 03 2002 Jeremy Katz <katzj@redhat.com>
- nash: create directories if needed in mkdevices command (#73090)
- grubby: handle lilo case of non-linux default (#72202)
-
Sun Sep 01 2002 Jeremy Katz <katzj@redhat.com>
- grubby: fix for case like 'append = " hdc=ide-scsi "' (#68802)
-
Sat Aug 31 2002 Bill Nottingham <notting@redhat.com>
- fix firewire stuff (#72916)
-
Sat Aug 24 2002 Bill Nottingham <notting@redhat.com>
- fix mpt fusion stuff
-
Wed Aug 14 2002 Jeremy Katz <katzj@redhat.com>
- /boot/efi/redhat -> /boot/efi/EFI/redhat on ia64
-
Mon Aug 12 2002 Jeremy Katz <katzj@redhat.com>
- fix grubby to work correctly on ia64
-
Fri Aug 09 2002 Michael Fulbright <msf@redhat.com>
- added sleep command to nash and fixed creating initrd with / or /boot on usb
-
Wed Jul 31 2002 Jeremy Katz <katzj@redhat.com>
- grubby: adding kernels to lilo.conf when not using root=LABEL will work
now too
-
Sat Jul 27 2002 Erik Troan <ewt@redhat.com>
- didn't close /proc/partitions in mkdevices
-
Fri Jul 26 2002 Jeremy Katz <katzj@redhat.com>
- grubby: fix adding kernels to lilo when using root=LABEL
-
Thu Jul 25 2002 Erik Troan <ewt@redhat.com>
- added and used mkdevices command (68959)
-
Thu Jul 18 2002 Erik Troan <ewt@redhat.com>
- do proper probing to check root=LABEL
- --bootloader-probe didn't support /etc/sysconfig/grub
-
Sat Jul 13 2002 Erik Troan <ewt@redhat.com>
- don't sanity check root=LABEL right now; probing might make sense?
-
Thu Jul 11 2002 Erik Troan <ewt@redhat.com>
- --ifneeded is obsolete; we always need initrds
- grubby lets you specify multiple indexes for --info
- grubby lets you select kernels by title
- added showlabels to nash
- new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
- new-kernel-pkg removes all entries w/ a duplicate label (67459)
-
Tue Jul 09 2002 Erik Troan <ewt@redhat.com>
- usb root device code could fail, causing no initrd to be made
-
Fri Jun 28 2002 Erik Troan <ewt@redhat.com>
- grubby didn't add new kernels properly
-
Fri Jun 28 2002 Erik Troan <ewt@redhat.com>
- support root on usb devices
-
Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
- other= in lilo.conf wasn't being parsed out properly
-
Tue Jun 25 2002 Erik Troan <ewt@redhat.com>
- changed --add-kernel implementation so that --args gets handled properly
-
Mon Jun 24 2002 Erik Troan <ewt@redhat.com>
- added loadinitrd (used by mkbootdisk) on ia32 and sparc
- modules "off" and "null" should be ignored (67086)
- mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
works again (fully determined by root= kernel parameter)
- added --update-kernel and --remove-args arguments to grubby
- kernel specification of ALL supported by grubby
- DEFAULT accepted much more consistently
- grubby --info displays info on all kernels specified, not just the first
- ext3 need mbcache now (67354)
- grubby allows config file entry numbers to be used as kernel paths
- support /etc/sysconfig/grub.conf
- display lba info from lilo.conf file in --info
-
Fri Jun 14 2002 Jeremy Katz <katzj@redhat.com>
- don't run lilo twice on kernel removal in new-kernel-pkg
- don't run grubby to add/remove kernels from new-kernel-pkg if
bootloader config doesn't
-
Wed Jun 12 2002 Erik Troan <ewt@redhat.com>
- added --bootloader-probe to grubby
- wrote a man page for grubby
- include grubby on ia64
- updated new-kernel-pkg to work with lilo/elilo
- added --info=DEFAULT option
-
Tue Jun 11 2002 Jeremy Katz <katzj@redhat.com>
- start raid before lvm so that you can have root on lvm on raid (#66175)
-
Wed Jun 05 2002 Erik Troan <ewt@redhat.com>
- failed to initialize a variable in grubby
-
Sat Jun 01 2002 Erik Troan <ewt@redhat.com>
- added --grub option so grub tests could run on ia64
- added some basic tests of lilo default directive handling
-
Thu May 30 2002 Jeremy Katz <katzj@redhat.com>
- require lvm
-
Wed May 29 2002 Bill Nottingham <notting@redhat.com>
- fix umounting of /initrd when pivoting
-
Wed May 29 2002 Erik Troan <ewt@redhat.com>
- marked /sbin/installkernel as %config (53006)
- run make test during build
-
Thu May 23 2002 Erik Troan <ewt@redhat.com>
- added --nopivot (53679)
- honor INSTALL_PATH in installkernel (32833)
- installkernel versions old kernels as well (52756)
- lilo support added to grubby
-
Wed May 22 2002 Erik Troan <ewt@redhat.com>
- cleaned up usage message
- added --omit-lvm-modules to man page
- added --builtin option (65250)
- skip comments in fstab (65249)
- added findlodev to nash, use that to pick block device (63421)
- support -o option in nash's mount (59185)
- look for xfs_dmapi (60066)
- added > support for executed commands (61180)
- grubby copies permissions from old config file (59227)
- use options from fstab for root filesystem (56071)
- try and be better about returning nonzero on error (60203)
- make modprobe symlink properly to avoid kernel message (62145)
- support linear raid (12775)
- support fallback option in grub config (54794)
- comments in template entries not handled quite right (65198)
-
Sun Apr 21 2002 Erik Troan <ewt@redhat.com>
- grubby does a better job of not adding superfluous default= lines
-
Thu Apr 18 2002 Erik Troan <ewt@redhat.com>
- preload works again
-
Thu Apr 11 2002 Jeremy Katz <katzj@redhat.com>
- revert to not mounting by label
-
Sat Apr 06 2002 Jeremy Katz <katzj@redhat.com>
- include pbrown's changes to load parport_pc when needing ppa.o (#35360)
-
Fri Apr 05 2002 Jeremy Katz <katzj@redhat.com>
- fix redirection bug (#62623)
- create proper link of /sbin->/bin in initrd (#62199)
-
Fri Mar 29 2002 Jeremy Katz <katzj@redhat.com>
- prereq dev package so that we always have the dev package before we get run
-
Sat Mar 23 2002 Jeremy Katz <katzj@redhat.com>
- duh, that won't work. fix it
- don't require lvm tools right now
-
Fri Mar 22 2002 Jeremy Katz <katzj@redhat.com>
- fix nash to create directories for devices like cciss and ida
-
Wed Feb 06 2002 Bill Nottingham <notting@redhat.com>
- run mkinitrd with -f in new-kernel-pkg
- don't run lilo in /sbin/installkernel
-
Sat Feb 02 2002 Jeremy Katz <katzj@redhat.com>
- require lvm
-
Fri Feb 01 2002 Jeremy Katz <katzj@redhat.com>
- clean up warnings for when /proc isn't mounted
-
Wed Jan 30 2002 Jeremy Katz <katzj@redhat.com>
- fix probing for LVM usage to require a volume group to exist before adding
the module
- --omit-lvm-modules will omit LVM modules
- add support for root device being LVM
-
Thu Jan 17 2002 Erik Troan <ewt@redhat.com>
- look for a non /tmpfs directory
- added support for xfs
- use with raid md.o if it exists
- fixed bug in echo
- use find form nash rather then /usr (mkinitrd shouldn't need /usr
mounted)
-
Sat Jan 12 2002 Erik Troan <ewt@redhat.com>
- added support for mounting root filesystem by label
- switched to dietlibc from minilibc
- fix so --preload= works [33675,57560,44377]
- added info on --image-version and --nocompress to man page [57560]
- set fileystem check interval to 0 in case the system clock
is borked [51454]
- give a proper error when run by a user other then root [27218,53159]
- grubby statically linked against popt [55305]
- cleaned up verbose output a bit [21791]
-
Wed Dec 19 2001 Trond Eivind Glomsrød <teg@redhat.com>
- Add LVM module when LVM is used
-
Thu Sep 06 2001 Jeremy Katz <katzj@redhat.com>
- grubby shouldn't blow away default=saved lines (#52981)
-
Sat Sep 01 2001 Jeremy Katz <katzj@redhat.com>
- fix new-kernel-pkg --mkinitrd for ia64
-
Fri Aug 31 2001 Erik Troan <ewt@redhat.com>
- fixed bug handling invalid default (MF #52889)
- in some cases we would set the default to point at a removed image
-
Thu Aug 30 2001 Erik Troan <ewt@redhat.com>
- minor grubby fixes
-
Wed Aug 29 2001 Jeremy Katz <katzj@redhat.com>
- let new-kernel-pkg be able to do more (initrds, modules.*)
- include grubby only on x86
-
Tue Aug 28 2001 Jeremy Katz <katzj@redhat.com>
- more grubby fixups for having a /boot
- added new-kernel-pkg
-
Mon Aug 27 2001 Erik Troan <ewt@redhat.com>
- added grubby
- added installkernel
-
Sat Aug 04 2001 Matt Wilson <msw@redhat.com>
- make consoles with the correct minor numbers
- applied patch from hjl to fix fstab parsing (#50819)
-
Sat Jul 21 2001 Jeremy Katz <katzj@redhat.com>
- skip errors finding jbd as a module if we're skipping them trying to find
ext3 so that you can build a kernel with ext3 built-in and still use an
initrd
-
Thu Jul 12 2001 Bill Nottingham <notting@redhat.com>
- don't print errors if /etc/raidtab doesn't exist
- or /etc/{modules.conf,conf.modules}, for that matter
-
Sat Jul 07 2001 Matt Wilson <msw@redhat.com>
- don't dig through /etc/fstab to find out if we have a filesystem on
a RAID device, it's usually mounted by label so /dev/mdN isn't there
at all (#46525)
-
Wed Jun 27 2001 Bill Nottingham <notting@redhat.com>
- require filesystem >= 2.1.0, otherwise we don't boot
-
Fri Jun 22 2001 Erik Troan <ewt@redhat.com>
- added a bunch of commands to nash
- use pivot_root
- support ext3
-
Sat Jun 09 2001 Florian La Roche <Florian.LaRoche@redhat.de>
- delete the exclusivearch line completely
-
Sat Mar 24 2001 Matt Wilson <msw@redhat.com>
- reset the state of findmodule after getting the modules we need
-
Thu Mar 01 2001 Matt Wilson <msw@redhat.com>
- changed the Requires on mktemp from >= 1.5 to >= 1.5-5 (which included
-d support) (#30127)
-
Sat Feb 24 2001 Erik Troan <ewt@redhat.com>
- let nash be invoked as modprobe to avoid a modprobe failure to exec
- nash will try to run arbitrary commands now (removing insmod as a special
case)
-
Tue Feb 13 2001 Matt Wilson <msw@redhat.com>
- add findutils to Requires line (#27269)
-
Fri Feb 09 2001 Matt Wilson <msw@redhat.com>
- added checks to load the modules i2o_block needs
-
Thu Feb 08 2001 Bill Nottingham <notting@redhat.com>
- fix utterly broken build
-
Thu Feb 01 2001 Helge Deller <hdeller@redhat.com>
- added mandir to nash Makefile (RH 6.x compatibility)
-
Wed Jan 31 2001 Erik Troan <ewt@redhat.com>
- added dependency on mktemp
-
Fri Jan 26 2001 Erik Troan <ewt@redhat.com>
- we need to insert xor.o before raid5.o
-
Thu Jan 25 2001 Matt Wilson <msw@redhat.com>
- code in RAID_AUTORUN ioctl fallback
- fixed raidstart check flag from -z to -n
-
Wed Jan 24 2001 Erik Troan <ewt@redhat.com>
- switched to using nash from sash
-
Wed Jan 24 2001 Matt Wilson <msw@redhat.com>
- added patch from twaugh to avoid blindly adding scsi_mod
and sd_mod to initrd if they are not needed (#24114)
-
Fri Jan 12 2001 Bernhard Rosenkraenzer <bero@redhat.com>
- Enlarge initrds, needed for systems with both IDE and SCSI
(Bug #23846)
- Version 2.[6789] probably shouldn't identify itself as 2.6
with --version. ;)
- bzip2 source
-
Thu Dec 21 2000 Erik Troan <ewt@redhat.com>
- let the kernel autoload ide-cd
-
Sat Dec 09 2000 Erik Troan <ewt@redhat.com>
- added modular ide support
-
Thu Aug 31 2000 Nalin Dahyabhai <nalin@redhat.com>
- use mktemp to create temporary files and directories
-
Sun Aug 06 2000 Erik Troan <ewt@redhat.com>
- changes from Keith Owens for 2.4
-
Wed Jul 05 2000 Matt Wilson <msw@redhat.com>
- build on alpha
-
Tue Jun 27 2000 Bill Nottingham <notting@redhat.com>
- ignore 'unknown' aliases (they shouldn't be there anyways)
-
Fri Jun 02 2000 Bill Nottingham <notting@redhat.com>
- build on ia64
- bump up initrd size on ia64
- modules.confiscation, /usr/man -> /usr/share/man
-
Wed May 03 2000 Nalin Dahyabhai <nalin@redhat.com>
- make RPM pick up man page, regardless of compression
-
Wed Mar 01 2000 Matt Wilson <msw@redhat.com>
- add requirement for /sbin/losetup
-
Tue Feb 08 2000 Matt Wilson <msw@redhat.com>
- gzip manpage
-
Fri Feb 04 2000 Matt Wilson <msw@redhat.com>
- gzip manpage
-
Tue Jan 11 2000 Erik Troan <ewt@redhat.com>
- use sash, not ash
-
Tue Jan 04 2000 Matt Wilson <msw@redhat.com>
- use ash.static for /bin/sh, not sash
-
Sun Jan 02 2000 Erik Troan <ewt@redhat.com>
- configure loopback devices
-
Wed Sep 29 1999 Bill Nottingham <notting@redhat.com>
- sparc fixup from jakub
-
Thu Sep 23 1999 Michael K. Johnson <johnsonm@redhat.com>
- fix cleanup (blush!)
-
Wed Sep 22 1999 Michael K. Johnson <johnsonm@redhat.com>
- now works when /usr is not mounted (do not rely on /usr/bin/install)
- slight cleanups, better usage message
-
Fri Jul 30 1999 Michael K. Johnson <johnsonm@redhat.com>
- Now automatically includes necessary raid modules
- --omit-raid-modules now omits raid modules
- tiny doc updates
-
Fri Jul 30 1999 Bill Nottingham <notting@redhat.com>
- updates from bugzila (#4243, #4244)
-
Sun Mar 28 1999 Matt Wilson <msw@redhat.com>
- --omit-scsi-modules now omits all scsi modules
- updated documentation
- mkinitrd now grabs scsi_hostadapter modules from anywhere -
some RAID controller modules live in block/
-
Fri Feb 26 1999 Matt Wilson <msw@redhat.com>
- updated description
-
Tue Jan 12 1999 Matt Wilson <msw@redhat.com>
- Ignore the absence of scsi modules, include them if they are there, but
don't complain if they are not.
- changed --no-scsi-modules to --omit-scsi-modules (as it should have been)
-
Fri Nov 06 1998 Jeff Johnson <jbj@redhat.com>
- import from ultrapenguin 1.1.
-
Wed Oct 21 1998 Jakub Jelinek <jj@ultra.linux.cz>
- fix for combined sparc/sparc64 insmod, also pluto module is really
fc4:soc:pluto and we don't look at deps, so special case it.
-
Sun Aug 30 1998 Erik Troan <ewt@redhat.com>
- replaced --needs-scsi-mods (which is now the default) with
--omit-scsi-mods
-
Sat Aug 08 1998 Jeff Johnson <jbj@redhat.com>
- correct obscure regex/shell interaction (hardwires tabs on line 232)
-
Tue Jan 13 1998 Erik Troan <ewt@redhat.com>
- added 'make archive' rule to Makefile
- rewrote install procedure for more robust version handling
- be smarter about grabbing options from /etc/conf.modules
-
Tue Oct 21 1997 Erik Troan <ewt@redhat.com>
- made it use /bin/ash.static
-
Thu Apr 17 1997 Erik Troan <ewt@redhat.com>
- Only use '-s' to install binaries if /usr/bin/strip is present.
- Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
- Don't use "mount -o loop" anymore -- losetup the proper devices manually
- Requires losetup, e2fsprogs
-
Thu Mar 13 1997 Michael K. Johnson <johnsonm@redhat.com>
- Fixed a bug in parsing options.
- Changed to use a build tree, then copy the finished tree into the
image after it is built.
- Added patches derived from ones written by Christian Hechelmann which
add an option to put the kernel version number at the end of the module
name and use install -s to strip binaries on the fly.