-
Wed Dec 07 2011 Tianyue Lan <tianyue.lan@oracle.com> - libvirt-0.9.4-23.0.1.el6
- Replace docs/et.png in tarball with blank image
-
Wed Nov 09 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-23.el6
- Revert "Set qemu migration speed unlimited when migrating to file" (rhbz#751900)
-
Mon Nov 07 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-22.el6
- conf: Don't free uninitialized pointer (rhbz#751287)
-
Wed Nov 02 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-21.el6
- docs: Document managed=yes of hostdev passthrough (rhbz#740686)
- ServerClient: Flush cached data (rhbz#748025)
-
Wed Oct 26 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-20.el6
- qemu: Avoid leaking uninit data from hotplug to dumpxml (rhbz#747516)
- storage: Plug iscsi memory leak (rhbz#747516)
-
Wed Oct 19 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-19.el6
- snapshot: Detect when qemu lacks disk-snapshot support (rhbz#747115)
-
Mon Oct 17 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-18.el6
- virDomainCoreDump: Introduce VIR_DUMP_RESET flag (rhbz#632498)
- qemu: Implement VIR_DUMP_RESET (rhbz#632498)
- qemu: Check for domain being active on successful job acquire (rhbz#745734)
- Set to NULL members that have been freed to prevent crashes (rhbz#746075)
- virFDStream: Close also given errfd (fd leak) (rhbz#746075)
- qemu: Silence Coverity false positive (rhbz#739704)
- command: Avoid fd leak on failure (rhbz#739704)
- build: Add compiler attributes to virUUIDParse (rhbz#739704)
- qemu: Check for json allocation failure (rhbz#739704)
- qemu: Fix text block info parsing (rhbz#739704)
- storage: Plug memory leak on error (rhbz#739704)
- conf: Plug memory leak on error (rhbz#739704)
- qemu: Plug memory leak on migration (rhbz#739704)
- macvtap: Plug memory leak for 802.1Qbh (rhbz#739704)
- macvtap: Avoid invalid free (rhbz#739704)
- Update to require sanlock 1.8 for license compliance (rhbz#739518)
- events: Propose a separate lock for event queue (rhbz#743817)
- util: Make getaddrinfo failure nonfatal in virGetHostname (rhbz#738915)
- qemu: Make sure BeginJob is always followed by EndJob (rhbz#746268)
- pci: Fix pciDeviceListSteal on multiple devices (rhbz#733587)
- qemu: Do not reattach PCI device used by other domain when shutdown (rhbz#733587)
- qemu: Honor the orginal PCI dev properties when reattaching (rhbz#736214)
- daemon: Always advertise libvirtd service (rhbz#726616)
-
Wed Oct 12 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-17.el6
- Fix deadlock when the RPC program is unknown (rhbz#743843)
- qemuDomainAttach: Initialize pidfile variable (rhbz#744548)
- storage: Do not use comma as seperator for lvs output (rhbz#727474)
- snapshot: Avoid accidental renames with snapshot-edit (rhbz#744724)
-
Fri Oct 07 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-16.el6
- qemu: Enable multifunction for older qemu (rhbz#738388)
- qemu: Don't fail virDomainGetInfo if we can't update balloon info (rhbz#741217)
- qemu: Leave rerror policy at default when enospace is requested (rhbz#730909)
- snapshot: Fix virsh error message typo (rhbz#735457)
- snapshot: Let virsh edit disk snapshots (rhbz#744071)
- snapshot: Simplify redefinition of disk snapshot (rhbz#744071)
-
Fri Oct 07 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-15.el6
- Add virFileLock and virFileUnlock APIs (rhbz#728153)
- Move pidfile functions into util/virpidfile.{c, h} (rhbz#728153)
- Introduce functions for checking whether a pidfile is valid (rhbz#728153)
- Add some APIs which use locking for crashsafe pidfile handling (rhbz#728153)
- Convert libvirtd to use crash-safe pidfile APIs (rhbz#728153)
- build: Fix recent build failures (rhbz#728153)
- daemon: Don't remove pidfiles in init scripts (rhbz#728153)
- daemon: Modify init script to detect upstart managed libvirtd (rhbz#728153)
- qemu: Check for outstanding async job too (rhbz#742277)
- qemu: Make PCI multifunction support more manual (rhbz#727530)
- network: Fill in bandwidth from portgroup for all forward modes (rhbz#743176)
- snapshot: Refactor virsh snapshot parent computation (rhbz#742410)
- snapshot: Better virsh handling of missing current, parent (rhbz#742410)
- qemu: Fix migration with dname (rhbz#740533)
- qemu: Correct misspelled 'enospc' option, and only use for werror (rhbz#730909)
- snapshot: Add REVERT_FORCE to API (rhbz#742615)
- snapshot: Use qemu-img on disks in use at time of snapshot (rhbz#742615)
- snapshot: Enforce REVERT_FORCE on qemu (rhbz#742615)
- init: Raise default system aio limits (rhbz#740899)
-
Thu Sep 29 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-14.el6
- Fix synchronous reading of stream data (rhbz#741337)
- qemu: Add ability to set PCI device "rombar" on or off (rhbz#738095)
- virsh: Better document --copy-storage migrate options (rhbz#677220)
- virsh: Enhance documentation of commands starting jobs (rhbz#705237)
- qemu: Always remove domain object if MigratePrepare fails (rhbz#741251)
- security: Properly chown/label bidirectional and unidirectional fifos (rhbz#740478)
- qemu: Check domain status details when reconnecting monitor (rhbz#617890)
- qemu: Finish domain shutdown on reconnect (rhbz#617890)
- qemu: Avoid loop of fake reboots (rhbz#617890)
- qemu: Preserve fakeReboot flag in domain status (rhbz#617890)
- snapshot: Fix man page typos (rhbz#740686)
- docs: Document virsh nodedev-* commands (rhbz#740686)
- docs: Document node device XML (rhbz#740686)
- qemu: Add return value check (rhbz#739704)
- qemu: Check for ejected media during startup and migration (rhbz#725673)
- virsh: Update man page for cpu_shares parameter (rhbz#639591)
- virsh: Describe attach-interface parameter target (rhbz#698899)
-
Mon Sep 26 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-13.el6
- Fix crash on events due to allocation errors (rhbz#737881)
- remote: Fix crash on OOM (rhbz#737881)
- Fix persistent migration config save (rhbz#738148)
- qemu: Transfer inactive XML among cookie (rhbz#738148)
- storage: Ensure the device path exists before refreshing disk pool (rhbz#611442)
- Store max migration bandwidth in qemuDomainObjPrivate struct (rhbz#740099)
- Save migration speed in qemuDomainMigrateSetMaxSpeed (rhbz#740099)
- Set qemu migration speed unlimited when migrating to file (rhbz#740099)
- Use max bandwidth from qemuDomainObjPrivate struct when migrating (rhbz#740099)
- build: Silence warning on 32-bit build (rhbz#740099)
- conf: Assign newDef of active domain as persistent conf if it is NULL (rhbz#728428)
- qemu: Avoid dereferencing a NULL pointer (rhbz#739704)
- sanlock: Fix memory leak (rhbz#739704)
- virsh: Fix regression in argv parsing (rhbz#740168)
- snapshot: Fix logic bug in qemu undefine (rhbz#735457)
- snapshot: Prepare to remove transient snapshot metadata (rhbz#735457)
- snapshot: Remove snapshot metadata on transient exit (rhbz#735457)
- snapshot: Also delete empty directory (rhbz#735457)
- virsh: Do not ignore the specified flags for cmdSaveImageDefine (rhbz#740508)
- selinux: Correctly report warning if virt_use_nfs not set (rhbz#589922)
- qemu: Properly hot-unplug drives (rhbz#696596)
-
Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-12.el6
- selinux: Detect virt_use_nfs boolean set (rhbz#589922)
- virnetsocket: Pass KRB5CCNAME env variable (rhbz#737176)
- snapshot: Fix double free of qemuImgBinary (rhbz#737010)
- qemu_api: Modify apibuild.py to generate docs for QEMU APIs (rhbz#736040)
- qemu_api: Update Makefile for subdir docs (rhbz#736040)
- qemu_api: Add comments for API virDomainQemuMonitorCommand (rhbz#736040)
- qemu_api: Add override XML and C files for QEMU APIs (rhbz#736040)
- qemu_api: Update Py binding generator to generate files for QEMU APIs (rhbz#736040)
- qemu_api: Update Makefile to generate libvirtmod_qemu lib (rhbz#736040)
- qemu_api: Update libvirt spec file (rhbz#736040)
- Remove two references to files not generated (rhbz#736040)
- qemu_api: Doc improvements (rhbz#736040)
- python: Fix libvirt.py generation to include virterror info (rhbz#736040)
- snapshot: New APIs for inspecting snapshot object (rhbz#735457)
- snapshot: Use new API for less work (rhbz#735457)
- snapshot: ABI stability must include memory sizing (rhbz#735553)
- spec: Require augeas for sanlock (rhbz#738314)
- sanlock: Add missing test command in virt-sanlock-cleanup.in (rhbz#738534)
- snapshot: Tweak snapshot-create-as diskspec docs (rhbz#738411)
- qemu: Hold conn open for all threads started by qemuProcessReconnectAll (rhbz#738778)
- rpc: Convert unknown procedures to VIR_ERR_NO_SUPPORT (rhbz#738439)
- Prevent crash from dlclose() of libvirt.so (rhbz#739167)
- doc: Add statment about permissions needed to do a core dump (rhbz#738146)
- snapshot: Affect persistent xml after disk snapshot (rhbz#738676)
- snapshot: Allow disk snapshots of qcow2 disks (rhbz#738676)
- qemu: Prevent disk corruption on domain shutdown (rhbz#734773)
- qemu: Introduce shutdown reason for paused state (rhbz#734773)
- qemu: Fix shutoff reason when domain crashes (rhbz#739641)
- qemu: Properly detect crash of a rebooted domain (rhbz#739641)
- qemu: Avoid memory leak (rhbz#739704)
- remote: Avoid memory leak (rhbz#739704)
- util: Avoid memory leak (rhbz#739704)
- Fix memory leak parsing 'relabel' attribute in domain security XML (rhbz#739704)
- Don't leak memory if a cgroup is mounted multiple times (rhbz#739704)
- network: Eliminate potential memory leak on parse failure (rhbz#739704)
- virsh: doc: Fix supported driver types for attach-disk command (rhbz#738970)
- Do not log invalid operations in libvirtd logs (rhbz#590807)
-
Thu Sep 08 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-11.el6
- blockinfo: Fix qemu regression in handling disk name (rhbz#736603)
- doc: Fix incorrect option in send-key (rhbz#736297)
- virsh: Fix typo in opts_send_key (rhbz#736297)
- rpc: Avoid memory leak on virNetTLSContextValidCertificate (rhbz#735650)
- tests: Avoid memory leak on testTLSSessionInit (rhbz#735650)
- qemu: Fix seamless SPICE migration with older qemu (rhbz#730753)
- snapshot: Fix regression with system checkpoints (rhbz#736682)
-
Wed Sep 07 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-10.el6
- virterror: Fix error message for VIR_ERR_INVALID_ARG (rhbz#689388)
- remote: Refuse connecting to remote socket (rhbz#689388)
- Threadpool: Initialize new dynamic workers (rhbz#692663)
-
Tue Sep 06 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-9.el6
- adds a missing patch in previous build (rhbz#735498)
-
Tue Sep 06 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-8.el6
- qemu: Fix a regression of domain save (rhbz#735011)
- virsh: Improve send-key documentation (rhbz#699847)
- start: Allow discarding managed save (rhbz#730750)
- virsh: Support 'virsh start --force-boot' on older servers (rhbz#730750)
- maint: Fix comment typos (rhbz#730750)
- qemu: Refactor file opening (rhbz#730750)
- qemu: Detect incomplete save files (rhbz#730750)
- virsh: Avoid memory leak on cmdVolCreateAs (rhbz#735008)
- snapshot: Fix corner case on OOM during creation (rhbz#674537)
- Ensure stream is aborted when exiting console (rhbz#731673)
- following for (rhbz#731583, rhbz#731579, rhbz#731584, rhbz#731673):
- Ensure client streams are closed when marking a client for close
- Fix race condition in abort of stream
- Tweak debugging message in RPC client code
- Don't attempt to read from a stream if it is closed
- Ensure async packets never get marked for sync replies
- Ignore unused streams in virStreamAbort
- rpc: Don't close connection if program is unknown
- rpc: Fix a typo in debugging log in virNetServerProgramSendStreamData
- stream: Remove redundant reference to client while sending stream data
- Fix memory leak dispatching domain events
- Avoid use-after-free on streams, due to message callbacks
- Fix tracking of RPC messages wrt streams
- Fix parted sector size assumption (rhbz#735441)
- Fix incorrect path length check in sanlock lockspace setup (rhbz#735443)
- Fix sanlock socket security labelling (rhbz#735442)
- Remove bogus virSecurityManagerSetProcessFDLabel method (rhbz#735442)
- security: Fix build (rhbz#735442)
- Fix keymap used to talk with QEMU (rhbz#632499)
- virsh: Fix snapshot-create-as to handle arbitrary names (rhbz#735495)
- virsh: Add virsh snapshot-current --name (rhbz#735495)
- virsh: Add snapshot-parent (rhbz#735495)
- virsh: Don't reject undefine on active domain (rhbz#735495)
- virsh: Fix logic bug (rhbz#735495)
- virsh: Fix dead store (rhbz#735495)
- virsh: Tweak misleading wording (rhbz#735495)
- virsh: Concatenate qemu-monitor-command arguments (rhbz#735495)
- maint: Treat more libxml2 functions as free-like (rhbz#735495)
- xml: Add another convenience function (rhbz#735495)
- maint: Simplify lots of libxml2 clients (rhbz#735495)
- virsh: Add list --managed-save (rhbz#735495)
- virsh: Prefer unsigned flags (rhbz#735495)
- snapshot: Add snapshot-list --parent to virsh (rhbz#735495)
- qemu: Allow to undefine a running domain (rhbz#735498)
- test: Allow to undefine a running domain (rhbz#735498)
- build: Fix typo in recent test patch (rhbz#735498)
- test: Rewrite test to match change in behavior (rhbz#735498)
- virsh: Properly interleave shared stdout and stderr (rhbz#735498)
- snapshot: Better events when starting paused (rhbz#733762)
- snapshot: Fine-tune ability to start paused (rhbz#733762)
- snapshot: Expose --running and --paused in virsh (rhbz#733762)
- snapshot: Fine-tune qemu saved images starting paused (rhbz#733762)
- snapshot: Improve reverting to qemu paused snapshots (rhbz#733762)
- snapshot: Properly revert qemu to offline snapshots (rhbz#733762)
- snapshot: Fine-tune qemu snapshot revert states (rhbz#733762)
- snapshot: Properly revert qemu to offline snapshots (rhbz#733762)
- snapshot: Fine-tune qemu snapshot revert states (rhbz#733762)
- snapshot: Speed up snapshot location (rhbz#733529)
- snapshot: Avoid crash when deleting qemu snapshots (rhbz#733529)
- snapshot: Track current domain across deletion of children (rhbz#733529)
- snapshot: Simplify acting on just children (rhbz#733529)
- snapshot: Allow deletion of just snapshot metadata (rhbz#735457)
- snapshot: Let qemu discard only snapshot metadata (rhbz#735457)
- snapshot: Identify which snapshots have metadata (rhbz#735457)
- snapshot: Reflect new dumpxml and list options in virsh (rhbz#735457)
- snapshot: Identify qemu snapshot roots (rhbz#735457)
- snapshot: Allow recreation of metadata (rhbz#735457)
- snapshot: Refactor virsh snapshot creation (rhbz#735457)
- snapshot: Improve virsh snapshot-create, add snapshot-edit (rhbz#735457)
- snapshot: Add qemu snapshot creation without metadata (rhbz#735457)
- snapshot: Add qemu snapshot redefine support (rhbz#735457)
- vbox, xenapi: Add virDomainUndefineFlags (rhbz#735457)
- snapshot: Prevent stranding snapshot data on domain destruction (rhbz#735457)
- snapshot: Teach virsh about new undefine flags (rhbz#735457)
- snapshot: Refactor some qemu code (rhbz#735457)
- snapshot: Cache qemu-img location (rhbz#735457)
- snapshot: Support new undefine flags in qemu (rhbz#735457)
- snapshot: Prevent migration from stranding snapshot data (rhbz#735457)
- snapshot: Refactor domain xml output (rhbz#735553)
- snapshot: Allow full domain xml in snapshot (rhbz#735553)
- snapshot: Correctly escape generated xml (rhbz#735553)
- snapshot: Update rng to support full domain in xml (rhbz#735553)
- snapshot: Store qemu domain details in xml (rhbz#735553)
- schedinfo: Update man page about virsh schedinfo command (unknown)
- snapshot: Additions to domain xml for disks (rhbz#638510)
- snapshot: Reject transient disks where code is not ready (rhbz#638510)
- snapshot: Introduce new deletion flag (rhbz#638510)
- snapshot: Expose new delete flag in virsh (rhbz#638510)
- snapshot: Allow halting after snapshot (rhbz#638510)
- snapshot: Expose halt-after-creation in virsh (rhbz#638510)
- snapshot: Support extra state in snapshots (unknown)
- snapshot: Add <disks> to snapshot xml (rhbz#638510)
- snapshot: Also support disks by path (rhbz#638510)
- snapshot: Add virsh domblklist command (rhbz#638510)
- snapshot: Add flag for requesting disk snapshot (rhbz#638510)
- snapshot: Wire up disk-only flag to snapshot-create (rhbz#638510)
- snapshot: Reject unimplemented disk snapshot features (rhbz#638510)
- snapshot: Make it possible to audit external snapshot (rhbz#638510)
- snapshot: Wire up new qemu monitor command (rhbz#638510)
- snapshot: Wire up live qemu disk snapshots (rhbz#638510)
- snapshot: Use SELinux and lock manager with external snapshots (rhbz#638510)
- daemon: Create priority workers pool (rhbz#692663)
- qemu: Introduce job queue size limit (rhbz#692663)
- qemu: Deal with stucked qemu on daemon startup (rhbz#692663)
-
Wed Aug 31 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-7.el6
- qemu: Properly label outgoing pipe for tunneled migration (rhbz#733998)
- snapshot: Forbid snapshot on autodestroy domain (rhbz#733806)
-
Fri Aug 26 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-6.el6
- daemon: Move TLS initialization to virInitialize (rhbz#732893)
- Fix command test wrt gnutls initialize & fix debugging (rhbz#732893)
- qemu: Init reattaching related members pciDevice before reattach (rhbz#728203)
- qemu: error if qemu monitor command not found for BlockJob (rhbz#727502)
- virsh: error if specified bandwidth is invalid for blockjob (rhbz#727502)
- util: Only fchown newly created files in virFileOpenAs (rhbz#534010)
- screenshot: Implement multiple screen support (rhbz#710489)
- security: Rename SetSocketLabel APIs to SetDaemonSocketLabel (rhbz#731243)
- security: Introduce SetSocketLabel (rhbz#731243)
- qemu: Correctly label migration TCP socket (rhbz#731243)
- snapshot: Don't leak resources on qemu snapshot failure (rhbz#733499)
- Fix memory leak while scanning snapshots (rhbz#674537)
- qemu: Minor formatting cleanup (rhbz#674537)
- Swap virDomain and virDomainSnapshot declaration (rhbz#674537)
- snapshot: Only pass snapshot to qemu command line when reverting (rhbz#674537)
- snapshot: Track current snapshot across restarts (rhbz#674537)
- send-key: Fix scan keycode map (rhbz#733597)
-
Mon Aug 22 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-5.el6
- patch problem for seamless SPICE migration (rhbz#730753)
- macvtap: Fix getPhysfn to get the PF of a direct attach network interface (rhbz#732082)
- SSL spice session can't be kept during migration (rhbz#729874)
- Storage driver should flush host cache after cloning volumes (rhbz#689416)
- Documentation for CFS bandwidth limiting cgroup (rhbz#692769)
- libvirt error message should show the uri content but not (null) (rhbz#730244)
- libvirtd.conf error causes libvirtd to exit silently (rhbz#728654)
-
Mon Aug 15 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-4.el6
- Bugfix: Check stdoutWatch before removing the handler. (rhbz#730600)
- daemon: Fix regression of libvirtd reloading support (rhbz#730428)
- libvirtd.init.in: Stop/restart() - wrong return value in case of failure (rhbz#730510)
- Add API for duplicating a socket/client file descriptor (rhbz#720269)
- Add backlog parameter to virNetSocketListen (rhbz#720269)
- Support changing UNIX socket owner in virNetSocketNewListenUNIX (rhbz#720269)
- qemu: Refactor do{Tunnel, Native}Migrate functions (rhbz#720269)
- qemu: Use virNetSocket for tunneled migration (rhbz#720269)
- qemu: Use fd: protocol for migration (rhbz#720269)
- qemu: Support event_idx parameter for virtio disk and net devices (rhbz#725448)
-
Mon Aug 15 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-3.el6
- Fix large files support (rhbz#728992)
- qemu: Avoid overwriting errors from virGetHostname (rhbz#729567)
- qemu: Fix -chardev udp if parameters are omitted (rhbz#689761)
- managedsave: Prohibit use on transient domains (rhbz#729714)
- nwfilter: Tolerate disappearing interfaces while instantiating filter (rhbz#729945)
- docs: Describe new virtual switch configuration in network XML docs (rhbz#643947)
- storage: Directory shouldn't be listed as type 'file' (rhbz#727088)
- virsh: Add dir type for listing volumes with vol-list (rhbz#727088)
- qemu: Avoid crash on process attach (rhbz#730615)
-
Tue Aug 09 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-2.el6
- daemon: Unlink unix socket paths on shutdown (rhbz#725702)
- rpc:Fix sasl session relocking intead of unlocking it (rhbz#729198)
- network: Eliminate lag in updating dnsmasq hosts files (rhbz#727982)
- Don't mount /dev for application containers (rhbz#728835)
- support connected parameter in set_password (rhbz#707212)
-
Wed Aug 03 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-1.el6
- Rebased to upstream 0.9.4 (rhbz#705814)
- The rebase also fixes the following bugs:
rhbz#634653, rhbz#707212, rhbz#722806, rhbz#723862, rhbz#726304,
rhbz#726398, rhbz#727047, rhbz#727094
-
Fri Jul 29 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc2.el6
- rebased to upstream 0.9.4 release candidate 2 (rhbz#705814)
- the rebase also fixes the following bugs:
rhbz#667624, rhbz#669586, rhbz#682084, rhbz#707155, rhbz#707212,
rhbz#725322, rhbz#725935, rhbz#725950
-
Fri Jul 29 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc1.1.el6
- add a fix for a refcounting bug leading to a crash (rhbz#723811)
-
Tue Jul 26 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc1.el6
- rebased to upstream 0.9.4 release candidate 1 (rhbz#705814)
- the rebase also fixes the following bugs:
rhbz#603039, rhbz#632499, rhbz#632760, rhbz#643947, rhbz#678027,
rhbz#697742, rhbz#697841, rhbz#704836, rhbz#707530, rhbz#720350,
rhbz#720889, rhbz#721335, rhbz#722862
-
Tue Jul 26 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-8.el6
- libvirt crash when running domains and vdsm is restarted (rhbz#723811)
- connect to hypervisor with unconfigured tls/tcp connection pbm (rhbz#723442)
- virsh list produced segmentation fault when libvirtd is not up (rhbz#723843)
- clientcert.pem validation failure cause libvirtd crash (rhbz#723881)
-
Wed Jul 20 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-7.el6
- Fix TLS certificate checking problems (rhbz#723447)
-
Wed Jul 20 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-6.el6
- Fix migration with TLS bugs (rhbz#722738 and rhbz#722748)
- assorted small fixes from upstream
-
Fri Jul 15 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-5.el6
- Fix migrating domain error (rhbz#721411)
-
Fri Jul 15 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-4.el6
- storage: Avoid memory leak on metadata fetching (rhbz#707155)
- graphics: Add support for action_if_connected in qemu (rhbz#707212)
- qemu: Save domain status ASAP after creating qemu process (rhbz#707894)
- bios: Add support for SGA (rhbz#711598)
- pci: Initialize state values on reattach (rhbz#713697)
- Keep consistence between code and doc on log level and usage (rhbz#716888)
-
Thu Jul 14 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-3.el6
- util: Avoid duplicating virFileOpenAsNoFork in virFileOpenAs (rhbz#707257)
-
Mon Jul 11 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-2.el6
- Fix mistaken order of server cert/key parameters in constructor (rhbz#719838)
- qemu: Don't chown files on NFS share if dynamic_ownership is off (rhbz#716478)
- util: Don't try to fchown files opened as non-root (rhbz#707257)
-
Mon Jul 04 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-1.el6
- Rebased to upstream 0.9.3 (rhbz#705814)
- The rebase also fixes the following bugs:
rhbz#591974, rhbz#632499, rhbz#641087, rhbz#664629, rhbz#679668,
rhbz#682121, rhbz#693648, rhbz#693650, rhbz#693661, rhbz#698340,
rhbz#698825, rhbz#698861, rhbz#701394, rhbz#707439, rhbz#707530,
rhbz#715355, rhbz#716826, rhbz#717203, rhbz#718143, rhbz#712050,
rhbz#715184
-
Thu Jun 30 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-0rc2.el6
- Rebased to upstream 0.9.3 prerelease 2 (rhbz#705814)
-
Mon Jun 20 2011 Daniel Veillard <veillard@redhat.com> - libvirt-0.9.2-1.el6
- Rebased to upstream 0.9.2 (rhbz#705814)
- The rebase also fixes the following bugs:
rhbz#569567, rhbz#691830, rhbz#607526, rhbz#609650, rhbz#632495,
rhbz#640603, rhbz#658713, rhbz#669549, rhbz#677229, rhbz#678548,
rhbz#640603, rhbz#682237, rhbz#683005, rhbz#684848, rhbz#688859,
rhbz#690695, rhbz#692355, rhbz#693203, rhbz#694516, rhbz#697650,
rhbz#698133, rhbz#702044, rhbz#704124, rhbz#704144, rhbz#705405,
rhbz#706869, rhbz#706883, rhbz#706966, rhbz#707173, rhbz#707257,
rhbz#707298, rhbz#709576, rhbz#709776, rhbz#710150, rhbz#711151
-
Thu May 19 2011 Jiri Denemark <jdenemar@redhat.com> - libvirt-0.9.1-1.el6
- Rebased to upstream 0.9.1 (rhbz#705814)
- The rebase also fixes the following bugs:
rhbz#587276, rhbz#591058, rhbz#592170, rhbz#598792, rhbz#673814,
rhbz#677228, rhbz#681458, rhbz#682237, rhbz#692745, rhbz#693932,
rhbz#694382, rhbz#695653, rhbz#698071, rhbz#698197, rhbz#698208,
rhbz#698490, rhbz#701305
-
Mon Apr 18 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-18.el6
- network: Fix NULL dereference during error recovery (rhbz#696660)
- virsh: Fix regression in parsing optional integer (rhbz#693963)
- util: Fix crash when removing entries during hash iteration (rhbz#693385)
- Experimental libvirtd upstart job (rhbz#678084)
-
Wed Apr 13 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-17.el6
- Don't return an error on failure to create blkio controller (rhbz#689030)
- Fix possible infinite loop in remote driver (rhbz#691514)
- qemu: Remove the managed state file only if restoring succeeded (rhbz#692998)
- docs: Tweak virsh restore warning (rhbz#692998)
-
Wed Apr 06 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-16.el6
- nwfilter: Enable rejection of packets (rhbz#681948)
- Revert all previous error log priority hacks (rhbz#587603)
- Filter out certain expected error messages from libvirtd (rhbz#587603)
- qemu: Unlock qemu driver before return from domain save (rhbz#688774)
- Do not send monitor command after monitor meet error (rhbz#688774)
- qemu: Ignore libvirt debug messages in qemu log (rhbz#681492)
- virsh: Fix memtune's help message for swap_hard_limit (rhbz#680190)
- virsh: Fix documentation for memtune command (rhbz#680190)
- docs: Fix typo (rhbz#680190)
- Fix typo in systemtap tapset directory name (rhbz#693701)
- qemu: Ignore unusable binaries (rhbz#676563)
- qemu: Support for overriding NPROC limit (rhbz#674602)
-
Tue Mar 29 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-15.el6
- Fix return value for virJSONValueFromString if it fails (rhbz#688723)
- Fix positioning to end of qemu log file (rhbz#689986)
- Initialization error of qemuCgroupData in Qemu host usb hotplug (rhbz#690183)
- 8021Qbh: Use preassociate-rr during the migration prepare stage (rhbz#684870)
- Make error reporting in libvirtd thread safe (rhbz#689374)
- Add missing dependencies (rhbz#690022)
- Fix restoring a compressed save image (rhbz#691034)
- Fix label restore bugs in qemu driver (rhbz#690737)
-
Tue Mar 22 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-14.el6
- Fix delayed events when SASL is active (rhbz#624252)
- Fix ref-counting bugs (rhbz#688774)
- Log an error if on failure to connect to netlink socket (rhbz#689001)
- Log error and abort network startup when radvd isn't found (rhbz#688957)
- Add PCI sysfs reset access rights to qemu (rhbz#689002)
- Fix regression with qemu:///session URI (rhbz#684655)
- Avoid leaking PCI config fd into qemu (rhbz#687993)
-
Wed Mar 16 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-13.el6
- Properly report error in virConnectDomainXMLToNative (CVE-2011-1146)
- Handle DNS over IPv6 (rhbz#687896)
- Start dnsmasq even if no dhcp ranges/hosts are specified (rhbz#687291)
- Use a separate dhcp leases file for each network (rhbz#687551)
- Fix a possible crash in storage driver (rhbz#684712)
-
Tue Mar 15 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-12.el6
- Fix vram settings for qxl graphics (rhbz#673578)
- Free stream when domain shuts down while its console is open (rhbz#682741)
- Use hardcoded python path in libvirt.py (rhbz#684204)
- Add missing checks for read only connections (CVE-2011-1146)
- Eliminate potential null pointer deref when auditing macvtap devices (rhbz#642785)
- Insert error messages to avoid a quiet abortion of commands (rhbz#605660)
-
Thu Mar 10 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-11.el6
- Support vram specification for qxl graphics (rhbz#673578)
- Fix parsing int options in virsh (rhbz#639587)
- Use -o encryption=on instead of -e for qemu-img (rhbz#676984)
- Support domain snapshots with current QMP (rhbz#589076)
- Update auditing support (rhbz#642785)
- Only request sound cgroup ACL when required (rhbz#680398)
- Allow fine-tuning of device ACL permissions (rhbz#683163)
- Support vhost in attach-interface (rhbz#683276)
- Don't request cgroup ACL access for /dev/net/tun (rhbz#683305)
-
Mon Mar 07 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-10.el6
- Fix deadlock caused by a fix for rhbz#670848
-
Fri Mar 04 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-9.el6
- Reorder nwfilter match extensions relative to state match (rhbz#678139)
- Avoid overwriting error message in qemu driver (rhbz#678870)
- Allow removing hash entries in virHashForEach (rhbz#681459)
- Avoid double close on qemu domain restore (rhbz#672725)
- Fix DomainObj refcounting/hashtable races in qemu driver (rhbz#670848)
- Fix several memory leaks (rhbz#682249)
-
Thu Feb 24 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-8.el6
- Fix --all flag of virsh freecell to really show all cells (rhbz#653530)
- Add txmode attribute to interface XML for virtio backend (rhbz#629662)
- Give each virtual network bridge its own fixed MAC address (rhbz#609463)
- Fix virsh snapshot-list with --quiet option (rhbz#678833)
- Delay IFF_UP'ing 802.1Qbh interface until migration final stage (rhbz#678826)
- Fix several memory bugs (rhbz#679164)
- Fix virt-pki-validate when CERTTOOL is missing (rhbz#679153)
- Fix memory corruption in virFileAbsPath (rhbz#680281)
-
Thu Feb 17 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-7.el6
- Properly escape special characters in domain names (rhbz#676908)
- Fix enum type declaration (rhbz#628940)
- Fix cleanup on VM state after failed QEMU startup (rhbz#673588)
- Fix XML generation for smartcards (rhbz#677308)
- Ignore failure of "qemu -M ?" on older qemu (rhbz#676563)
- Fix typo in setting up SPICE passwords (rhbz#677709)
- Avoid NULL dereference in virDomainMemoryStats (rhbz#677484)
- Avoid NULL dereference on error in qemu driver (rhbz#677493)
- Fix error message when saving a shutoff domain (rhbz#677547)
- Create enough volumes for mpath pool (rhbz#677231)
- Allow to delete device mapper disk partition (rhbz#611443)
-
Fri Feb 11 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-6.el6
- Fix typo in parsing of spice 'auth' data (rhbz#676374)
- Fix attach-interface regression (rhbz#676686)
- Block I/O tunables via blkio cgroups controller (rhbz#632492)
- Support SCSI RAID type & lower log level for unknown types (rhbz#675771)
- Only initialize/cleanup libpciaccess once (rhbz#675698)
- Imprint all logs with version + package build information (rhbz#673226)
-
Fri Feb 04 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-5.el6
- Docs for customizable x509 certificate paths for client (rhbz#629510)
- Fix tests for VNC over a unix domain socket (rhbz#651415)
- Fix problems with peer-to-peer migration (rhbz#673434)
- Fix tunneled migration broken since 0.8.7-2 (rhbz#672199)
- Update docs for cpu_shares setting (rhbz#641187)
- Fix possible hang if SASL is used (rhbz#672226)
- Cancel migration in progress when virsh gets Ctrl-C (rhbz#635353)
- Enhance virsh migrate command (rhbz#619039)
- Support for specifying AIO mode for qemu disks (rhbz#591703)
- Don't leave domain paused after restore (rhbz#670278)
- Fix possible deadlock/crash in qemu driver (rhbz#673588)
- Add shortcut for qemu HMP pass through (rhbz#628940)
- Fix error message when attach device fails (rhbz#675030)
- Support for booting from assigned PCI devices (rhbz#646895)
- Improve handling of unlimited value for memory tunables (rhbz#669069)
- Add smartcard support (rhbz#641834)
- Remove some RHEL-specific patches which are no longer required (rhbz#653985)
- Support for disabling/enabling KSM per domain (rhbz#635419)
- Add --all flag to virsh freecell command (rhbz#653530)
-
Thu Jan 27 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-4.el6
- Fix event-handling data race (rhbz#671567)
- Add support for VNC over a unix domain socket (rhbz#651415)
- Support intel 'ich6' model (rhbz#648486)
- Do not use virtio-serial port 0 for generic ports (rhbz#670394)
- Set SELinux context label of pipes used for qemu migration (rhbz#667756)
- Support customizable x509 certificate paths for client (rhbz#629510)
- Round up capacity for LVM volume creation (rhbz#670529)
- Show error prompt when trying to managed save a shutoff domain (rhbz#672449)
- Report more proper error for unsupported graphics (rhbz#671319)
- Expand the man page text for virsh setmaxmem (rhbz#622534)
- Fix event-handling allocation crash (rhbz#671564)
- Require --mac to avoid detach-interface ambiguity (rhbz#671050)
-
Thu Jan 20 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-3.el6
- Report error if invalid type specified for character device (rhbz#638968)
- Improve log for domain related APIs (rhbz#640202)
- Reject SDL graphic if it's not supported by qemu (rhbz#633326)
- Don't lose track of events when callbacks are slow (rhbz#624252)
- Fail if per-device boot is used but deviceboot is not supported (rhbz#670399)
- Avoid sending STOPPED event twice (rhbz#666158)
- Fix issues introduced by dependency patches for rhbz#646895
-
Mon Jan 17 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-2.el6
- Fix spec file which was not fully rebased to 0.8.7 (rhbz#653985, rhbz#660706)
- Skip IB700 watchdog device when assigning PCI slots (rhbz#667091)
- Improve error reporting when parsing dhcp info (rhbz#653300)
- Don't chown saved image back to root if dynamic_ownership=0 (rhbz#661720)
- Fix core dumps if unix_sock_group is set (rhbz#623166)
- Add support for Westmere CPU model (rhbz#656248)
- Add XML config switch to enable/disable vhost-net support (rhbz#643050)
- Enable tuning of qemu network tap device "sndbuf" size (rhbz#665293)
- Support for explicit boot device ordering (rhbz#646895)
- Avoid qemu holding migration fd indefinitely (rhbz#620363)
-
Sun Jan 09 2011 Jiri Denemark <jdenemar@redhat.com> - 0.8.7-1.el6
- Rebased to upstream 0.8.7 (rhbz#653985)
- The following bugs got fixed by the rebase:
rhbz#586124, rhbz#595350, rhbz#611793, rhbz#611822, rhbz#617439,
rhbz#620363, rhbz#626873, rhbz#627143, rhbz#628772, rhbz#639595,
rhbz#639603, rhbz#656795, rhbz#658657, rhbz#659855, rhbz#660706,
rhbz#664406, rhbz#665446
-
Thu Dec 23 2010 Jiri Denemark <jdenemar@redhat.com> - 0.8.6-1.el6
- Rebased to upstream 0.8.6 (rhbz#653985)
-
Fri Dec 10 2010 Jiri Denemark <jdenemar@redhat.com> - 0.8.1-29.el6
- spec file cleanups (rhbz#649523)
- Fix deadlock on concurrent multiple bidirectional migration (rhbz#659310)
- Fix funny error in clock-variable (rhbz#660194)
- Export host information through SMBIOS to guests (rhbz#526224)
- Ensure device is deleted from guest after unplug (rhbz#644015)
- Distinguish between QEMU domain shutdown and crash (rhbz#656845)
-
Mon Nov 29 2010 Jiri Denemark <jdenemar@redhat.com> - 0.8.1-28.el6
- Fix JSON migrate_set_downtime command (rhbz#561935)
- Make SASL work over UNIX domain sockets (rhbz#641687)
- Let qemu group look below /var/lib/libvirt/qemu/ (rhbz#643407)
- Fix save/restore on root_squashed NFS (rhbz#643884)
- Fix race on multiple migration (rhbz#638285)
- Export host information through SMBIOS to guests (rhbz#526224)
- Support forcing a CDROM eject (rhbz#626305)
-
Wed Aug 18 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-27
- build -26 hit a miscompilation error c.f. 624895 drop -j12
- Resolves: rhbz#620847
- Resolves: rhbz#623877
-
Tue Aug 17 2010 Dave Allan <dallan@redhat.com> - 0.8.1-26
- Fix problem with capabilities XML generation
- Resolves: rhbz#620847
- Correctly reserve and release PCI slots
- Resolves: rhbz#623877
-
Sun Aug 15 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-25
- fix PXE booting on the virtual network
- Resolves: rhbz#623951
- fix tunelled migration
- Resolves: rhbz#624062
-
Thu Aug 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-24
- do not call balloon info command if balloon is desactivated
- Resolves: rhbz#617286
-
Wed Aug 11 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-23
- give a way to desactivate memory balloon support
- Resolves: rhbz#617286
-
Tue Aug 10 2010 Dave Allan <dallan@redhat.com> - 0.8.1-22
- Mitigate asynchronous device_del
- Resolves: rhbz#609437
- Fix PCI address allocation
- Resolves: rhbz#618484
- Make nodeinfo skip offline CPUs
- Resolves: rhbz#622515
-
Tue Aug 03 2010 Dave Allan <dallan@redhat.com> - 0.8.1-21
- Fix multiple PCI device assignment bugs
- Resolves: rhbz#617116
- Fix the ACS checking in the PCI code
- Resolves: rhbz#615218
- Disable boot=on when not using KVM
- Resolves: rhbz#594068
- Don't leak delay string when freeing virInterfaceBridgeDefs
- Resolves: rhbz#620837
-
Wed Jul 28 2010 Dave Allan <dallan@redhat.com> - 0.8.1-20
- Fix error message in guests init script when libvirtd isn't installed
- Resolves: rhbz#617527
-
Tue Jul 27 2010 Dave Allan <dallan@redhat.com> - 0.8.1-19
- Add character device backend activating QEMU internal spice agent
- Resolves: rhbz#615757
- Make libvirt-guests initscript Fedora compliant
- Resolves: rhbz#617300
-
Thu Jul 22 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-18
- Fix patch for PIIX3 slot 1 reservation, in case it's already reserved
- Resolves: rhbz#592026
-
Wed Jul 21 2010 Dave Allan <dallan@redhat.com> - 0.8.1-17
- Set a stable & high MAC addr for guest TAP devices
- Resolves: rhbz#616517
- Fix bogus commit of -16 patches
- Related: rhbz#592026
- Related: rhbz#599590
-
Wed Jul 21 2010 Dave Allan <dallan@redhat.com> - 0.8.1-16
- Make PCI device ordering consistent with older releases
- Resolves: rhbz#592026
- Fix libvirtd hang during concurrent bi-directional migration
- Resolves: rhbz#599590
-
Wed Jul 14 2010 Dave Allan <dallan@redhat.com> - 0.8.1-15
- Add iptables rule to fixup DHCP response checksum
- Resolves: rhbz#612588
-
Tue Jul 13 2010 Dave Allan <dallan@redhat.com> - 0.8.1-14
- Support virtio disk hotplug in JSON mode
- Resolves: rhbz#573946
- Fix QEMU monitor JSON crash
- Resolves: rhbz#604585
- CVE-2010-2237 CVE-2010-2238 CVE-2010-2239
- Resolves: rhbz#607817
- CVE-2010-2242 Apply a source port mapping to virtual network masquerading
- Resolves: rhbz#608049
- Fix hang if QEMU exits (almost) immediately
- Resolves: rhbz#610056
- Support new CPU models provided by qemu-kvm
- Resolves: rhbz#605830
- Fix comparison of two host CPUs
- Resolves: rhbz#611401
- Don't mess with the CPU returned by arch driver
- Resolves: rhbz#613014
- Fail when CPU type cannot be detected from XML
- Resolves: rhbz#613760
- Use -nodefconfig when probing for CPU models
- Resolves: rhbz#613764
- cpuCompare: Fix crash on unexpected CPU XML
- Resolves: rhbz#613765
- Properly report failure to create raw storage volume files
- Related: rhbz#547543
- Fix IOErrorReasonCallback python bindings
- Related: rhbz#586353
- Parthelper: canonicalize block device paths
- Related: rhbz#593785
-
Wed Jun 30 2010 Dave Allan <dallan@redhat.com> - 0.8.1-13
- Don't invoke destroy callback from qemuMonitorOpen() failure paths (v2)
- Related: rhbz#609060
-
Tue Jun 29 2010 Dave Allan <dallan@redhat.com> - 0.8.1-12
- Don't invoke destroy callback from qemuMonitorOpen() failure paths
- Resolves: rhbz#609060
- virFileResolveLink: guarantee an absolute path
- Resolves: rhbz#608092
- SPICE patches have translatable strings without format args
- Resolves: rhbz#608917
- No way to pass disk format type to pool-define-as nor pool-create-as
- Resolves: rhbz#597790
- Fix enforcement of direction of traffic for rules describing incoming traffic
- Resolves: rhbz#606889
- Clarify virsh help pool-create-as text
- Resolves: rhbz#609044
-
Mon Jun 28 2010 Dave Allan <dallan@redhat.com> - 0.8.1-11
- Do not block during incoming migration
- Resolves: rhbz#579440
- Label serial devices
- Resolves: rhbz#585249
- parthelper: fix compilation without optimization
- Related: rhbz#593785
- Fix name/UUID uniqueness checking in storage/network
- Resolves: rhbz#593951
- Don't squash file permissions when migration fails
- Resolves: rhbz#607922
- Properly handle 'usbX' sysfs files
- Resolves: rhbz#603867
- add pool support to vol-key command & improve vol commands help
- Resolves: rhbz#598365
- document attach-disk better
- Resolves: rhbz#601143
- Config iptables to allow tftp port if network <tftp> element exists
- Resolves: rhbz#607294
- Fix failure to generate python bindings when libvirt.h.in is updated
- Related: rhbz#589465
- Allow all interface names
- Resolves: rhbz#593907
- Fix nodedevice refcounting
- Resolves: rhbz#608753
- Move nwfilter functions inside extern C and fix a locking bug
- Resolves: rhbz#597391
- Fix failure to restore qemu domains with selinux enforcing
- Resolves: rhbz#590975
- Check for presence of qemu -nodefconfig option before using it
- Resolves: rhbz#608859
-
Mon Jun 21 2010 Dave Allan <dallan@redhat.com> - 0.8.1-10
- Add multiIQN XML output
- Resolves: rhbz#587700
- Fix udev node device parent-child device relationships
- Resolves: rhbz#593995
- Fix leaks in udev device add/remove
- Resolves: rhbz#595490
- Fix device destroy return value
- Resolves: rhbz#597998
- Update nodedev scsi_host data before use
- Resolves: rhbz#600048
- Display wireless devices in nodedev list
- Resolves: rhbz#604811
- Show pool and domain persistence
- Resolves: rhbz#603696
- Fix cleanup after failing to hotplug a PCI device
- Resolves: rhbz#605168
- Add '-nodefconfig' command line arg to QEMU
- Resolves: rhbz#602778
- Switch to private redhat namespace for QMP I/O error reason
- Resolves: rhbz#586353
- Improve error messages for missing drivers & unsupported functions
- Resolves: rhbz#595609
- macvtap: get interface index if not provided
- Resolves: rhbz#605187
- Fix leaks in remote code
- Resolves: rhbz#603442
- Add an optional switch --uuid to the virsh vol-pool command
- Resolves: rhbz#604929
- Change per-connection hashes to be indexed by UUIDs
- Resolves: rhbz#603494
- Run virsh from libvirt-guests script with /dev/null on stdin
- Resolves: rhbz#606314
- Increase dd block size to speed up domain save
- Resolves: rhbz#601775
- Fix reference counting bugs on qemu monitor
- Resolves: rhbz#602660
- Add missing action parameter in IO error callback
- Resolves: rhbz#607157
-
Wed Jun 16 2010 Dave Allan <dallan@redhat.com> - 0.8.1-9
- Touch libvirt-guests lockfile
- Resolves: rhbz#566647
- Add qemu.conf option for clearing capabilities
- Resolves: rhbz#593903
- Add support for launching guest in paused state
- Resolves: rhbz#589465
- Add virsh vol-pool command
- Resolves: rhbz#602217
- Add vol commands to virsh man page
- Resolves: rhbz#600640
- Remove bogus migrate error messages
- Resolves: rhbz#601575
-
Thu Jun 10 2010 Dave Allan <dallan@redhat.com> - 0.8.1-8
- Ensure virtio serial has stable addressing
- Resolves: rhbz#586665
- SELinux socket labelling on QEMU monitor socket for MLS
- Resolves: rhbz#593739
- Fix enumeration of partitions in disks with a trailing digit in path
- Resolves: rhbz#593785
- Enable probing of VPC disk format type
- Resolves: rhbz#597981
- Delete UNIX domain sockets upon daemon shutdown
- Resolves: rhbz#598163
- Fix Migration failure 'canonical hostname pointed to localhost'
- Resolves: rhbz#589864
- Fix up the python bindings for snapshotting
- Resolves: rhbz#591839
- Sanitize pool target paths
- Resolves: rhbz#593565
- Prevent host network conflicts
- Resolves: rhbz#594494
- Support 802.1Qbg and bh (vnlink/VEPA) (refresh)
- Resolves: rhbz#590110
-
Wed May 26 2010 Dave Allan <dallan@redhat.com> - 0.8.1-7
- Fix sign extension error in libvirt's parsing of qemu options
- Resolves: rhbz#592070
- Graceful shutdown/suspend of libvirt guests on host shutdown
- Resolves: rhbz#566647
- Fix pci device hotplug
- Resolves: rhbz#572867
- Support 802.1Qbg and bh
- Resolves: rhbz#532760, rhbz#570949, rhbz#590110, rhbz#570923
-
Wed May 19 2010 Dave Allan <dallan@redhat.com> - 0.8.1-6
- Support seamless migration of SPICE graphics clients (refresh)
- Resolves: rhbz#591551
- Fix swapping of PCI vendor & product names in udev backend
- Resolves: rhbz#578419
- Fix cgroup setup code to cope with root squashing NFS
- Resolves: rhbz#593193
- Fix startup error reporting race
- Resolves: rhbz#591272
-
Tue May 18 2010 Dave Allan <dallan@redhat.com> - 0.8.1-5
- Don't reset user/group/security label for any files on shared filesystems
- Resolves: rhbz#578889
- Make saved state labelling ignore the dynamic_ownership parameter
- Resolves: rhbz#588562
- Fix & protect against NULL pointer dereference in monitor code
- Resolves: rhbz#591076
- Fix virFileResolveLink return value
- Resolves: rhbz#591363
- Add support for SSE4.1 and SSE4.2 CPU features
- Resolves: rhbz#592977
-
Fri May 14 2010 Dave Allan <dallan@redhat.com> - 0.8.1-4
- query QEMU to get the actual allocated extent of a block device
- Resolves: rhbz#526289
-
Wed May 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-3
- missing python bindings due to older XML api
- Resolves: rhbz#589453
- Fix two possible crashes in JSON event dispatch
- Resolves: rhbz#586353
- Fix handling of disk backing stores with cgroups
- Resolves: rhbz#581476
- virsh schedinfo --set error handling on unknow parameters
- Resolves: rhbz#586632
- Apply extra patches for nwfilter
- Resolves: rhbz#588554
- Fix hang during concurrent guest migrations
- Resolves: rhbz#582278
-
Fri May 07 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-2
- Don't wipe generated iface target in active domains (588046)
- Fix LXC domain lookup and error handling (586361)
- Fix a protocol breakage introduced in libvirt-0.8.0
- Add support for nic hotplug in QEMU/KVM (589978)
- Seemless migration of spice graphics clients (589989)
- fix build with ESX support
- Resolves: rhbz#581966
- fix multilib problem (587231)
-
Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
- Rebase to upstream 0.8.1
- Resolves: rhbz#558761
-
Fri Apr 23 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-4
- Fix libvirtd startup when avahi failed to look up local host name
- CPU selection fixes
- Resolves: rhbz#581627
- fix migration poll value
- Resolves: rhbz#584928
- crash dump job caused libvirt hang
- Resolves: rhbz#580853
- Fix initial VCPU pinning in qemu driver
- Resolves: rhbz#578434
- fix cpu hotplug command names
-
Tue Apr 20 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-3
- Build ESX support in
- Resolves: rhbz#581966
- a batch of network filter fixes, IBM request and upstream fixes
- Resolves: rhbz#579993
- couple of patchs to fix device handling with QMP
- Related: rhbz#563189
- fix python binding for snapshotting
- spec file fixes for nwfiler build and RHEL-5 virt-v2v specific rebuild
-
Tue Apr 13 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.0-2
- Refresh SPICE patches to fix test failures
- Related: rhbz#515265, rhbz#524623, rhbz#573382
- Enable test suite during build, disabling tests that don't work in mock
- Related: rhbz#558761
-
Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
- official 0.8.0 upstream release
- Resolves: rhbz#558761
- new patch set of patches for RHEL-6 SPICE and addons
- Enable QMP/ JSON mode in the QEMU monitor
- Resolves: rhbz#563189
- Support configuration of SPICE as a graphics protocol
- Resolves: rhbz#515265
- vnc (and spice) ticketing
- Resolves: rhbz#524623
- enable spice tls encryption in domainXML, and which channels are encrypted
- Resolves: rhbz#573382
- notification of VNC/SPICE client disconnect/connect events
- Resolves: rhbz#515268
-
Wed Apr 07 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-0.pre20100407
- preview #4 for 0.8.0 rebase
- snapshot API
- domain with disk on root-squashing nfs and security driver mismatch
- Resolves: rhbz#578630
- Fail to read xml when restore domain
- Resolves: rhbz#577719
- loop "virsh cd" in virsh interactive terminal generate unknown error
- Resolves: rhbz#572380
- support setting qemu's -drive werror=stop/enospc with configuration
- Resolves: rhbz#526231
-
Tue Mar 30 2010 Daniel Veillard <veillard@redhat.com> - 0.7.8-0.pre20100330
- preview #3 for 0.7.8 rebase
- kvm hpet support
- Resolves: rhbz#576973
- hook scripts support
- Resolves: rhbz#569965
- Need to add time keeping abstraction
- Resolves: rhbz#557285
- notification of guest reboot
- Resolves: rhbz#527572
- Ability to preserve RTC clock adjustments across guest reboots
- Resolves: rhbz#515273
- Notifications of guest stopping due to disk I/O errors
- Resolves: rhbz#515270
- VNC ticketing support (524623) spice still needed
- VNC client disconnect/connect events (515268) spice still needed
-
Mon Mar 22 2010 Daniel Veillard <veillard@redhat.com> - 0.7.8-0.pre20100322
- preview #2 for 0.7.8 rebase
- migration max downtime API
- Resolves: rhbz#561935
- allow suspend during migration
- Resolves: rhbz#561934
- support vhost net mode at qemu startup for net devices
- Resolves: rhbz#540391
- read-only device access support for qemu
- Resolves: rhbz#556769
- LSB compliance of libvirtd init script
- Resolves: rhbz#538701
- No domain vcpu information output when using JSON monitor
- Resolves: rhbz#572051
- "qemudDomainSetMaxMemory" does not work and should be removed
- Resolves: rhbz#572146
- after setvcpus, any virsh command will be hung
- Resolves: rhbz#572193
- virsh interactive terminal crash or hung
- Resolves: rhbz#572376
- virsh hangs after core dump
- Resolves: rhbz#572544
- Fix very slow file allocation on ext3
-
Fri Mar 12 2010 Daniel Veillard <veillard@redhat.com> - 0.7.8-0.pre20100312
- preview for 0.7.8 rebase
- Extra non upstream basic patch for spice and XQL
- Resolves: rhbz#515264
- Resolves: rhbz#515265
- connected virsh dies with a SIGPIPE after libvirtd restart
- Resolves: rhbz#526656
- error when running logrotate on s/390x arch
- Resolves: rhbz#547514
-
Fri Mar 05 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
- macvtap support (rhbz#553348)
- async job handling (rhbz #515278)
- virtio channel (rhbz#515281)
- computing baseline CPU
- virDomain{Attach,Detach}DeviceFlags
- Improve libvirt error reporting for failed migrations (rhbz#528793)
- qemu driver support CPU hotplug (rhbz#533138)
- wrong (octal) device number for attaching USB devices (rhbz#549840)
- cannot save domain into root_squashing nfs export (rhbz#558763)
- assorted bug fixes and lots of cleanups
-
Wed Mar 03 2010 Daniel P. Berrange <berrange@redhat.com> - 0.7.6-4
- Fix balloon parameter name handling in JSON mode (rhbz #566261)
-
Fri Feb 26 2010 Daniel P. Berrange <berrange@redhat.com> - 0.7.6-3
- Fix balloon units handling in JSON mode (rhbz #566261)
- Invoke qmp_capabilities at monitor startup (rhbz #563189)
-
Wed Feb 10 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-2
- enable JSON interface, desactivated by default in 0.7.6
- Resolves: rhbz#563189
- make sure cgroups are installed and that cgconfig service is on
- Resolves: rhbz#531263
-
Wed Feb 03 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
- upstream release of 0.7.6
- Use QEmu new device adressing when possible
- Implement CPU topology support for QEMU driver
- Implement SCSI controller hotplug/unplug for QEMU
- Implement support for multi IQN
- a lot of fixes and improvements
- Resolves: rhbz#558761
-
Fri Jan 22 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-0.pre20100121
- push updated prerelease version of 0.7.6 for testing in Beta1
- Resolves: rhbz#515213
-
Thu Jan 21 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-0.pre20100121
- Push a prerelease version of 0.7.6 for testing in Beta1
- Allow specifying -cpu model/flags for qemu
- Resolves: rhbz#515213
- Add async qemu machine protocol to libvirt based on JSON QEmu API
- Resolves: rhbz#518701
- Allow for static PCI address assignment to all devices
- Resolves: rhbz#481924
- expose qemu's -fda fat:floppy feature (525074)
- configuration of virtual CPU topology (sockets, threads, cores) (538015)
- rewrite file chown'ing code to use security driver framework (547545 )
- cannot create a headless KVM virtual machine (548127)
- Improve virsh schedular parameters documentation (548485)
- Fail to delete a inactive pool using command "virsh pool-delete" (530985)
- virsh man page updation for using container (lxc:///) (528709)
- Command 'virsh vcpuinfo' returns libvirt error in RHEL6 with KVM (522829)
- Expose information about host CPU flags in capabilities (518062)
-
Fri Jan 15 2010 Daniel P. Berrange <berrange@redhat.com> - 0.7.5-2
- Rebuild for libparted soname change (rhbz #555741)
-
Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
- Add new API virDomainMemoryStats
- Public API and domain extension for CPU flags
- vbox: Add support for version 3.1
- Support QEMU's virtual FAT block device driver
- a lot of fixes
-
Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.4-1
- upstream release of 0.7.4
- udev node device backend
- API to check object properties
- better QEmu monitor processing
- MAC address based port filtering for qemu
- support IPv6 and multiple addresses per interfaces
- a lot of fixes
-
Thu Nov 19 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-6
- Really fix restore file labelling this time
-
Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-5
- Disable numactl on s390[x]. Again.
-
Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-4
- Fix QEMU save/restore permissions / labelling
-
Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-3
- Avoid compressing small log files (#531030)
-
Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-2
- Make libvirt-devel require libvirt-client, not libvirt
- Fix qemu machine types handling
-
Wed Oct 14 2009 Daniel Veillard <veillard@redhat.com> - 0.7.2-1
- Upstream release of 0.7.2
- Allow to define ESX domains
- Allows suspend and resulme of LXC domains
- API for data streams
- many bug fixes
-
Tue Oct 13 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-12
- Fix restore of qemu guest using raw save format (#523158)
-
Fri Oct 09 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-11
- Fix libvirtd memory leak during error reply sending (#528162)
- Add several PCI hot-unplug typo fixes from upstream
-
Tue Oct 06 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-10
- Create /var/log/libvirt/{lxc,uml} dirs for logrotate
- Make libvirt-python dependon on libvirt-client
- Sync misc minor changes from upstream spec
-
Tue Oct 06 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-9
- Change logrotate config to weekly (#526769)
-
Thu Oct 01 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-8
- Disable sound backend, even when selinux is disabled (#524499)
- Re-label qcow2 backing files (#497131)
-
Wed Sep 30 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-7
- Fix USB device passthrough (#522683)
-
Mon Sep 21 2009 Chris Weyl <cweyl@alumni.drew.edu> - 0.7.1-6
- rebuild for libssh2 1.2
-
Mon Sep 21 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-5
- Don't set a bogus error in virDrvSupportsFeature()
- Fix raw save format
-
Thu Sep 17 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-4
- A couple of hot-unplug memory handling fixes (#523953)
-
Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-3
- disable numactl on s390[x]
-
Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-2
- revamp of spec file for modularity and RHELs
-
Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
- Upstream release of 0.7.1
- ESX, VBox driver updates
- mutipath support
- support for encrypted (qcow) volume
- compressed save image format for Qemu/KVM
- QEmu host PCI device hotplug support
- configuration of huge pages in guests
- a lot of fixes
-
Mon Sep 14 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.2.gitfac3f4c
- Update to newer snapshot of 0.7.1
- Stop libvirt using untrusted 'info vcpus' PID data (#520864)
- Support relabelling of USB and PCI devices
- Enable multipath storage support
- Restart libvirtd upon RPM upgrade
-
Sun Sep 06 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.1.gitg3ef2e05
- Update to pre-release git snapshot of 0.7.1
- Drop upstreamed patches
-
Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-6
- Fix migration completion with newer versions of qemu (#516187)
-
Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-5
- Add PCI host device hotplug support
- Allow PCI bus reset to reset other devices (#499678)
- Fix stupid PCI reset error message (bug #499678)
- Allow PM reset on multi-function PCI devices (bug #515689)
- Re-attach PCI host devices after guest shuts down (bug #499561)
- Fix list corruption after disk hot-unplug
- Fix minor 'virsh nodedev-list --tree' annoyance
-
Thu Aug 13 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.0-4
- Rewrite policykit support (rhbz #499970)
- Log and ignore NUMA topology problems (rhbz #506590)
-
Mon Aug 10 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-3
- Don't fail to start network if ipv6 modules is not loaded (#516497)
-
Thu Aug 06 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-2
- Make sure qemu can access kernel/initrd (bug #516034)
- Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)
-
Wed Aug 05 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
- ESX, VBox3, Power Hypervisor drivers
- new net filesystem glusterfs
- Storage cloning for LVM and Disk backends
- interface implementation based on netcf
- Support cgroups in QEMU driver
- QEmu hotplug NIC support
- a lot of fixes
-
Fri Jul 03 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
- release of 0.6.5
-
Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
- release of 0.6.4
- various new APIs
-
Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
- release of 0.6.3
- VirtualBox driver
-
Fri Apr 03 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
- release of 0.6.2
-
Wed Mar 04 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
- release of 0.6.1
-
Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
- release of 0.6.0
-
Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
- release of 0.5.0
-
Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
- release of 0.4.6
-
Mon Sep 08 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
- release of 0.4.5
-
Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
- release of 0.4.4
- mostly a few bug fixes from 0.4.3
-
Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
- release of 0.4.3
- lots of bug fixes and small improvements
-
Tue Apr 08 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
- release of 0.4.2
- lots of bug fixes and small improvements
-
Mon Mar 03 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
- Release of 0.4.1
- Storage APIs
- xenner support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements
-
Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
- Release of 0.4.0
- SASL based authentication
- PolicyKit authentication
- improved NUMA and statistics support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements
-
Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
- Release of 0.3.3
- Avahi support
- NUMA support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements
-
Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
- Release of 0.3.2
- API for domains migration
- APIs for collecting statistics on disks and interfaces
- lots of assorted bugfixes and cleanups
- documentation and localization improvements
-
Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
- Release of 0.3.1
- localtime clock support
- PS/2 and USB input devices
- lots of assorted bugfixes and cleanups
- documentation and localization improvements
-
Mon Jul 09 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
- Release of 0.3.0
- Secure remote access support
- unification of daemons
- lots of assorted bugfixes and cleanups
- documentation and localization improvements
-
Fri Jun 08 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
- Release of 0.2.3
- lot of assorted bugfixes and cleanups
- support for Xen-3.1
- new scheduler API
-
Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
- Release of 0.2.2
- lot of assorted bugfixes and cleanups
- preparing for Xen-3.0.5
-
Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
- don't require xen; we don't need the daemon and can control non-xen now
- fix scriptlet error (need to own more directories)
- update description text
-
Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
- Release of 0.2.1
- lot of bug and portability fixes
- Add support for network autostart and init scripts
- New API to detect the virtualization capabilities of a host
- Documentation updates
-
Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
- Fix loading of guest & network configs
-
Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
- Disable kqemu support since its not in Fedora qemu binary
- Fix for -vnc arg syntax change in 0.9.0 QEMU
-
Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
- Fixed path to qemu daemon for autostart
- Fixed generation of <features> block in XML
- Pre-create config directory at startup
-
Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
- support for KVM and QEmu
- support for network configuration
- assorted fixes
-
Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
- finish inactive Xen domains support
- memory leak fix
- RelaxNG schemas for XML configs
-
Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
- support for inactive Xen domains
- improved support for Xen display and vnc
- a few bug fixes
- localization updates
-
Thu Dec 07 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
- rebuild against python 2.5
-
Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
- better error reporting
- python bindings fixes and extensions
- add support for shareable drives
- add support for non-bridge style networking
- hot plug device support
- added support for inactive domains
- API to dump core of domains
- various bug fixes, cleanups and improvements
- updated the localization
-
Tue Nov 07 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
- it's pkgconfig not pgkconfig !
-
Mon Nov 06 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
- fixing spec file, added .el6, -devel requires pkgconfig and xen-devel
- Resolves: rhbz#202320
-
Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
- fix missing page size detection code for ia64
- fix mlock size when getting domain info list from hypervisor
- vcpu number initialization
- don't label crashed domains as shut off
- fix virsh man page
- blktapdd support for alternate drivers like blktap
- memory leak fixes (xend interface and XML parsing)
- compile fix
- mlock/munlock size fixes
-
Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
- Fix bug when running against xen-3.0.3 hypercalls
- Fix memory bug when getting vcpus info from xend
-
Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
- Support for localization
- Support for new Xen-3.0.3 cdrom and disk configuration
- Support for setting VNC port
- Fix bug when running against xen-3.0.2 hypercalls
- Fix reconnection problem when talking directly to http xend
-
Tue Sep 05 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
- patch from danpb to support new-format cd devices for HVM guests
-
Tue Sep 05 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
- reactivating ia64 support
-
Tue Sep 05 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
- new release
- bug fixes
- support for new hypervisor calls
- early code for config files and defined domains
-
Mon Sep 04 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
- add patch to address dom0_ops API breakage in Xen 3.0.3 tree
-
Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
- add patch to support paravirt framebuffer in Xen
-
Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
- another patch to fix network handling in non-HVM guests
-
Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
- patch to fix virParseUUID()
-
Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
- vCPUs and affinity support
- more complete XML, console and boot options
- specific features support
- enforced read-only connections
- various improvements, bug fixes
-
Wed Aug 02 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
- add patch from pvetere to allow getting uuid from libvirt
-
Wed Aug 02 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
- build on ia64 now
-
Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
- don't BR xen, we just need xen-devel
-
Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
- need rebuild since libxenstore is now versionned
-
Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
- Add BuildRequires: xen-devel
-
Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
- rebuild
-
Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
- support for HVM Xen guests
- various bugfixes
-
Mon Jul 03 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
- added a proxy mechanism for read only access using httpu
- fixed header includes paths
-
Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
- extend and cleanup the driver infrastructure and code
- python examples
- extend uuid support
- bug fixes, buffer handling cleanups
- support for new Xen hypervisor API
- test driver for unit testing
- virsh --conect argument
-
Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
- various fixes
- new APIs: for Node information and Reboot
- virsh improvements and extensions
- documentation updates and man page
- enhancement and fixes of the XML description format
-
Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
- added error handling APIs
- small bug fixes
- improve python bindings
- augment documentation and regression tests
-
Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
- new domain creation API
- new UUID based APIs
- more tests, documentation, devhelp
- bug fixes
-
Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
- fixes some problems in 0.0.3 due to the change of names
-
Wed Feb 08 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
- changed library name to libvirt from libvir, complete and test the python
bindings
-
Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
- upstream release of 0.0.2, use xend, save and restore added, python bindings
fixed
-
Wed Nov 02 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1
- created